Instrukcja obsługi Hubbell J636R
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Hubbell J636R (40 stron) w kategorii Heater. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/40
1
OPERATING AND MAINTENANCE
MANUAL FOR
ELECTRIC BOOSTER HEATER
ELECTRIC HEATER COMPANY
BASE MODEL “ J ”
UM ANSI/NSF5
201 Edition7
2
HUBBELL
ELECTRIC HEATER COMPANY
45 SEYMOUR STREET
P.O. BOX 288
STRATFORD, CT 06615
PHONE: (203) 378-2659
FAX: (203) 378-3593
INTERNET: http://www.hubbellheaters.com
-- IMPORTANT --
Always reference the full model number and serial number when calling the factory.
WARNING / CAUTION
1. Tank is to be completely filled with water and all air is to be vented before energizing.
2. Due to the rigors of transportation, all connections should be checked for tightness before
heater is placed in operation.
3. Safety relief valve must be installed in tapping provided.
4. The refractory material used in heating elements may absorb some moisture during
transit, periods of storage, or when subjected to a humid environment. This moisture
absorption results in a cold insulation resistance of less than ( ) megohms. If thisone 1
heater has been subjected to the above condition, each heating element must be checked
for insulation resistance before energizing. Contact the factory for a replacement element.
5. KEEP AWAY FROM LIVE ELECTRICAL CIRCUITS.
Do not perform any maintenance, make any adjustments, or replace any components
inside the control panel with the high voltage power supply turned on. Under certain
circumstances, dangerous potentials may exist even when the power supply is off. To
avoid casualties, always turn the power supply safety switch to off, turn the charge or
ground the circuit before performing any maintenance or adjustment procedure.
6. The unit is designed to operate at pressure not more than 150 psi.
7. Generalized instructions and procedures cannot anticipate all situations. For this reason,
only qualified installers should perform the installations. A qualified installer is a person
who has licensed training and a working knowledge of the applicable codes, tools,
equipment, and methods necessary for safe installation of an electric resistance water
heater. If questions regarding installation arise, check your local plumbing and electrical
inspectors for proper procedures and codes. If you cannot obtain the required
information, contact the company.
8. Water Quality Requirements – Recommended water hardness is 4 to 6 grains of
hardness per gallon (GPG). Water hardness above 6 GPG should be treated by a water
conditioner (water softener or in-line treatment). Water hardness below 4 GPG also
requires treatment to reduce potential corrosion. Excessive GPG will result in higher
operating and maintenance costs and will reduce product longevity. Chlorides must
not exceed 50 parts per million (ppm). Excessive chlorides will result in metallic
corrosion and will reduce product longevity. Water treatment has been shown to
reduce costs associated with de-liming the booster as well as reducing metallic
corrosion. Product failure caused by these conditions is not covered under warranty.
See warranty for complete details.
9. This water heater is not intended for space heating applications.
10. The water heater is factory set at 185°F for booster water heating applications. This
results in the possibility of a scalding water injury. A full thickness skin burn can
occur in less than one second of exposure to water at this temperature.
3
TABLE OF CONTENTS
SECTION TITLE PAGE No.
I GENERAL DESCRIPTION AND CONSTRUCTION 4
II INSTALLATION AND START-UP 9
III SCHEDULED MAINTENANCE AND OPERATION 24
IV TROUBLESHOOTING 26
V SERVICING AND REPLACEMENT OF PARTS 32
VI SERVICE PARTS LIST 35
VII TORQUE VALUES 37
VIII WARRANTY INFORMATION 38
Specyfikacje produktu
Marka: | Hubbell |
Kategoria: | Heater |
Model: | J636R |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Hubbell J636R, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Heater Hubbell
21 Września 2024
19 Września 2024
19 Września 2024
19 Września 2024
19 Września 2024
18 Września 2024
18 Września 2024
Instrukcje Heater
- Heater DeLonghi
- Heater AEG
- Heater Xiaomi
- Heater Tefal
- Heater Livoo
- Heater SilverCrest
- Heater Bosch
- Heater Candy
- Heater Nobo
- Heater Midea
- Heater Infiniton
- Heater Nedis
- Heater Stanley
- Heater Black & Decker
- Heater Adler
- Heater Rinnai
- Heater Hendi
- Heater Domo
- Heater Ardes
- Heater Taurus
- Heater Orbegozo
- Heater Stadler Form
- Heater Einhell
- Heater Jocel
- Heater Hyundai
- Heater Bimar
- Heater Rowenta
- Heater Mesko
- Heater Honeywell
- Heater ECG
- Heater Unold
- Heater Truma
- Heater Dyson
- Heater Zelmer
- Heater Wilfa
- Heater Eureka
- Heater Bomann
- Heater DEDRA
- Heater Emerio
- Heater MPM
- Heater Emos
- Heater Corbero
- Heater Ravanson
- Heater Perel
- Heater Fagor
- Heater GoldAir
- Heater Trotec
- Heater Thomson
- Heater Trumatic
- Heater Izzy
- Heater Klarstein
- Heater Güde
- Heater Cecotec
- Heater JANDY
- Heater Camry
- Heater Steba
- Heater Lenoxx
- Heater Qlima
- Heater Scarlett
- Heater Nevir
- Heater TriStar
- Heater Dimplex
- Heater Harvia
- Heater Baxi
- Heater Lavorwash
- Heater Brandson
- Heater Vornado
- Heater G3 Ferrari
- Heater Westfalia
- Heater Hayward
- Heater Remko
- Heater Clatronic
- Heater SVAN
- Heater Ariete
- Heater Princess
- Heater Carson
- Heater Innoliving
- Heater Argoclima
- Heater Olympia
- Heater Heller
- Heater Mora
- Heater Kenmore
- Heater VOX
- Heater Pelgrim
- Heater Solis
- Heater Orion
- Heater Blumfeldt
- Heater Vonroc
- Heater Powerfix
- Heater Kalorik
- Heater Suntec
- Heater Kunft
- Heater Grunkel
- Heater Zibro
- Heater Becken
- Heater Masport
- Heater Guzzanti
- Heater Sygonix
- Heater Cotech
- Heater Eurom
- Heater PRIME3
- Heater Sogo
- Heater Lasko
- Heater Swan
- Heater Alpina
- Heater Argo
- Heater Sinbo
- Heater EWT
- Heater Mellerware
- Heater Nestor Martin
- Heater Stiebel Eltron
- Heater Real Flame
- Heater Evolar
- Heater Zibro Kamin
- Heater Air King
- Heater Royal Sovereign
- Heater King
- Heater Maxwell
- Heater Piazzetta
- Heater Heylo
- Heater Kent
- Heater CasaFan
- Heater Olimpia Splendid
- Heater Wamsler
- Heater Duux
- Heater Imetec
- Heater Topcraft
- Heater Blaze
- Heater Primo
- Heater Dovre
- Heater Creda
- Heater Konig
- Heater Plieger
- Heater Zehnder
- Heater Fantini Cosmi
- Heater CaterChef
- Heater Dantherm
- Heater Brixton
- Heater Superior
- Heater La Nordica
- Heater Jotul
- Heater HQ
- Heater Vasco
- Heater Nectre
- Heater PAX
- Heater Jaga
- Heater Extraflame
- Heater Just Fire
- Heater Hartig And Helling
- Heater Heatstrip
- Heater Escea
- Heater Kogan
- Heater Braemar
- Heater Bromic Heating
- Heater Jindara
- Heater Hatco
- Heater SunRed
- Heater XPower
- Heater WestBend
- Heater Prem-i-air
- Heater Quadra-Fire
- Heater VIESTA
- Heater Brivis
- Heater Pacific Energy
- Heater Dri Eaz
- Heater Regency
- Heater Burley
- Heater Invroheat
- Heater Noirot
- Heater Gossmann
Najnowsze instrukcje dla Heater
21 Września 2024
21 Września 2024
21 Września 2024
21 Września 2024
21 Września 2024
21 Września 2024
21 Września 2024
21 Września 2024
21 Września 2024
21 Września 2024