Instrukcja obsługi Husqvarna-Viking H-Class 100Q

Husqvarna-Viking maszyna do szycia H-Class 100Q

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Husqvarna-Viking H-Class 100Q (44 stron) w kategorii maszyna do szycia. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/44

USER’S GUIDE

When using an electrical appliance, basic safety precautions should always be followed, including

the following:

Read all instructions before using this household sewing machine.

• A sewing machine should never be left unattended when plugged in. Always unplug this

sewing machine from the electric outlet immediately after using and before cleaning.

• Always unplug before relamping. Replace bulb with same type rated 5 Watt.

• This sewing machine is not intended for use by persons (including children) with reduced

physical, sensory or mental capabilities, or lack of experience and knowledge, unless they

have been given supervision or instruction concerning use of the sewing machine by a

person responsible for their safety.

• Children should be supervised to ensure that they do not play with the sewing machine.

• Use this sewing machine only for its intended use as described in this manual. Use only

attachments recommended by the manufacturer as contained in this manual.

• Never operate this sewing machine if it has a damaged cord or plug, if it is not working

properly, if it has been dropped or damaged, or dropped into water. Return the sewing

machine to the nearest authorized dealer or service center for examination, repair, electrical

or mechanical adjustment.

• Never operate the sewing machine with any air openings blocked. Keep ventilation

openings of the sewing machine and foot controller free from the accumulation of lint,

dust, and loose cloth.

• Keep À ngers away from all moving parts. Special care is required around the sewing

machine needle.

• Always use the proper needle plate. The wrong plate can cause the needle to break.

• Do not use bent needles.

• Do not pull or push fabric while stitching. It may deÁ ect the needle causing it to break.

• Wear safety glasses.

• Switch the sewing machine off (“0”) when making any adjustment in the needle area,

such as threading needle, changing needle, threading bobbin, or changing presser foot, etc.

• Always unplug sewing machine from the electrical outlet when removing covers, lubricating,

or when making any other user servicing adjustments mentioned in the instruction manual.

• Never drop or insert any object into any opening.

• Do not use outdoors.

• Do not operate where aerosol (spray) products are being used or where oxygen is being

administrated.

• To disconnect, turn all controls to the off (“0”) position, then remove plug from outlet.

• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

• The sound pressure level under normal operating conditions is 75dB(A).

Machine overview ............................................ 3

Accessories ........................................................... 4

Presser feet ..........................................................4

Stitches ....................................................................5

Unpacking..............................................................7

Connect to the power supply ................... 7

Pack away after sewing.................................. 8

Polarized plug information ................. 8

Changing the presser foot ........................... 8

Changing the needle ....................................... 9

Presser foot lifter .............................................. 9

Presser Foot Up Saftey ................................. 9

Needles ............................................................... 10

Universal needle ...............................10

Stretch needle ....................................10

Embroidery needle ...........................10

Denim needle ....................................10

Wing needle .......................................10

Spool pins........................................................... 11

Horizontal Position ..........................11

Vertical Position ...............................11

Threading the upper thread .................... 12

Needle Threader ...............................14

Threading for Twin Needle ..................... 15

Cutting the Thread ....................................... 15

Wind the bobbin ........................................... 16

Place the Bobbin in the Machine ...18

Lower the feed teeth .................................. 19

Needle thread tension ...............................19

Raise the Bobbin thread ............................ 20

Adjust the presser foot pressure .......... 20

Speed Control Slide ................................... 21

Foot Control .................................................... 21

Machine Sound ............................................... 21

Function buttons ............................................ 22

START/STOP button ....................22

Reverse button ..................................22

FIX button ........................................22

Needle Stop Up/Down...................23

Stitch Length .....................................23

Stitch Width ......................................23

Pattern Selection buttons ................23

Warning Messages/Sound ........................ 24

Main Motor Overloaded .................24

Bobbin Winding Position ...............24

Specyfikacje produktu

Marka:	Husqvarna-Viking
Kategoria:	maszyna do szycia
Model:	H-Class 100Q

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Husqvarna-Viking H-Class 100Q, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje maszyna do szycia Husqvarna-Viking

Husqvarna-Viking H-Class 100Q Instrukcja

10 Stycznia 2025

Husqvarna-Viking Emerald 118 Instrukcja

25 Grudnia 2024

Husqvarna-Viking Opal 690Q Instrukcja

25 Grudnia 2024

Husqvarna-Viking Sapphire 930 Instrukcja

25 Grudnia 2024

Husqvarna-Viking 120 Instrukcja

8 Października 2024

Husqvarna-Viking Classica 90 Instrukcja

8 Października 2024

Husqvarna-Viking 105 Instrukcja

8 Października 2024

Husqvarna-Viking Designer Ruby 90 Instrukcja

8 Października 2024

Husqvarna-Viking Huskystar EM10 Instrukcja

8 Października 2024

Husqvarna-Viking Mega Quilter Instrukcja

8 Października 2024

Instrukcje maszyna do szycia

Najnowsze instrukcje dla maszyna do szycia

Pfaff 463H Instrukcja

15 Stycznia 2025

Elna Lotus ZZ Instrukcja

14 Stycznia 2025

Brother Aveneer EV1-LE Instrukcja

14 Stycznia 2025

Brother Aveneer EV1 Instrukcja

14 Stycznia 2025

Necchi Maximatic 586 Instrukcja

12 Stycznia 2025

Juki MS-1190 Instrukcja

12 Stycznia 2025

Pfaff 295-1 Instrukcja

12 Stycznia 2025

Brother Innov-is NV-180 Instrukcja

12 Stycznia 2025

Baby Lock Imagine 2 Instrukcja

12 Stycznia 2025

Alfa 1412 Instrukcja

11 Stycznia 2025