Instrukcja obsługi Hotpoint FIT 834 AN HA

Hotpoint piekarnik FIT 834 AN HA

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Hotpoint FIT 834 AN HA (16 stron) w kategorii piekarnik. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/16
EN
1
PRODUCT DESCRIPTION
CONTROL PANEL
1. Control panel
2. Fan
3. Circular heating element
(not visible)
4. Shelf guides
(the level is indicated on the front
of the oven)
5. Door
6. Upper heating element/grill
7. Lamp
8. Identification plate
(do not remove)
9. Lower heating element
(not visible)
1. SELECTION KNOB
For switching the oven on by
selecting a function. Turn to the
position to switch the oven off.
2. TIMER KNOB
For setting the desired cooking
time.
3. THERMOSTAT KNOB
Turn to select the desired
temperature.
4. LED THERMOSTAT /
PREHEATING
Switches on during the heating
process. Switches off once the
desired temperature is reached.
DAILY REFERENCE
GUIDE
Before using the appliance carefully read the Health and Safety guide.
THANK YOU FOR PURCHASING AN
HOTPOINT-ARISTON PRODUCT
To receive more comprehensive help and
support, please register your product at
www. hotpoint. eu/ register
You can download the Safety Instructions
and the Use and Care Guide by visiting our
website docs . hotpoint . eu and following
the instructions on the back of this booklet.
5
4
3
2
1
5
4
3
2
1
1
2
3
4
5
8
9
7
6
1 2 3 4
2
ACCESSORIES
WIRE SHELF DRIP TRAY* BAKING TRAY* SLIDING RUNNERS*
Use to cook food or as a
support for pans, cake tins
and other ovenproof items
of cookware
Use as an oven tray
for cooking meat, sh,
vegetables, focaccia, etc.
or position underneath the
wire shelf to collect cooking
juices.
Use for cooking all bread
and pastry products, but
also for roasts, sh en
papillotte, etc.
To facilitate inserting or
removing accessories.
* Availble only on certain models.
The number and the type of accessories may vary depending on which model is purchased.
Other accessories can be purchased separately from the After-sales Service.
INSERTING THE WIRE SHELF AND OTHER
ACCESSORIES
Insert the wire shelf horizontally by sliding it across
the shelf guides, making sure that the side with the
raised edge is facing upwards.
Other accessories, such as the drip tray and the
baking tray, are inserted horizontally in the same way
as the wire shelf.
REMOVING AND REFITTING THE SHELF GUIDES
To remove the shelf guides, lift the guides up and
then gently pull the lower part out of its seating: the
shelf guides can now be removed.
To refit the shelf guides, first fit them back into their
upper seating. Keeping them held up, slide them
into the cooking compartment, then lower them into
position in the lower seating.
FITTING THE SLIDING RUNNERS (IF PRESENT)
Remove the shelf guides from the oven and remove
the protective plastic from the sliding runners.
Fasten the upper clip of the runner to the shelf guide
and slide it along as far as it will go. Lower the other
clip into position. To secure the guide, press the lower
portion of the clip firmly against the shelf guide. Make
sure that the runners can move freely. Repeat these
steps on the other shelf guide on the same level.
Please note: The sliding runners can be tted on any level.
EN
3
.HEAT THE OVEN
A new oven may release odours that have been left
behind during manufacturing: this is completely
normal.
Before starting to cook food, we therefore
recommend heating the oven with it empty in order
to remove any possible odours.
Remove any protective cardboard or transparent lm
from the oven and remove any accessories from inside it.
Heat the oven to 250° C for about one hour,
preferably using the Convection bakefunction.
The oven must be empty during this time. Follow the
instructions for setting the function correctly.
Please note: It is advisable to air the room after using the
appliance for the rst time.
USING THE APPLIANCE FOR THE FIRST TIME
1. SELECT A FUNCTION
To select a function, turn the selection knob to the
symbol for the function you require.
OFF
For switching off the oven.
LIGHT
To switch the oven light on.
CONVENTIONAL
For cooking any kind of dish on one shelf only.
DIAMOND CLEAN (Only in some models)
The action of the steam released during this
special low-temperature cleaning cycle allows dirt
and food residues to be removed with ease. This
function should be activated only when the oven is
cold and after having poured 200 ml of water into the
bottom of the oven. Set the timer for 30 minutes and
the temperature at 90°C. Once the cycle is finished,
wait about 15 minutes before opening the door.
CONVECTION BAKE
For cooking meat or baking cakes with liquid
centre on a single shelf. This function delivers an
even, golden, crisp top and base.
GRILL
For grilling steaks, kebabs and sausages, cooking
vegetables au gratin or toasting bread. When grilling
meat, we recommend using a drip tray to collect the
cooking juices: position the tray on any of the levels
below the wire shelf and add 500 ml of drinking water.
TURBO GRILL
For roasting large joints of meat (legs, roast
beef, chicken). We recommend using a drip tray to
collect the cooking juices: position the pan on any
of the levels below the wire shelf and add 500 ml of
drinking water. The roasting spit (if provided) can be
used with this function.
DEFROSTING
For defrosting food more quickly.
FORCED AIR
For cooking different foods that require the
same cooking temperature on several shelves
(maximum three) at the same time. This function can
be used to cook different foods without odours being
transferred from one food to another.
LOWER HEATING
Useful for browning the base of the dish. This
function is recommended also for slow-cooking, for
finishing the cooking of juicy dishes, and making
sauce concentrates.
2. ACTIVATE A FUNCTION
To start the function you have selected, turn the
thermostat knob to set the temperature you require.
By using the , it is possible to set the timer knob
cooking time between 1 and 120 minutes. Turn the
timer knob clockwise as far as it will go, then select
the desired cooking time by turning the timer knob
counter-clockwise.
When the desired cooking time has finished, the oven
will switch off automatically and the timer knob will
remain on .
To use the oven manually, make sure that the knob is
positioned on .
Please note: if the is on , you will not be able to timer knob
activate any of the functions.
To interrupt the function at any time, switch off the
oven, turn the and the selection knob thermostat knob
to and .
DIAMOND CLEAN (If present)
To activate the Diamond Clean” cleaning function,
pour 200 ml of drinking water into the bottom of the
oven, then turn the and the selection knob thermostat
knob to the icon.
3. PREHEATING
Once the function has been activated, the LED
thermostat will switch on signalling that the
preheating process has begun.
At the end of this process, the LED thermostat
switches off indicating that the oven has reached the
set temperature: at this point, place the food inside
and proceed with cooking.
Please note: placing the food in the oven before preheating
has nished may have an adverse eect on the nal cooking
result.
FUNCTIONS AND DAILY USE


Specyfikacje produktu

Marka: Hotpoint
Kategoria: piekarnik
Model: FIT 834 AN HA

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Hotpoint FIT 834 AN HA, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje piekarnik Hotpoint

Instrukcje piekarnik

Najnowsze instrukcje dla piekarnik