Instrukcja obsługi HOZO Design NeoRuler

HOZO Design Sprzęt pomiarowy NeoRuler

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla HOZO Design NeoRuler (2 stron) w kategorii Sprzęt pomiarowy. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/2
×1 Back to zero / ×2 Main Menu
Bluetooth Send / Select Scale / Select Unit
Switch (length / scales / unit)
Back to measure Switch Scales
QUICKSTART GUIDE
Model : N01 | Ver:1.3
2 sec > ON/OFF
Select
Switch Function
5 min > Sleep, 2 hr > OFF
1.5-2 hrs > 100%
NeoPointer
Back / ON-OFF
Select Button
Switch Button
7 86
32 4
5
11
2
3
4
LED Marks
Screen
USB-C Charging Port
Charging Light
5
6
7
8
NeoRuler has 93 built-in scales
distributed in 8 scale modes. Select
the default scale mode before use,
and switch it in the setting menu.
The spacing between the LED Mark
(1) changes when changing the scale. The
distance indicator (2) represents the actual
scaled length between two marks.
Scale Setting
When the calibration notification
shows up, move the NeoPointer to
the left for calibration. When
finished, click any button to return.
Basic Start to use Calibration Main menu Scale Ruler
50cm
2
1
Arch ENG I ENG II MAP
1/2 1/125 1/10 0 0
1/10 0 k
1/3 1/150 1/1250
1/125k
1/4 1/20 0 1/150 0
1/20 0 k
1/5 1/250 1/16 25
1/250 k
1/10 1/30 0 1/20 0 0
1/50 0 k
1/20 1/4 0 0 1/250 0
1/10 0 0k
1/25 1/50 0 1/50 0 0
1/20 0 0 k
1/30 1/60 0 0
1/250 0 k
1/4 0 1/10 k
1/50 1/12.5k
1/72 1/20 k
1/75 1/25k
1/10 0 1/50 k
41 Built-in Metric Scales
1/1
Arch ENG I ENG II MAP
6" = 1' 1" = 10 ' 1" = 30 0 ' 1" = 1 Mi
4 " = 1' 1" = 20 ' 1" = 333' 1" = 1.5 Mi
3" = 1' 1" = 30 ' 1" = 4 16.6' 1" = 2 Mi
2" = 1' 1" = 4 0 ' 1" = 50 0 ' 1" = 3 Mi
1 1/2" = 1' 1" = 50 ' 1" = 583.3' 1" = 4 M i
1" = 1' 1"= 60 ' 1"= 60 0 ' 1" = 5 Mi
3/4 " = 1' 1" = 70 ' 1"= 6 25' 1" = 6 M i
1/2" = 1' 1" = 80 ' 1"= 666' 1" = 10 Mi
3/8" = 1' 1" = 83.3' 1"= 750 ' 1" = 20 Mi
1/4 " = 1' 1" = 90 ' 1" = 10 0 0 ' 1" = 24 M i
3/16" = 1' 1" = 10 0 ' 1" = 120 0 ' 1" = 25 Mi
1/8" = 1' 1" = 166.6' 1" = 20 0 0 '
3/32" = 1' 1" = 200 ' 1" = 30 0 0 '
1/16" = 1' 1" = 250 '
52 Built-in US Standard Scales
1' = 1'
Divider AccessoriesSetting
×1 Zero / ×2 Main Menu
Bluetooth Send / Reset Scale / Select Unit
Switch (length / scales / unit)
graphic length
Back to measure Switch Section
The principle of customized scale is to measure
a section of graphic length corresponding to its
actual distance
Step 1 | Measure Graphic Length
1 2
Unit of Graphic Length Graphic Length
Total Length Change # of division
Mode Battery
(Normal/Caliper) Normal/ Performance
Scale Info
(8 Scale Modes)
Section Length Switch Section
Divider allows the user to divide a certain
distance (slider's distance) into 2-12 sections.
1
2
3
# of division Main Menu
Use the pointer or press the button to increase ●
the value of the actual length. Press the button ■
to switch between different digits and units.
Step 2 | Input Actual Distance
3
4
Actual Distance Calculated Scale
Switch digits/Sections Add value
2 3
1
APP
Penholder
(1.2mm)
Download MEAZOR APP to enhance your experience with NeoRuler, Include
Data transfer, List mode, Drawing, and much more! Free for lifetime use and
Available to download in Apple APP Store and Google Play Store.
NeoRuler’s slider uses a modular snap design that allows you to
easily replace the slider pointer or other functional accessories. For
more information, please visit the HOZO DESIGN official website.”
*The accessories shown on this page are not included and need to be purchased separately.
Place the NeoRuler flat on the desktop when
replacing the module, and gently push the pointer
forward. Then put the new accessory into the slot.
MEAZOR APP 2.0
Customized Scale
34
2
1
* In performance mode, NeoRuler does
not go into standby or power off
Warrenty
Warranty period
HOZO Design. CO. - One-year Limited Consumer
Warranty covers your product against manufacturing
defects for one year from the date you bought your
product.
Special cases
The following cases are not covered by the warranty policy during the
warranty period and will be repaired at extra cost.
1) Damage caused by improper use, maintenance, or storage by the
user.
2) Dismantling of parts under unauthorized circumstances.
3) No proof of purchase.
4) The serial number does not correspond to the product sent for
repair or has been altered
5) Damage to the body caused by force majeure
6) Normal wear and tear of the parts, which need to be replaced
7) Damage caused by abnormalities in the temperature/humidity of
use or storage
8) Damage to the battery caused by not charging in accordance with
the instructions
9) Any damage caused by not following the instructions.
How to send it for repair?
If the product needs to be repaired, please contact the
distributor and send the product accordingly, and
provide a valid with proof of purchase.device number
contact us: support@hozodesign.com
Batch#: 2311-1#
Free for Lifetime
Caliper Kit
Penholder
(0.8mm)
Magnifier
Pointer
12

Specyfikacje produktu

Marka: HOZO Design
Kategoria: Sprzęt pomiarowy
Model: NeoRuler

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z HOZO Design NeoRuler, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Sprzęt pomiarowy HOZO Design

HOZO Design

HOZO Design NeoRuler Instrukcja

2 Października 2024

Instrukcje Sprzęt pomiarowy

Najnowsze instrukcje dla Sprzęt pomiarowy

Stamos

Stamos S-LS-28 Instrukcja

15 Października 2024
Stamos

Stamos S-LS-86 Instrukcja

15 Października 2024
Stamos

Stamos S-LS-61 Instrukcja

15 Października 2024
Stamos

Stamos S-LS-81 Instrukcja

15 Października 2024
Stamos

Stamos S-LS-84 Instrukcja

15 Października 2024
Stamos

Stamos S-LS-74 Instrukcja

15 Października 2024
Stamos

Stamos S-LS-76 Instrukcja

15 Października 2024
Stamos

Stamos S-LS-42 Instrukcja

15 Października 2024
Stamos

Stamos S-LS-75 Instrukcja

15 Października 2024
Stamos

Stamos S-LS-35 Instrukcja

15 Października 2024