Instrukcja obsługi Hulk Power HP15P004SS

Hulk Power kompresor HP15P004SS

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Hulk Power HP15P004SS (32 stron) w kategorii kompresor. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/32
EMAX Compressor
1000 Cass Dr., Clayton, OH 45315 USA
866.294.4153
info@emaxcompressor.com
Fax: (937) 540-1157
Portable Air Compressor
Operating Instructions
EMAX designs and manufactures products for safe
operation. However, operators and maintenance per-
sons are responsible for maintaining safety. All safety
precautions are included to provide a guideline for
minimizing the possibility of accidents and property
damage while equipment is in operation.
Keep these instructions for reference.
Model # :
UPC:
HP15P004SS man v.171212
HP15P004SS
815002013954
2
HULK Power
Model Specifications
Model: HP15P004SS
Motor: 120V ~ 60Hz, 7A
Power: 1 HP
Max. pressure: 120 psi
No-load speed: 1700 rpm
Air delivery:
3.9 cfm @ 40 psi
2.7 cfm @ 90 psi
Tank size: 2 x 2 gal. (7.6 L)
Noise: 41 dB(A)
Weight: 49.9 lb. (22.6 kg)
Contents
Model Specifications 2 …………………………
Description 3 ………………………………………
Get to know your compressor 3 …………………
Safety Information 4 ……………………………
Basic Guidelines 4 ………………………………
Breathable Air 5 ………………………………………
Pressurized Components 5 ……………………
Personal Protective Equipment 5 ………………
Inspection 5 …………………………………………
Installation 5 ………………………………………
Area 5 ……………………………………………………
Electrical Safety 6 ……………………………………
Operation 6 …………………………………………
Safety Rules 6 ………………………………………
Air Tool Cautions 7 …………………………………
Power Source Connection 8 …………………
Power Requirements 8 ……………………………
Grounding Instructions 8 …………………………
Connect to power source 8 ……………………
Getting Started 8 …………………………………
Assembly 8 …………………………………………
Installing the air filter 8 …………………………
Operation 8 …………………………………………
Before operating your air compressor: 8
General Overview 9 ………………………………
Installation and Location 9 ……………………
Connecting to Power Source 9 …………………
Extension Cords 9 ……………………………………
Attaching an air hose 9…………………………
Drain Valve 9 ……………………………………………
Pressure Switch 10 ……………………………………
Adjusting the air pressure 10 ……………………
Shutting off your compressor 10 …………………
Cold Weather Starting 10 …………………………
Maintenance 10 ……………………………………
Daily 10 ……………………………………………………
Monthly 10 ………………………………………………
Storage 10 …………………………………………………
Troubleshooting 11 ………………………………
Parts List 12 …………………………………………
Schematic Drawing 13 ……………………………
Warranty Statement 14 …………………………
3HP15P004SS man v.171212
Air Compressor
Description
fig 1
1
23 3 3
5
6
8
9
10
11
Get to know your compressor
Please refer to  g 1 and 2.
1. TANK DRAIN VALVE
(located on bottom of tank) - The tank drain
valve can be opened to allow moisture and
compressed air to be released from the air tank.
The tank drain valve should
always be opened slowly to
avoid damage to equipment and possible injury.
2. TANK -
six gallon (22.7 liters) tank
3. RUBBER FOOT
Reduces compressor vibration and movment.
4. SAFETY VALVE -
The safety valve automatically relieves pressure
from the air tank in the event of excessive
pressure build up. Safety Valve is preset at
factory. Do not attempt to make any adjustments
to the safety valve. Periodically pull the ring on
the safety valve end to check that it is working
WA R N I N G
properly.
5. RESERVOIR AIR PRESSURE GAUGE -
Indicates pressure of compressed air built up in
the tank.
6. PRESSURE SWITCH -
Controlled by the red tipped power switch lever
which turns the air compressor on and o󰀨 . When
switch lever is pulled up, compressor is turned
o󰀨 . When lever is moved down to the "Auto"
position, the pressure switch is engaged and will
start the compressor pump automatically when
tank pressure is below the factory-set minimum.
The pressure switch continues to monitor the
pressure and turns the pump o󰀨 when the
pressure reaches the factory-set maximum.
Always make sure that the
compressor power switch is in the
OFF position before performing any maintenance
or plugging the compressor into a power supply.
N O T I C E


Specyfikacje produktu

Marka: Hulk Power
Kategoria: kompresor
Model: HP15P004SS

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Hulk Power HP15P004SS, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje kompresor Hulk Power

Instrukcje kompresor

Najnowsze instrukcje dla kompresor

MSW

MSW -SPS-24 Instrukcja

15 Października 2024
MSW

MSW -UVRSRI Instrukcja

15 Października 2024
Ferm

Ferm CRM1027 FCO-1524 Instrukcja

13 Października 2024
Einhell

Einhell BT-AC 180/6 Kit Instrukcja

9 Października 2024
Ozito

Ozito ACP-2115K Instrukcja

9 Października 2024
Anova

Anova CA30S Instrukcja

8 Października 2024
Anova

Anova CA50S Instrukcja

8 Października 2024
DeWalt

DeWalt DCC2520 Instrukcja

8 Października 2024
SPL

SPL Kultube Instrukcja

8 Października 2024