Instrukcja obsługi Husqvarna 576 XP

Husqvarna Zaagmachine 576 XP

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Husqvarna 576 XP (44 stron) w kategorii Zaagmachine. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/44

EEEEnnnngggglllliiiisssshhhh

570 576 XP 576 XPG

Operator s manual′

Please read the operator’s manual carefully and make sure you understand the instructions before using the machine.

KEY TO SYMBOLS

2 – English

Symbols on the machine:

WARNING! Chain saws can be

dangerous! Careless or incorrect use

can result in serious or fatal injury to the

operator or others.

Please read the operator’s manual

carefully and make sure you

understand the instructions before

using the machine.

Always wear:

• Approved protective helmet

• Approved hearing protection

• Protective goggles or a visor

This product is in accordance with

applicable EC directives.

Noise emission to the environment

according to the European Community’s

Directive. The machine’s emission is

speciﬁed in chapter Technical data and

on label.

Decompression valve: The valve is to

reduce the pressure in the cylinder and

make starting easier. You should always

use the decompression valve when

starting the machine.

Ignition; choke: Set the choke control

in the choke position. This should

automatically set the stop switch to the

start position.

Refuelling.

Chain oil ﬁll.

If your machine bears this symbol it is

equipped with heated handles.

Adjustment of the oil pump

Chain brake, activated (right)

Chain brake, not activated (left)

Other symbols/decals on the machine refer to special

certiﬁcation requirements for certain markets.

Symbols in the operator’s

manual:

Switch off the engine by moving the stop

switch to the STOP position before

carrying out any checks or

maintenance.

Always wear approved protective

gloves.

Regular cleaning is required.

Visual check.

Protective goggles or a visor must be

worn.

Refuelling.

Filling with oil and adjusting oil ﬂow.

The chain brake must be engaged when

the chain saw is started.

WARNING! Kickback may occur when

the nose or tip of the guide bar touches

an object, and cause a lightning fast

reverse reaction, kicking the guide bar

up and towards the operator. May

cause serious personal injury.

CONTENTS

English 3 –

Contents

KEY TO SYMBOLS

Symbols on the machine: ..................................... 2

Symbols in the operator’s manual: ....................... 2

CONTENTS

Contents ............................................................... 3

INTRODUCTION

Dear Customer, .................................................... 4

WHAT IS WHAT?

What is what on the chain saw? ........................... 5

GENERAL SAFETY PRECAUTIONS

Before using a new chain saw .............................. 6

Important .............................................................. 6

Always use common sense .................................. 7

Personal protective equipment ............................. 7

Machine s safety equipment ................................. 7′

Cutting equipment ................................................ 11

ASSEMBLY

Fitting the bar and chain ....................................... 17

FUEL HANDLING

Fuel ...................................................................... 18

Fuelling ................................................................. 19

Fuel safety ............................................................ 19

STARTING AND STOPPING

Starting and stopping ........................................... 21

WORKING TECHNIQUES

Before use: ........................................................... 23

General working instructions ................................ 23

How to avoid kickback .......................................... 30

MAINTENANCE

Gener 31al .................................................................

Carburettor adjustment ......................................... 31

Checking, maintaining and servicing chain saw

safety equipment .................................................. 32

Mufﬂer .................................................................. 34

Starter .................................................................. 35

Air ﬁlter ................................................................. 36

Spark plug ............................................................ 36

Lubricating the bar tip sprocket ............................ 36

Needle bearing lubrication ................................... 37

Adjustment of the oil pump ................................... 37

Cooling system ..................................................... 37

”Air Injection” centrifugal cleaning ........................ 37

Winter use ............................................................ 38

Heated handles .................................................... 39

Maintenance schedule ......................................... 40

TECHNICAL DATA

Technical data ...................................................... 41

Bar and chain combinations ................................. 42

Saw chain ﬁling and ﬁle gauges ........................... 42

EC-declaration of conformity ................................ 43

Specyfikacje produktu

Marka:	Husqvarna
Kategoria:	Zaagmachine
Model:	576 XP
Kolor produktu:	Stal nierdzewna
Typ kontroli:	Buttons,Rotary
Łatwy do czyszczenia:	Tak
Napięcie wejściowe AC:	230 - 240 V
Wysokość produktu:	594 mm
Szerokość produktu:	594 mm
Głębokość produktu:	598 mm
Klasa wydajności energetycznej:	A
Liczba piekarników:	1
Pojemność netto piekarnika:	74 l
Grill:	Tak
Rodzaj timera:	Cyfrowy
Typ piekarnika:	Kuchenka elektryczna
Pojemność wnętrza wszystkich piekarników:	74 l
Łączna moc piekarnika:	- W
Zintegrowany zegar:	Tak
Rodzaj zegara:	Elektroniczny
Pozycja panelu sterowania:	Przednie
Moc piekarnika:	- W
wymiary przestrzeni instalacyjnej (SxGxW):	600 x 560 x 550 mm