Instrukcja obsługi Hotpoint BCB 4010 E O31

Hotpoint lodówka BCB 4010 E O31

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Hotpoint BCB 4010 E O31 (40 stron) w kategorii lodówka. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/40

Quick guide

THANK YOU FOR BUYING AN HOTPOINT-ARISTON

PRODUCT

In order to receive a more complete assistance, please

Before using the appliance carefully read the Safety

Instruction.

PRODUCT DESCRIPTION

FIRST TIME USE

Wait at least two hours, after the installation, before connecting

the appliance to the power supply. Connect the appliance to the

power supply it starts the operation automatically. The ideal storage

temperatures for the food are preset in the factory.

After turning the appliance on, you must wait for 4-6 hours for the

correct storage temperature to be reached for a normally lled

appliance. Position the antibacterial anti-odour lter in the fan as

demonstrated in the lter packaging (if available). If the audible signal

sounds, it means that the temperature alarm has intervened: press the

button to switch o the acoustic alarms.

CONTROL PANEL

3.5.7. 6.

1. 1. Freezer and refrigerator compartment

temperature indicator

2. Fast cool - "Active Oxygen" button

3. On/stand-by

4. Alarm indicator

5. Turning o the sound alarm

6. Black out alarm indicator

7. Temperature button

"ACTIVE OXYGEN" FUNCTION

Through the emission of a small quantity of ozone, this function

enables a reduction in the proliferation of bacteria and microorganisms

inside the refrigertor and limits bad odours. When the function is

activated, a coloured light will appear on the device, according to the

following cyclical features:

• Green light: ozone emission phase

• Blue light: antibacterial and anti-odour action phase (without

ozone emission)

To deactivate the function, simply press the O3 button on the control

panel.

Note: when the Active Oxygen function is activated, a faint odour might

be perceived inside the refrigertor (the same odour that sometimes

accompanies a thunder storm due to the zone produced by the lightning):

it is absolutely normal.

Note: Disabling the function optimizes energy consumption. Keep the

bottle rack grid in the upper parts of the comparison to optimize the

fuction.

FAN*

The Fan improves temperature distribution inside the product,

allowing better preservation of stored food and reduction of excess

humidity. By default, the fan is switched on. You can turn the fan on/

o by pressing for 3 seconds and buttons. The temperature

indicator will ash and a sound signal is activated one times if the

fan is OFF or the temperature indicator will ash and a sound signal

is activated two times if the fan is ON. If the ambient temperature

exceeds 27°C, or if drops of water are present on the glass shelves,

it is essential that the fan is on to ensure the proper preservation of

the food. Deactivation of the fan allows energy consumption to be

optimised.

Note: the fan restarts automatically after a power cut or after turning o

the appliance. Do not obstruct the air intake area with food items.

ON/STANDBY

Press the button for 3 seconds to turn the appliance o. Press

the button again briey to reactivate the appliance.

Note: this does not disconnect the appliance from the power supply.

FREEZER AND REFRIGERATOR

COMPARTMENT TEMPERATURE

It is possible to set a dierent temperature of the appliance by pressing

the "Temp." button.

LEDs lit Set temperature

High Low

Low (colder)

Medium-low

Medium

Medium-high

High (less cold)

FAST COOL

Press the button for 3 seconds before placing a large quantity of

fresh food in the refrigerator compartment. When the function is

turned on the icon light up. The function turns o automatically after

36 hours, or manually by pressing the button again for 3 seconds.

TURNING OFF THE SOUND ALARM

To turn o the sound alarm, briey press the button.

* Available only on certain models

HOW TO STORE FOOD AND BEVERAGE

Legend

TEMPERATE ZONE

Suggested for storage of tropical fruit, cans, drink, eggs,

sauces, pickles, butter, jam

COOL ZONE

Suggested for storage of cheese, milk, daily food,

delicatessen, yoghurt

COOLEST AREA

Suggested for storage of cold cuts, desserts, meat and

sh

FRUIT & VEGETABLE DRAWER

FREEZER DRAWERS

FREEZING ZONE DRAWER

(Max cool zone)

Suggested to freeze fresh/cooked food

HYGIENE GRID*

The Fruit & vegetable drawer is equipped with the Hygiene grid.

Thanks to the special design of this component fruits&vegetable are

not in contact with the natural leakages (as drip loss and moisture

from vegetables) that drop below the Hygiene grid. The Hygiene grid

is treated with Microban SilverShield® technology that reduces the

harmful bacteria by up to 99.9% on the surface of the crisper grid, for

enhanced preservation of fruit and vegetables**.

The hygiene grid can be removed to be washed when dirty, simply

raising it and pulling it out. It can be simply washed by hand, with

water only or with common neutral detergents for dishes. It can be

washed also in the dishwasher. After cleaning, dry before putting it

back into place.

** Independently tested by IMSL (Industrial Microbiological Services Ltd,

UK) using ISO 22196

TROUBLESHOOTING

What to do if... Possible reasons Solutions

The control panel is

switched o, the appliance

does not work.

There may be an appliance power

supply problem.

Check that:

• there is not a power outage;

• the plug is properly inserted in the power socket and the mains

double-pole switch (if present) is in the correct position (i.e. allows

the appliance to be powered);

• the household electrical system protection devices are ecient;

• the power cable is not damaged.

The inside light does not

work.

The light may need to be replaced. • Contact the authorised Technical Assistance Service.

The appliance may be in On / Stand-by

mode. • Turn the appliance on by briey pressing the button (see On/

Stand-by function).

The temperature inside the

compartments is not low

enough.

There could be various causes (see

“Solutions”).

Check that:

• the doors close properly;

• the appliance is not installed near a heat source;

• the set temperature is adequate;

• the circulation of air through the ventilation of the appliance is

ensured.

There is water on the

bottom of the refrigerator

compartment.

The defrost water drain is blocked. Clean the defrosting water drain (see section "Cleaning and

Maintenance").

The front edge of the

appliance, at the door

gasket, is hot.

This is not a defect. It prevents

condensation from forming.

No solution is necessary.

The red

icon is ashing

and a sound signal is

activated

Door open alarm

It is activated when the refrigerator

compartment door remains open for a

prolonged period of time.

To turn the sound signal o, close the open door of the product.

The red

icon is ashing,

a sound signal is activated

and the icon is

activated.

Blackout alarm

It is activated when there is a prolonged

interruption to the power supply which

has caused an increase in temperature

in the freezer compartment.

Note: until the blackout alarm is

deactivated, you cannot set a dierent

temperature for the product.

Turning o the sound signal. Check the condition of the food before

consuming it. After pressing the button, the temperature display will

again show the temperature set. If the freezer compartment has not

yet reached the optimal temperature for the preservation of the food,

the freezer compartment temperature alarm may activate (see freezer

compartment temperature alarm).

The red

icon is lit up

(without ashing), a sound

signal is activated and the

temperature indicators is

ashing.

Freezer compartment temperature

alarm

The freezer compartment temperature

alarm indicates that the compartment

is not at the optimum temperature. This

may occur: when using for the rst time,

after defrosting and/ or cleaning, when

freezing large quantities of food or

when the door to the freezer does not

close completely.

To turn o the sound signal, briey press the “Turn o sound alarm”

button (the temperature indicators will stop ashing). When the

optimum temperature conditions have been reached, the red icon will

automatically turn o. If the freezer compartment temperature alarm

continues, contact the Authorised Technical Assistance Service.

The temperature indicators

for the refrigerator

compartment are ashing

as shown in the gure:

Malfunction alarm

The alarm indicates the malfunction of a

technical component.

Call the authorized Technical Assistance Service.

You can download the Safety Instructions, User Manual, Product Fiche and Energy data by:

• Visiting our website docs . hotpoint . eu

• Using QR Code

• Alternatively, contact our After-sales Service (See phone number in the warranty booklet). When

contacting our After-sales Service, please state the codes provided on your product's identication plate.

* Available only on certain models

Specyfikacje produktu

Marka:	Hotpoint
Kategoria:	lodówka
Model:	BCB 4010 E O31

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Hotpoint BCB 4010 E O31, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje lodówka Hotpoint

Hotpoint HTSD18A011A1 Instrukcja

12 Marca 2025

Hotpoint HBUL011.UK Instrukcja

27 Lutego 2025

Hotpoint HSZ 18012 Instrukcja

27 Lutego 2025

Hotpoint HS 18012 Instrukcja

27 Lutego 2025

Hotpoint LECO8 FF2 Instrukcja

26 Lutego 2025

Hotpoint HAC18D041A1 Instrukcja

11 Lutego 2025

Hotpoint BCB 4010 E O31 Instrukcja

6 Lutego 2025

Hotpoint HTR15ABRLCC Instrukcja

15 Stycznia 2025

Hotpoint HTH17BCCRWW Instrukcja

15 Stycznia 2025

Hotpoint RFAA52P Instrukcja

13 Stycznia 2025

Instrukcje lodówka

Najnowsze instrukcje dla lodówka

Ariston BCB311IT Instrukcja

30 Marca 2025

Atag KS38178A Instrukcja

30 Marca 2025

Summit SPRF34D7 Instrukcja

30 Marca 2025

Summit BAR631BK Instrukcja

30 Marca 2025

Amica AR7252W Instrukcja

30 Marca 2025

Bosch KGN39OCAF Instrukcja

30 Marca 2025

Accucold FF6BKBISSHH Instrukcja

29 Marca 2025

Accucold FF6LW7SSHH Instrukcja

29 Marca 2025

Accucold FF7BKBISSHH Instrukcja

29 Marca 2025

Accucold SCRR261GLH Instrukcja

29 Marca 2025