Instrukcja obsługi Husqvarna 525P4S


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Husqvarna 525P4S (136 stron) w kategorii Maszyna do piłowania. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/136
525P4S, 525P5S
EN Operator's manual 2-27
DE Bedienungsanweisung 28-55
FR Manuel d'utilisation 56-83
NL Gebruiksaanwijzing 84-111
SL Navodila za uporabo 112-137
Contents
Contents
Contents
ContentsContents
Introduction..................................................................... 2
Safety..............................................................................4
Assembly........................................................................ 9
Operation...................................................................... 11
Maintenance................................................................. 15
Troubleshooting............................................................ 23
Transportation, storage and disposal........................... 23
Technical data.............................................................. 24
Accessories.................................................................. 25
EC Declaration of Conformity....................................... 27
Introduction
Introduction
Introduction
IntroductionIntroduction
Intended use
Intended use
Intended use
Intended useIntended use
The product is used for cutting branches and twigs.
Note:
Note:
Note:
Note: Note: National regulations can set limit to the
operation of the product.
Only use the product with accessories that are approved
by the manufacturer. Refer to
Accessories on page 25
.
Product overview
Product overview
Product overview
Product overviewProduct overview
525P5S 525P5S
21 20
24
22 23
26
25
1
8
29
13
6
19
17
16
15
14
18
2
4
28
10
9
12
11
5
7
27
7
3
1. Chain lubrication adjustment screw
2. Shaft
3. Front handle
4. Throttle trigger
5. Stop switch
6. Throttle trigger lockout
7. Harness support hook
8. Cylinder cover
9. Starter handle
10. Fuel tank
11. Choke control
12. Air purge
13. Air filter cover
14. Protective guard for saw chain
15. Bar nut
16. Saw chain
17. Guide bar
18. Chain tensioning screw
2
2
2
22 703 - 007 - 28.04.2021
19. Chain oil tank
20. Operator's manual
21. Transport guard, bar
22. Hex key
23. Combination wrench
24. Combination wrench, chain tensioner
25. Harness 525P5S
26. Harness 525P4S
27. Shaft coupling
28. Impact guard
29. Spark plug cap and spark plug
Symbols on the product
Symbols on the product
Symbols on the product
Symbols on the productSymbols on the product
WARNING! This product is dangerous.
Injury or death can occur to the operator
or bystanders if the product is not used
carefully and correctly. To prevent injury
to the operator or bystanders, read and
obey all safety instructions in the
operator's manual.
Please read the operator's manual
carefully and make sure that you
understand the instructions before use.
Use a protective helmet in locations where
objects can fall on you. Use approved
hearing protection. Use approved eye
protection.
Use approved protective gloves.
Use heavy-duty slip-resistant boots.
Fuel.
Chain oil.
Adjustment of the oil flow.
Direction of rotation, saw
chain.
Primer bulb.
Choke.
The product agrees with the applicable
EC directives.
yyyywwxxxx
yyyywwxxxx
yyyywwxxxx
yyyywwxxxxyyyywwxxxx
The rating plate shows the serial
number. is the production
yyyy
yyyy
yyyy
yyyyyyyy
year, is the production week
ww
ww
ww
wwww
and is the sequential number.
xxxx
xxxx
xxxx
xxxxxxxx
This product is not electrically insulated. If the product touches or comes close to high-volt-
age power lines it could lead to death or serious injury. Electricity can jump from one point to
another by arcing. The higher the voltage, the greater the distance electricity can jump. Elec-
tricity can also travel through branches and other objects, especially if they are wet. Always
keep a distance of at least 10 m between the machine and high-voltage power lines and/or
any objects that are touching them. If you have to work within this safe distance you should
always contact the relevant power company to make sure the power is switched off before
you start work.
The operator of the product must ensure, while working, that no persons or animals come
closer than 15 meters.
Note:
Note:
Note:
Note: Note: Other symbols/decals on the product refer to
certification requirements for other commercial areas.
703 - 007 - 28.04.2021 3
3
3
33


Specyfikacje produktu

Marka: Husqvarna
Kategoria: Maszyna do piłowania
Model: 525P4S

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Husqvarna 525P4S, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Maszyna do piłowania Husqvarna

Instrukcje Maszyna do piłowania

Najnowsze instrukcje dla Maszyna do piłowania

Makita

Makita 5603 Instrukcja

15 Października 2024
MSW

MSW -TAS287 Instrukcja

15 Października 2024
MSW

MSW T-SAW300 Instrukcja

15 Października 2024
Black & Decker

Black & Decker KS650 Instrukcja

14 Października 2024
Black & Decker

Black & Decker GKC3630L20 Instrukcja

14 Października 2024
Ferm

Ferm FKS-165 Instrukcja

14 Października 2024
Royal Catering

Royal Catering RCBS-1650 Instrukcja

14 Października 2024
Makita

Makita DJV181Z Instrukcja

12 Października 2024
Hitachi

Hitachi C 7MFA(LA) Instrukcja

10 Października 2024