Instrukcja obsługi Hotpoint OS 89 IX

Hotpoint Oven OS 89 IX

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Hotpoint OS 89 IX (16 stron) w kategorii Oven. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/16
OS 89 /HP
OS 89 IX/HP
OS 89 C /HP
OS 89 C IX/HP
Contents
Installation, 2-3
Positioning
Electrical connection
Technical data
Description of the appliance, 4
Overall view
Control panel
Display
Start-up and use, 5-9
Oven structure
Setting the clock
Setting the timer
Starting the oven
Programming cooking
Practical cooking advice
Cooking advice table
Precautions and tips, 10
General safety
Disposal
Respecting and conserving the environment
Care and maintenance, 11
Switching the appliance off
Cleaning the appliance
Cleaning the oven door
Replacing the light bulb
Assembling the sliding rack kit
Guarantee, 15
After Sales Service, 16
Operating Instructions
OVEN
GB
English,1
GB
2
GB
Ventilation
To ensure adequate ventilation is provided, the back
panel of the cabinet must be removed. It is
advisable to install the oven so that it rests on two
strips of wood, or on a completely flat surface with
an opening of at least 45 x 560 mm (see diagrams).
Centring xand fi ing
Position the 4 tabs on the side of the oven so that
they are aligned with the 4 holes on the outer frame.
Adjust the tabs in accordance with the thickness of
the cabinet side panel, as shown below:
20 mm thick: take off the
removable part of the tab (see
diagram).
18 mm thick: use the first
groove, which has already
been set in the factory (see
diagram).
16 mm thick: use the second
groove (see diagram).
Secure the appliance to the cabinet by opening the
oven door and inserting 4 screws into the 4 holes on
the outer frame.
All parts which ensure the safe operation of the
appliance must not be removable without the aid of
a tool.
Before operating your new appliance please read
this instruction booklet carefully. It contains
important information concerning the safe operation,
installation and maintenance of the appliance.
Please keep these operating instructions for future
reference. Pass them on to any new owners of the
appliance.
Positioning
Keep all packaging material out of reach of
children. It may present a choking or suffocation
hazard (see Precautions and tips).
The appliance must be installed by a qualified
professional in accordance with the instructions
provided. Incorrect installation may cause harm to
people and animals or may damage property.
Built-in appliance
Use a suitable cabinet to ensure that the appliance
functions properly.
The panels adjacent to the oven must be made of
heat-resistant material.
Cabinets with a veneer exterior must be
assembled with glues which can withstand
temperatures of up to 100°C.
To install the oven under the counter (see
diagram) or in a kitchen unit, the cabinet must
have the following dimensions:
The appliance must not come into contact with
electrical parts once it has been installed.
The indications for consumption given on the data
plate have been calculated for this type of
installation.
595 mm.
595 mm.
24 mm.
545 mm.
5 mm.
576 mm.
23 mm.
593 mm.
45 mm.
558 mm.
547
mm. min.
Installation
560 mm.
45 mm.
3
GB
Electrical connection
Ovens equipped with a three-pole power supply
cable are designed to operate with alternating
current at the voltage and frequency indicated on
the data plate located on the appliance (see below).
F w bittingthe poer s lupp y ca le
1. Open the terminal board by inserting a
screwdriver into the side tabs of the cover. Use the
screwdriver as a lever
by pushing it down to
open the cover (see
diagram).
2. Install the power
supply cable by
loosening the cable
clamp screw and the
three wire contact
screws L-N- .
Connect the wires to
the corresponding
terminals: the Blue wire
to the terminal marked
(N), the Brown wire to
the terminal marked (L)
and the Yellow/Green
wire to the terminal
marked (see
diagram).
3. Secure the cable by
fastening the clamp
screw.
4. Close the cover of the terminal board.
C g e r c c eonn tinec the lect i ity suppl y a lb to the
mains
Install a standardised plug corresponding to the
load indicated on the data plate (see table).
The appliance must be directly connected to the
mains using an omnipolar switch with a minimum
contact opening of 3 mm installed between the
appliance and the mains. The switch must be
suitable for the charge indicated and must comply
with current electrical regulations (the earthing wire
must not be interrupted by the switch). The supply
cable must be positioned so that it does not come
into contact with temperatures higher than 50°C at
any point.
The installer must ensure that the correct electrical
connection has been made and that it is fully
compliant with safety regulations.
Before connecting the appliance to the power
supply, make sure that:
The appliance is earthed and the plug is compliant
with the law.
The socket can withstand the maximum power of
the appliance, which is indicated on the data
plate (see below).
The voltage is in the range between the values
indicated on the data plate (see below).
The socket is compatible with the plug of the
appliance. If the socket is incompatible with the
plug, ask an authorised technician to replace it.
Do not use extension cords or multiple sockets.
Once the appliance has been installed, the power
supply cable and the electrical socket must be
easily accessible.
The cable must not be bent or compressed.
The cable must be checked regularly and replaced
by authorised technicians only (see Assistance).
The manufacturer declines any liability should
these safety measures not be observed.
N
L
APPLIANCE SPECIFICATIONS
Dimensions
width 43.4 cm
height 39.5 cm
depth 40.8 cm
Volume 70 l
Electrical
connections
voltage: 230 - 240 V~ 50Hz
maximum power absorbed
2600-2800W (see data plate)
ENERGY
LABEL
Directive 2002/40/EC on the
label of electric ovens.
Standard EN 50304
Declared energy consumption
for Forced convection Class –
heating mode:
Gratin.
This appliance conforms to the
following European Economic
Community directives:
2006/95/EEC dated 12/12/06
(Low Voltage) and subsequent
amendments –
2004/108/EEC dated 15/12/04
(Electromagnetic Compatibility)
and subsequent amendments -
93/68/EEC dated 22/07/93 and
subsequent amendments.
2002/96/EEC and subsequent
amendments.
1275/2008 stand-by/off mode.

Specyfikacje produktu

Marka: Hotpoint
Kategoria: Oven
Model: OS 89 IX

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Hotpoint OS 89 IX, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Oven Hotpoint

Hotpoint

Hotpoint OS 89 IX Instrukcja

14 Października 2024
Hotpoint

Hotpoint SA2540HIX Instrukcja

5 Października 2024
Hotpoint

Hotpoint SI4854HIX Instrukcja

5 Października 2024
Hotpoint

Hotpoint SI5 851 C IX Instrukcja

4 Października 2024
Hotpoint

Hotpoint CP98SP6 NL HA Instrukcja

17 Września 2024
Hotpoint

Hotpoint MH 99.1 (BK) /HA Instrukcja

5 Września 2024
Hotpoint

Hotpoint MS 998 IX H Instrukcja

3 Września 2024
Hotpoint

Hotpoint DD2 540 WH Instrukcja

2 Września 2024
Hotpoint

Hotpoint Luce FK 89EL .20 X/HA Instrukcja

28 Sierpnia 2024
Hotpoint

Hotpoint FH 21 IX/HA Instrukcja

28 Sierpnia 2024

Instrukcje Oven

Najnowsze instrukcje dla Oven

Domo

Domo DO806GO Instrukcja

14 Października 2024
G3 Ferrari

G3 Ferrari ROSTÓ 45 G10153 Instrukcja

14 Października 2024
Beko

Beko BXIF 243 Instrukcja

14 Października 2024
Westinghouse

Westinghouse PPL776S Instrukcja

14 Października 2024
Zanussi

Zanussi ZDA45W Instrukcja

14 Października 2024
Whirlpool

Whirlpool AKZM 8421 H Instrukcja

14 Października 2024
Whirlpool

Whirlpool W6 OM4 4S1 P BSS Instrukcja

14 Października 2024
Royal Catering

Royal Catering RCCO-2.0 Instrukcja

14 Października 2024
Royal Catering

Royal Catering RCAF-12L Instrukcja

14 Października 2024
Jocel

Jocel JFE019165 Instrukcja

14 Października 2024