Instrukcja obsługi I-PRO WV-U65301-Z1

I-PRO Kamera monitorująca WV-U65301-Z1

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla I-PRO WV-U65301-Z1 (2 stron) w kategorii Kamera monitorująca. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/2

Lion Audio ‘Lion Face’ logo, BLA,

PG-2R are trademarks or registered

trademarks of Black Lion Audio.

Designed in Chicago, USA. Made in China.

RAD Distribution | 180 Carpenter Ave.

Middletown, NY 10940

This manual and any associated intel-

lectual property are subject to copyright

protection. No part of this document may

be reproduced in any form without explicit

written consent from Black Lion Audio.

Notice

This manual provides general information, preparation for

use, installation and operating instructions for the Black Lion

Audio PG-2R regulator/power conditioner.

The information contained in this manual is subject to

change without notice. Black Lion Audio makes no warran-

ties of any kind with regard to this manual, including, but not

limited to, the implied warranties of merchantability and t-

ness for a particular purpose. Black Lion Audio shall not be

liable for errors contained herein or direct, indirect, special,

incidental, or consequential damages in connection with the

furnishing, performance, or use of this material.

PG-2R

Studio-grade regulator/power conditioner

with surge protection

Owner’s Manual

SPECIFICATIONS

Voltage 120VAC 15A max

AC Mains Input Powercon Socket 15A

Dimensions Width 438mm (19”)

Height 88mm (2U)

Depth 250mm

Weight 10.52 kg (23.2 lbs)

Note: Connect analog equipment to analog outlets and digital

to digital to benet from the optimal ltering provided by each

outlet type. While this is the recommended connection method,

know that no harm will come to your equipment as a result of

connecting analog gear to a digital outlet or vice-versa.

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat regis-

ters, stoves, or other apparatus that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type

plug. A polarized plug has two blades with one wider than the other.

A grounding-type plug has two blades and a third grounding prong.

The wide blade or third prong is provided for your safety. If the pro-

vided plug does not t into your outlet, consult an electrician for

replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particular-

ly at plugs, convenience receptacles, and the point where they exit

from the apparatus. If the power cord becomes frayed, stop using

immediately.

11. Use only attachments/accessories specied by the manufacturer

12. Use only with a cart, stand, tripod, bracket or table specied by the

manufacturer, or sold with the apparatus. When a cart is used, use

caution when moving the cart/apparatus combination to avoid in-

jury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for

long periods of time.

14. Refer all servicing to qualied service personnel. Servicing is re-

quired when the apparatus has been damaged in any way, such as

power supply cord or plug is damaged, liquid has been spilled or

objects have fallen into the apparatus, the apparatus has been ex-

posed to rain or moisture, does not operate normally, or has been

dropped.

15. This apparatus shall not be exposed to dripping or splashing, and

no object lled with liquids, such as vases, shall be placed on the

apparatus.

16. Note that this apparatus is not completely disconnected from the

AC mains service when the power switch is in the OFF position.

17. The mains plug or power inlet on the product is used as the discon-

nect device, so the disconnected device shall remain readily opera-

ble when reconnected.

18. Any changes or modications not expressly approved in this manu-

al could void your authority to operate this apparatus.

IMPORTANT !

Be sure to use a three prong AC cable that properly ts the power

source. Please use the correct fuse designated on the rear panel be-

fore plugging in the power cord. Improper selection can result in dam-

age to the unit that will not be covered under the warranty.

The lightning ash with an arrow-

head symbol within an equilateral

triangle is intended to alert the

user to the presence of uninsu-

lated “dangerous voltage” within

the product’s enclosure that may

be of sucient magnitude to

constitute a risk of electric shock

to persons. The PG-2R is only compatible with a 15-amp circuit and is

not to be used with a 20-amp circuit.

The exclamation point within an equilateral triangle is intended to alert

the user to the presence of important operating and maintenance

(servicing) instructions in the literature accompanying the product.

IEC

62368

This product complies with all international standards for safety and

emissions including IEC62368 and FCC Part 15-B.

Do not attempt to service this unit yourself, as it will void your warran-

ty. Please check your unit carefully upon receipt and return to place

of purchase immediately if there are any problems with the product.

After that, the standard Black Lion Audio 3 YEAR warranty will apply

to defects in materials and workmanship.

Should your Black Lion Audio product require service,

please contact us on our customer service site:

https://www.blacklionaudio.com/contact. You must obtain an RA #

(Return Authorization number) from us before shipping a unit back to

us. This RA # must be clearly written on the outside of the box.

Please safely pack the units… It is best to use the original packing

materials. Black Lion Audio cannot be responsible for any damag-

es incurred in shipping to us due to poor packaging. PLEASE PACK

CAREFULLY and FULLY INSURE THE SHIPMENT.

INTERNATIONAL

For service or warranty assistance, please contact the Black Lion Au-

dio distributor in your country through the dealer from whom you pur-

chased this product.

LIMITED 3 YEAR WARRANTY

Black Lion Audio’s PG-2R is warranted by Black Lion Audio to be free

from defects in materials and workmanship for the period of THREE

(3) YEARS to the original purchaser. In the event of such defects, the

product will be repaired without charge or, at our option, replaced with

a new one if delivered to Black Lion Audio prepaid, together with a copy

of the sales slip or other proof of purchase date. The warranty excludes

problems due to normal wear, abuse, shipping damage or failure to use

the product in accordance with the specications.

All parts and labor are covered under this Limited Warranty. However,

if it is determined by Black Lion Audio that the device was damaged or

made defective through abuse, we reserve the right to charge the cus-

tomer for the cost of the repair.

Black Lion Audio shall not be liable for damages based upon inconve-

nience, loss of use of the product, loss of time, interrupted operation or

commercial loss or any other damages, whether incidental, consequen-

tial or otherwise. This warranty gives you specic legal rights, and you

may have other rights, which will vary from state to state.

This warranty is not transferable.

QUICK START GUIDE

Once you have installed your PG-2R where you need it, connect it to an

appropriate power source. If you are not sure your source is correct,

consult with your local power company.

Plug in your equipment to the appropriate outlets on the PG-2R.

Turn on the power. The digital and analog outlets are switched with a

delay sequence. The digital and analog outputs turn on with the power

switch and turn off after a six-second delay. The high-current outputs

turn on after six seconds and turn off with the power switch. This allows

any startup sequences to be nished before the high-current devices

are turned on. Regulated Outputs have a tight ± 2v tolerance. Unit will

fully regulate at a minimum input of 96 volts.

1. ON/OFF Switch: Once the PG-2R is plugged into a grounded

230VAC outlet, turning the front panel POWER switch to the ON

position will sequentially power the components plugged into the

rear panel outlets.

2. GROUND OK: When this is on, the PG-2R is plugged into a properly

grounded power source. If the LED is not on, unplug the unit from

the power source and correct the fault.

3. Wiring Fault: This indicates the LINE and NEUTRAL wires in the

source are reversed. Unplug the unit immediately and consult an

electrician to x the fault.

4. Clean Power On: This LED indicates that the PG-2R is providing

clean, beautiful AC power to all connected components.

5. Abnormal Voltage: When this LED blinks, the PG-2R is warning about

over voltage (greater than 133 VAC.) If voltage peaks above 140 VAC

or drops to 95 VAC, the PG-2R will shut down to protect connected

equipment.

6. Protection ON: When this LED is on, the PG-2R’s power surge cir-

cuitry is functioning correctly. If this LED is OFF, the circuit has mal-

functioned. If it is OFF, unplug the unit immediately.

7. Regulation ON: When this LED is on, The PG-2R’s Regulation circuit

is functioning correctly and is currently regulating output voltage.

If this LED is OFF, the input voltage is close enough to 120v to not

require regulation.

8. Digital Audio (Switched) Outlets: These outlets have a special lter

circuit that is designed to reduce AC supply interference that can

induce jitter in digital clocking. These outlets also isolate the rest

of your system from noise generated by the digital components

themselves.

9. Analog Audio Filter (Switched) Outlets: These outlets have a spe-

cial lter circuit that reduces audible noise in your analog compo-

nents (mixers, dynamic effects, etc.)

10. High Current Filter (Timed) Outlets: These outlets have a spe-

cial lter circuit designed to handle high current components like

power ampliers or Active Speakers. These are the rst outlets to

power off and the last to power on via power sequencing, to avoid

speaker pops.

11. Gold-plated ground post: Provides a connection point for any un-

grounded components.

12. Thermal Circuit Breaker: protects the PG-2R from power overload.

13. Breaker Open: When this LED is on, the thermal circuit breaker has

tripped due to an overload. Before resetting the breaker, nd the

reason for the overload.

14. Ultra-high Current AC PowerCon Socket: Connect the included

ve-foot PowerCon AC cable to maximize power transfer to high

current components such as ampliers. Aftermarket PowerCon

cables of up to 15’ can be used.

15. Front Dimmer: This know controls a exible accessory light. Push

on/off and turn clockwise for brightness.

16. Front 12V XLR Lamp Socket: Provides 12VDC on PIN-2 to an acces-

sory lamp.

17. Rear Dimmer: This knob controls a exible accessory light. Push

on/off and turn clockwise for brightness.

18. Rear 12V XLR Lamp Socket: Provides 12VDC on PIN-2 to an acces-

sory lamp.

19. Input Voltage Meter: Three-character LED displays the line voltage

at the input source.

20. Regulation Stage Meter: Two-character LED displays the number

of regulation stages being applied to the input voltage; six stages.±

21. Amperage Meter: Three-character LED displays the amperage

used by equipment plugged into the PG-2R.

22. Unswitched Convenience Outlets: These are “always-on” unl-

tered, unregulated power outlets.

23. USB-C Charger: 100 watt, 5 volt convenience charger for USB-C

mobile devices and laptops.

24. USB Charger: 5V1A convenience charger for USB devices.

On with panel switch

off after six seconds

On after three seconds

off after three seconds

On after six seconds

off with panel switch

20 2119 22151613 23 24

17 11

12 1

8 9 10 18 14

2 3 4 6 75

Specyfikacje produktu

Marka:	I-PRO
Kategoria:	Kamera monitorująca
Model:	WV-U65301-Z1

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z I-PRO WV-U65301-Z1, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Kamera monitorująca I-PRO

I-PRO WV-U2542LA Instrukcja

11 Grudnia 2024

I-PRO B-200-PTZ Instrukcja

11 Grudnia 2024

I-PRO WV-U2130LA Instrukcja

11 Grudnia 2024

I-PRO WV-X35402-F2LM Instrukcja

11 Grudnia 2024

I-PRO WV-S8531N Instrukcja

7 Grudnia 2024

I-PRO WV-U65301-Z1 Instrukcja

7 Grudnia 2024

I-PRO WV-S22600-V2LG Instrukcja

7 Grudnia 2024

I-PRO WV-S65301-Z1 Instrukcja

7 Grudnia 2024

I-PRO WV-SBV131M Instrukcja

8 Października 2024

I-PRO WV-SFV781L Instrukcja

8 Października 2024

Instrukcje Kamera monitorująca

Najnowsze instrukcje dla Kamera monitorująca

ClearOne Unite 260 Pro Instrukcja

11 Grudnia 2024

Imou Cubo1 Instrukcja

11 Grudnia 2024

Foscam PD5 Instrukcja

10 Grudnia 2024

TP-Link InSight S245 Instrukcja

10 Grudnia 2024

Foscam R8M Instrukcja

10 Grudnia 2024

AViPAS AV-2000W Instrukcja

10 Grudnia 2024

Abus TVVR33602 Instrukcja

9 Grudnia 2024

Abus TAS102 Instrukcja

9 Grudnia 2024

AVer UE1 Instrukcja

8 Grudnia 2024

Hikvision DS-2TD2637-15 Instrukcja

8 Grudnia 2024