Instrukcja obsługi Husqvarna 555RXTT


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Husqvarna 555RXTT (44 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/44
EEEEnnnngggglllliiiisssshhhh
555FX 555FXT 555RXT
555FRM
Operator’s manual
Please r
ead the operator’s manual carefully and make sure you understand the instructions
before using the machine.
KEY TO SYMBOLS
2 – English
Symbols
WARNING! Clearing saws,
brushcutters and trimmers can be
dangerous! Careless or incorrect
use can result in serious or fatal
injury to the operator or others. It is
extremely important that you read
and understand the contents of the
operator’s manual.
Please read the operator’s manual
carefully and make sure you
understand the instructions before
using the machine.
Always wear:
A protective helmet where there
is a risk of falling objects
Approved hearing protection
Approved eye protection
Max. speed of output shaft, rpm
Watch out for thrown objects and
ricochets.
The operator of the machine must
ensure, while working, that no
persons or animals come closer than
15 metres.
Machines fitted with saw blades or
grass blades can be thrown violently
to the side when the blade comes
into contact with a fixed object. This is
called blade thrust. The blade is
capable of amputating an arm or leg.
Always keep people and animals at least 15 metres from
the machine.
Always wear approved protective
gloves.
Wear sturdy, non-slip boots.
Only use non-metallic, flexible
cutting attachments, i.e. trimmer
heads with trimmer cord.
Other symbols/decals on the
machine refer to special
certification requirements for
certain markets.
Switch off the engine by moving the
stop switch to the STOP position
before carrying out any checks or
maintenance.
Always wear approved protective
gloves.
Regular cleaning is required.
Visual check.
Approved eye protection must always
be used.
50FT
15 m
50FT
15 m
CONTENTS
English 3
Contents
Note the f
ollowing before
starting:
Please read the operator’s manual carefully.
Maintenance, replacement, or repair of the emission
control devices and system may be performed by any
nonroad engine repair establishment or individual.
This label certify that the product has been certified in
accordance with American exhaust requirements EPA 1.
KEY TO SYMBOLS
Symbols ................................................................ 2
CONTENTS
Contents ............................................................... 3
Note the following before starting: ........................ 3
INTRODUCTION
Dear customer! ..................................................... 4
WHAT IS WHAT?
What is what on the brush cutter? ........................ 5
What is what on the brush cutter? ........................ 6
What is what on the brush cutter? ........................ 7
GENERAL SAFETY PRECAUTIONS
Important .............................................................. 8
Personal protective equipment ............................. 8
Machines safety equipment ................................. 9
Cutting equipment ................................................ 12
ASSEMBLY
Assembling the handlebar and throttle ................. 15
Transport position, handlebar ............................... 15
Assembling the cutting equipment ....................... 16
Fitting the blade guard/combination guard, grass
blade and ball-bearing-mounted support cup ....... 16
Fitting the blade guard and saw blade .................. 17
Fitting the shredder blade and the shredder blade
guard (555FRM) ................................................... 17
Fitting other guards and cutting attachments ....... 18
Adjusting the harness and brush cutter ................ 19
Balance XT ........................................................... 19
FUEL HANDLING
Fuel safety ............................................................ 21
Fuel ...................................................................... 21
Fueling .................................................................. 22
STARTING AND STOPPING
Check before starting ........................................... 23
Starting and stopping ........................................... 23
WORKING TECHNIQUES
General working instructions ................................ 25
MAINTENANCE
Carburetor ............................................................ 30
Muffler .................................................................. 31
Cooling system ..................................................... 31
Air filter ................................................................. 31
Bevel gear ............................................................ 32
Drive shaft ............................................................ 32
Spark plug ............................................................ 32
Winter use ............................................................ 32
Maintenance schedule ......................................... 34
TECHNICAL DATA
Technical data ....................................................... 35
FEDERAL EMISSION CONTROL WARRANTY
STATEMENT
YOUR WARRANTY RIGHTS AND OBLIGATIONS 38
!
WARNING! Long-term exposure to noise
can result in permanent hearing
impairment. So always use approved
hearing protection.
!
WARNING! Under no circumstances may
the design of the machine be modified
without the permission of the
manufacturer. Always use genuine
accessories. Non-authorized
modifications and/or accessories can
result in serious personal injury or the
death of the operator or others.
Your warranty may not cover damage or
liability caused by the use of non-
authorized accessories or replacement
parts.
!
WARNING! A clearing saw, brushcutter
or trimmer can be dangerous if used
incorrectly or carelessly, and can cause
serious or fatal injury to the operator or
others. It is extremely important that you
read and understand the contents of this
operator’s manual.
TWC
The engine exhaust from this product
contains chemicals known to the State
of California to cause cancer, birth
defects or other reproductive harm.


Specyfikacje produktu

Marka: Husqvarna
Kategoria: Niesklasyfikowane
Model: 555RXTT

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Husqvarna 555RXTT, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane Husqvarna

Husqvarna

Husqvarna B330X Instrukcja

9 Października 2024
Husqvarna

Husqvarna B220X Instrukcja

9 Października 2024
Husqvarna

Husqvarna ARFM5100v2 Instrukcja

8 Października 2024
Husqvarna

Husqvarna 318iS20 Instrukcja

7 Października 2024
Husqvarna

Husqvarna ARBR5131Xv1 Instrukcja

4 Października 2024
Husqvarna

Husqvarna 40-B220X Instrukcja

2 Października 2024
Husqvarna

Husqvarna WL 8i Instrukcja

1 Października 2024
Husqvarna

Husqvarna 555RXTT Instrukcja

29 Września 2024
Husqvarna

Husqvarna 301SM Instrukcja

25 Września 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024
Florabest

Florabest HG05806 Instrukcja

15 Października 2024