Instrukcja obsługi Husqvarna R 120S
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Husqvarna R 120S (88 stron) w kategorii kosiarka. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/88
EEEEnnnngggglllliiiisssshhhh ((((2222----22228888))))
FFFFrrrreeeennnncccchhhh ((((22229999----55557777))))
SSSSppppaaaannnniiiisssshhhh ((((55558888----88885555))))
R 120S
Operator’s manual Manuel d’utilisation
Manual de instrucciones
Please read the operator’s manual carefully and make sure you understand the instructions before using the machine.
Liattentivement et bien assimiler le manuel d’utilisation avant d’utiliser la machine.
Lea detenidamente el manual de instrucciones y asegúrese de entender su contenido antes de utilizar la máquina
2 –
English
CONTENTS
Contents
CONTENTS
Contents ...................................................................... 2
INTRODUCTION
Dear customer! ............................................................ 3
Driving and transport on public roads .......................... 3
Towing .......................................................................... 3
Use .............................................................................. 3
Good service ................................................................ 3
Service journal
Pre-delivery service ..................................................... 4
After the first 8 hours ................................................... 4
KEY TO SYMBOLS
Symbols ....................................................................... 5
SAFETY INSTRUCTIONS
Safety instructions ........................................................ 8
Driving on slopes ......................................................... 9
Children ....................................................................... 10
Maintenance ................................................................ 10
Transport ...................................................................... 11
WHAT IS WHAT?
Location of the controls ................................................ 12
PRESENTATION
Presentation ................................................................. 13
Cutting unit ................................................................... 13
Seat ............................................................................. 14
Fueling ......................................................................... 14
Release lever ............................................................... 14
Driving
Before starting ............................................................. 15
Start the engine ........................................................... 15
Starting the engine with a weak battery ....................... 16
Driving the Rider .......................................................... 16
Cutting tips .................................................................. 17
Stop the engine ............................................................ 17
Maintenance
Maintenance schedule ................................................. 18
Cleaning ....................................................................... 19
Removing of the machine hoods ................................. 19
Checking and adjusting the steering wires .................. 20
Adjusting the brake ...................................................... 20
Adjusting the throttle wire ............................................ 20
Replacing the air filter .................................................. 21
Replacement of fuel filter ............................................. 21
Checking the fuel pump’s air filter ................................ 21
Checking the Tire Pressure .......................................... 22
Ignition system ............................................................. 22
Fuses ........................................................................... 22
Check the safety system .............................................. 22
Checking the engine’s cooling air intake ...................... 22
Service position for the cutting unit .............................. 23
Checking the blades .................................................... 24
Lubrication
Checking the engine’s oil level. .................................... 25
Replacing the engine oil .............................................. 25
Lubricating the front wheel bearings ............................ 25
General lubrication ....................................................... 25
Troubleshooting schedule
Troubleshooting schedule ............................................. 25
Storage
Winter storage .............................................................. 27
Service ......................................................................... 27
TECHNICAL DATA
Original instructions .................................................... 27
English – 3
INTRODUCTION
Dear customer!
Thank you for choosing a Husqvarna Rider. Husqvarna Riders are built to a unique design with a front-mounted cutting deck and
a patented articulated steering. Riders are designed for maximum efficiency even in small or confined areas. The closely grouped
controls and pedal-operated hydrostatic transmission also contribute to the performance of this machine.
This operator’s manual is a valuable document. By following its instructions (on operation, service, maintenance, etc.) you will
significantly extend the life of the machine and even its second-hand value.
When you sell your Rider, make sure you pass on the operator’s manual to the new owner.
The last chapter in the operator’s manual consists of a Service Journal. Make sure that all service work and repairs are recorded.
A well-documented service history reduces the costs of seasonal maintenance and influences the second-hand value of the
machine. Bring the operator’s manual with the Rider when bringing it to a workshop for service procedures.
Driving and transport on public roads
Check the relevant road traffic regulations before driving the machine on a public road. If transporting the machine on another
vehicle always use approved securing devices and make sure that the machine is securely held.
Towing
When your machine is equipped with a hydrostatic transmission you should only tow the machine over short distances and at a
low speed, otherwise there is a risk of damaging the transmission.
The power transmission must be disengaged when towing, see the instructions under the heading Release lever.
Use
This ride-on mower is designed to mow grass on open and level ground surfaces and sloped surfaces that do not exceed 10
degrees. In addition, there is a number of accessories recommended by the manufacturer that broadens the application area.
Please contact your dealer for more information about which accessories are available. The machine may only be used with the
equipment recommended by the manufacturer. All other types of use should be avoided. Compliance with and strict adherence to
the conditions of operation, service and repair as specified by the manufacturer also constitute essential elements of the intended
use.
This machine should be operated, serviced and repaired only by persons who are familiar with its particular characteristics and
who are acquainted with the relevant safety procedures.
Accident prevention Recommendations, all other generally recognized regulations on safety and occupational medicine, and all
road traffic regulations must be observed at all times.
Any arbitrary modifications carried out to this machine may relieve the manufacturer of liability for any resulting damage or injury.
Good service
Husqvarna products are sold all over the world and ensures that you, the customer, get the best support and service. For example,
before this machine was delivered it was inspected and adjusted by your dealer. See the certificate in the Service Journal in this
manual.
When you need spare parts or advice on service issues, warranty terms, etc., contact:
On the machine's rating plate you will find the following information:
• The machines type designation.
• The manufacturer’s type number.
• The machine’s serial number.
State the type designation and serial number when ordering spare parts.
This Operator’s Manual belongs to machine with
serial number:
Motor Transmission
Specyfikacje produktu
| Marka: | Husqvarna |
| Kategoria: | kosiarka |
| Model: | R 120S |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Husqvarna R 120S, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje kosiarka Husqvarna
8 Października 2024
7 Października 2024
7 Października 2024
4 Października 2024
22 Września 2024
19 Września 2024
16 Września 2024
16 Września 2024
15 Września 2024
12 Września 2024
Instrukcje kosiarka
- kosiarka Electrolux
- kosiarka Worx
- kosiarka Braun
- kosiarka Honda
- kosiarka Philips
- kosiarka SilverCrest
- kosiarka Stihl
- kosiarka Bosch
- kosiarka Yato
- kosiarka Parkside
- kosiarka Stiga
- kosiarka Toolcraft
- kosiarka Kärcher
- kosiarka Severin
- kosiarka Panasonic
- kosiarka MacAllister
- kosiarka Stanley
- kosiarka Black & Decker
- kosiarka OK
- kosiarka Scheppach
- kosiarka Adler
- kosiarka BaByliss
- kosiarka Marquant
- kosiarka Lider
- kosiarka Conair
- kosiarka Ardes
- kosiarka Taurus
- kosiarka Orbegozo
- kosiarka Blaupunkt
- kosiarka Grizzly
- kosiarka Gardena
- kosiarka DeWalt
- kosiarka Einhell
- kosiarka Grundig
- kosiarka Remington
- kosiarka Hyundai
- kosiarka Rowenta
- kosiarka Mesko
- kosiarka ECG
- kosiarka Makita
- kosiarka Hecht
- kosiarka Viking
- kosiarka Rapid
- kosiarka Ozito
- kosiarka Draper
- kosiarka Fuxtec
- kosiarka Orbex
- kosiarka Trisa
- kosiarka RYOBI
- kosiarka NAC
- kosiarka Wolf Garten
- kosiarka Zelmer
- kosiarka Eurogarden
- kosiarka Cobra
- kosiarka Handy
- kosiarka Yard Force
- kosiarka Bomann
- kosiarka Garden Feelings
- kosiarka Baumr-AG
- kosiarka Biltema
- kosiarka Sovereign
- kosiarka CMI
- kosiarka SABO
- kosiarka Beper
- kosiarka Kubota
- kosiarka Sterwins
- kosiarka MPM
- kosiarka Meec Tools
- kosiarka AL-KO
- kosiarka Güde
- kosiarka Pyle
- kosiarka Segway
- kosiarka Texas
- kosiarka ATIKA
- kosiarka Wahl
- kosiarka Bavaria
- kosiarka Cecotec
- kosiarka AFK
- kosiarka Zipper
- kosiarka Camry
- kosiarka Flymo
- kosiarka Faworyt
- kosiarka Scarlett
- kosiarka TriStar
- kosiarka MTD
- kosiarka First Austria
- kosiarka Fiskars
- kosiarka Aurora
- kosiarka Florabest
- kosiarka Hanseatic
- kosiarka Solo
- kosiarka Ferrex
- kosiarka G3 Ferrari
- kosiarka Ergotools Pattfield
- kosiarka Clatronic
- kosiarka NEO Tools
- kosiarka Oregon Scientific
- kosiarka Rover
- kosiarka Princess
- kosiarka GA.MA
- kosiarka Ferm
- kosiarka Hitachi
- kosiarka Herkules
- kosiarka Moser
- kosiarka Craftsman
- kosiarka EcoFlow
- kosiarka Robomow
- kosiarka Fieldmann
- kosiarka Homelite
- kosiarka Gardenline
- kosiarka PowerPlus
- kosiarka Sencor
- kosiarka Vonroc
- kosiarka Tesco
- kosiarka Spear & Jackson
- kosiarka HiKOKI
- kosiarka McCulloch
- kosiarka Proviel
- kosiarka Becken
- kosiarka OKAY
- kosiarka Masport
- kosiarka GARDA
- kosiarka Powerbase
- kosiarka Bestgreen
- kosiarka Zoofari
- kosiarka Toro
- kosiarka Comelec
- kosiarka Cotech
- kosiarka Skil
- kosiarka Cocraft
- kosiarka NAX
- kosiarka Snow Joe
- kosiarka Greenworks
- kosiarka Yellow Garden Line
- kosiarka OBH Nordica
- kosiarka Challenge
- kosiarka Bestron
- kosiarka Alpina
- kosiarka Ambrogio
- kosiarka Powerworks
- kosiarka AS Motor
- kosiarka Ashiko
- kosiarka Walker
- kosiarka Saturn
- kosiarka ACG
- kosiarka Oster
- kosiarka Sinbo
- kosiarka Jata
- kosiarka Logik
- kosiarka Sun Joe
- kosiarka Mellerware
- kosiarka Termozeta
- kosiarka Eldom
- kosiarka Maxxmee
- kosiarka Tanaka
- kosiarka King
- kosiarka Hustler
- kosiarka Troy-Bilt
- kosiarka Topcraft
- kosiarka Gamma
- kosiarka John Deere
- kosiarka Aqua Joe
- kosiarka Kress
- kosiarka Dolmar
- kosiarka Mountain Buggy
- kosiarka Team
- kosiarka Mountfield
- kosiarka McGregor
- kosiarka Qualcast
- kosiarka Varo
- kosiarka Pattfield
- kosiarka Defort
- kosiarka IKRA
- kosiarka JCB
- kosiarka Kibani
- kosiarka Coline
- kosiarka Eliet
- kosiarka Echo
- kosiarka VARI
- kosiarka Klippo
- kosiarka Zoef Robot
- kosiarka Carmen
- kosiarka Valera
- kosiarka Powerblade
- kosiarka Hayter
- kosiarka Gianni Ferrari
- kosiarka Ariens
- kosiarka Andis
- kosiarka Grouw
- kosiarka Lumag
- kosiarka McConnel
- kosiarka Yard Machines
- kosiarka Central Park
- kosiarka Gtech
- kosiarka Park
- kosiarka Graphite
- kosiarka Snapper
- kosiarka Sanli
- kosiarka CentralPark
- kosiarka Levita
- kosiarka Efco
- kosiarka Blackline
- kosiarka Brill
- kosiarka Gardol
- kosiarka Atco
- kosiarka Gartenmeister
- kosiarka Plantiflor
- kosiarka Powertec Garden
- kosiarka Lux Tools
- kosiarka Orec
- kosiarka Scotts
- kosiarka Chapin
- kosiarka Giardino
- kosiarka Germania
- kosiarka Garden Gear
- kosiarka Anova
- kosiarka Hurricane
- kosiarka Budget
- kosiarka Fleurelle
- kosiarka Deltafox
- kosiarka Palmera
- kosiarka Yardforce
- kosiarka Murray
- kosiarka PLUS
- kosiarka PowerG
- kosiarka LEA
- kosiarka Yamabiko
- kosiarka Jacobsen
- kosiarka Exgain
- kosiarka Stabilo
- kosiarka Robot Mower
- kosiarka Garden
- kosiarka Toledo
- kosiarka Earthwise
- kosiarka Practixx
- kosiarka Belrobotics
- kosiarka Mr Gardener
- kosiarka Einhell Royal
- kosiarka Ransomes
- kosiarka Kingcraft
- kosiarka Mac Allister
- kosiarka Jonsered
- kosiarka Gude Pro
- kosiarka Green Technology
- kosiarka Do It Garden
- kosiarka Victa
- kosiarka Robust
- kosiarka Ultranatura
- kosiarka Shav
- kosiarka LawnMaster
- kosiarka G-Technology
- kosiarka Morrison
- kosiarka Cub Cadet
- kosiarka Maxbear
- kosiarka Lawn Star
Najnowsze instrukcje dla kosiarka
13 Marca 2025
12 Marca 2025
10 Marca 2025
5 Marca 2025
5 Marca 2025
5 Marca 2025
27 Lutego 2025
15 Stycznia 2025
15 Stycznia 2025
13 Stycznia 2025