Instrukcja obsługi I-PRO WV-S25600-V2LG

I-PRO Kamera monitorująca WV-S25600-V2LG

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla I-PRO WV-S25600-V2LG (27 stron) w kategorii Kamera monitorująca. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/27
1
WV-S25700-V2L
Installation Guide
Included Installation Instructions
Network Camera
For professional use only
Outdoor use
Model No. WV-S25700-V2L
WV-S25600-V2L
WV-S25500-V3L
WV-S25500-F6L
WV-S25500-F3L
About the user manuals
Product documentation is composed of the following documents.
• Provides information about “Precautions”, Installation Guide (this document):
“Precautions for installation” and the installation method.
• Provides information Basic Information (in the following manual website):
about “Precautions for use”, “Parts and functions” and “Detail specifications”.
• Explains how to Operating Instructions (in the following manual website):
perform the settings and how to operate this camera.
https://i-pro.com/products_and_solutions/en/surveillance/documentation-database
"<Control No.: C****>" used in these documents should be used to search for
information on our technical information website
(
https://i-pro.com/products_and_solutions/en/surveillance/learning-and-support/
knowledge-base/technical-information
) and will guide you to the right information.
• Before attempting to connect or operate this product, please read these instructions
carefully and save Important Safety Instructions leaflet for future use.
• microSDXC/ microSDHC/ microSD memory card is described as microSD memory card.
• The external appearance and other parts shown in this manual may differ from the actual product within the
scope that will not interfere with normal use due to improvement of the product.
C0724-0
PGQP3750ZA
Authorised Representative in EU:
i-PRO EMEA B.V.
Laarderhoogtweg 25, 1101 EB
Amsterdam, Netherlands
i-PRO EMEA B.V. UK Branch
1010 Cambourne Business Park,
Cambridgeshire CB23 6DP
© i-PRO Co., Ltd. 2024
Tokyo, Japan
https://www.i-pro.com/
2
Disposal of Old Equipment and Batteries
Only for European Union and countries with recycling systems
These symbols on the products, packaging, and/or accompanying documents mean that used
electrical and electronic products and batteries must not be mixed with general household waste.
For proper treatment, recovery and recycling of old products and used batteries, please take
them to applicable collection points in accordance with your national legislation.
By disposing of them correctly, you will help to save valuable resources and prevent any potential
negative effects on human health and the environment.
For more information about collection and recycling, please contact your local authority.
Penalties may be applicable for incorrect disposal of this waste, in accordance with national
legislation.
Note for the battery symbol (bottom symbol)
This symbol might be used in combination with a chemical symbol. In this case it complies with
the requirement set by the Directive for the chemical involved.
NOTE: This equipment has been tested and
found to comply with the limits for a Class A digi-
tal device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference when the
equipment is operated in a commercial environ-
ment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed
and used in accordance with the instruction man-
ual, may cause harmful interference to radio com-
munications.
Operation of this equipment in a residential area is
likely to cause harmful interference in which case
the user will be required to correct the interfer-
ence at his own expense.
FCC CAUTION: Changes or modifications not
expressly approved by the party responsible for
compliance could void the user’s authority to
operate the equipment.
Supplier’s Declaration of conformity
Trade name : i-PRO
Model No. : WV-S25700-V2L, WV-S25600-V2L,
WV-S25500-V3L, WV-S25500-F6L,
WV-S25500-F3L
Responsible Party :
i-PRO Americas Inc.
8550 Fallbrook Drive, Suite 200 Houston,
Texas 77064
Support Contact: 1-800-513-5417
For U.S.A.
CAN ICES-3(A)/NMB-3(A)
For Canada
The model number and serial number of this
product may be found on the surface of the
unit.
You should note the model number and serial
number of this unit in the space provided and
retain this book as a permanent record of your
purchase to aid identification in the event of
theft.
Model No.
Serial No.
For U.S.A.
This device complies with part 15 of the FCC
Rules.
Operation is subject to the following two condi-
tions : (1) This device may not cause harmful
interference, and (2) this device must accept
any interference received, including interference
that may cause undesired operation.
Méthode d’installation Vis de fixation recommandée
La capacité de traction
minimale requise
Installer la caméra vidéo sur le boîtier de groupe/
boîte de jonction à l’aide de la plaque de fixation. M4 x 16 mm {5/8 pouces} /
4 él.*　196 N {44 lbf}
Installer directement la caméra vidéo sur la surface
d’installation en utilisant la plaque de fixation.
Installer la caméra vidéo à l’aide de la platine de
fixation d’installation exclusivement conçue.
Se référer au manuel d’utilisation de chaque platine
de fixation.
* La longueur de la vis est un exemple lors de l’installation de la caméra au plafond ou sur un mur
robuste d’une épaisseur de 20 mm {25/32 pouces} ou plus.
For U.S.A.
3
WARNING:
• Operation of this product in a residential environment could cause radio interference.
Caution: Notice:
•
The DC power supply connected to the camera
must be in the same building.
•
The network camera is only intended for a
connection to an ethernet or PoE network without
routing to the outside plant.
•
This product has no power switch. Be sure
to install disconnect devices such as a circuit
breaker to shut down the main power of power
supplying equipment to this product.
•
Only connect 12 V DC Class 2 power supply
(UL 1310/CSA 223), limited power source (IEC/
EN/UL/CSA 60950-1, IEC/EN/UL/CSA 62368-1
Annex Q) or IEC/EN/UL/CSA 62368-1 PS2.
•
Before attempting to connect or operate this
product, please read these instructions carefully.
•
This product is not suitable for use in locations
where children are likely to be present.
•
Do not install this product in locations where
ordinary persons can easily reach.
•
This product is a professional equipment.
•
For information about screws and other parts
required for installation, refer to the corresponding
section of this document.
: Direct current symbol
Precautions
Do not insert any foreign objects.
Fire or electrical shock may be caused if water or any foreign objects, such as metal objects, enter inside
the unit.
Turn the power off immediately and contact qualified service personnel for service.
Do not use this product in an inflammable atmosphere.
Failure to observe this may cause an explosion resulting in injury.
Avoid installing this product in the locations where salt damage occurs or
corrosive gas is produced.
Otherwise, the mounting portions will deteriorate and injury or accidents due to a fall of the product may
occur.
Do not strike or give a strong shock to this product.
Failure to observe this may cause injury or fire.
Keep microSD memory cards away from infants and children.
Otherwise, they may swallow the cards by mistake.
In this case, consult a doctor immediately.
Do not hang down from this product or use this product as a pedestal.
Failure to observe this may cause injury or accidents.
Do not damage the power cable.
Do not damage, fabricate, twist, stretch, bundle, or forcibly bend the power cable.
Do not place heavy objects on it, and keep it away from heat sources.
Use of a damaged power cable may cause electric shock, short circuit, or fire.
Consult the dealer for repair.
Do not install this product on a place that is greatly influenced by wind.
Installation on a place where the wind speed is 60 m/s {approx. 134 mph} or more may cause a fall of the
product resulting in injury or accidents.
Do not sprinkle more water, exceeding the performance limit of waterproof with a
high pressure cleaning machine, etc.
Fire or electrical shock may be caused by immersion.

Specyfikacje produktu

Marka: I-PRO
Kategoria: Kamera monitorująca
Model: WV-S25600-V2LG

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z I-PRO WV-S25600-V2LG, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Kamera monitorująca I-PRO

I-PRO

I-PRO WV-S2536LA Instrukcja

17 Grudnia 2024
I-PRO

I-PRO WV-S2536LTA Instrukcja

17 Grudnia 2024
I-PRO

I-PRO WV-S25500-F3L Instrukcja

17 Grudnia 2024
I-PRO

I-PRO WV-S25500-F6L Instrukcja

17 Grudnia 2024
I-PRO

I-PRO WV-S25600-V2L Instrukcja

17 Grudnia 2024
I-PRO

I-PRO WV-S25500-V3L Instrukcja

17 Grudnia 2024
I-PRO

I-PRO WV-S25500-V3LN1 Instrukcja

17 Grudnia 2024
I-PRO

I-PRO WV-S25600-V2LG Instrukcja

17 Grudnia 2024
I-PRO

I-PRO WV-S25700-V2LG Instrukcja

17 Grudnia 2024
I-PRO

I-PRO WV-S25700-V2L Instrukcja

17 Grudnia 2024

Instrukcje Kamera monitorująca

Najnowsze instrukcje dla Kamera monitorująca

Bolin Technology

Bolin Technology Blue Line B7-220 Instrukcja

17 Grudnia 2024
Bolin Technology

Bolin Technology Blue Line B2-220 Instrukcja

17 Grudnia 2024
Bolin Technology

Bolin Technology VCC-M2H10BI-4FN1 Instrukcja

17 Grudnia 2024
Bolin Technology

Bolin Technology FEX-SN-M02202021 Instrukcja

16 Grudnia 2024
Vimar

Vimar ELVOX 693T Instrukcja

15 Grudnia 2024
Bea-fon

Bea-fon Safer 1S Instrukcja

15 Grudnia 2024
Bea-fon

Bea-fon Tracer 1T Instrukcja

15 Grudnia 2024
Vtech

Vtech VC7002 Instrukcja

14 Grudnia 2024
Vtech

Vtech VC7001 Instrukcja

14 Grudnia 2024
D-Link

D-Link DCS-8330LH Instrukcja

13 Grudnia 2024