Instrukcja obsługi Honeywell T7350


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Honeywell T7350 (12 stron) w kategorii termostat. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/12
63-2604
® U.S. Registered Trademark
Copyright © 2003 Honeywell International Inc.
All Rights Reserved
T7350
Programmable Thermostat
FOR CONVENTIONAL/HEAT PUMP SYSTEMS
Contents
Features ........................................................................... 2
Settings ............................................................................ 3
Programming ................................................................... 5
2 63-2604
FEATURES
Typically used in buildings (including:
restaurants, shopping malls, office
buildings and banks) under 55,000
square feet.
For single zone rooftop units, split
systems, heat pumps or hot/chilled water
systems.
7-day programming.
Two Occupied and two Not Occupied
periods per day.
Keypad multi-level lockout available with
all models.
Individual heat and cool setpoints
available for Occupied and Not Occupied
periods.
Convenient overrides allow temporary
setpoint changes.
Intelligent Fan™ feature energizes fan
continuously in the Occupied periods. Fan
can also be configured for conventional
heat or electric heat fan operation.
Remote sensor capability for temperature
(including outdoor air and discharge air)
and humidity sensors.
P+I+D control minimizes temperature
fluctuations.
Recovery ramping control automatically
optimizes equipment start times based
on building load.
Thermostat Interface Module (TIM)
connections to thermostat from PDA for
advanced configuration, programming,
etc.
Universal Versaguard™ Thermostat
guards available.
3 63-2604
Auxiliary subbase contact typically
interface with a Honeywell Economizer
System (for total rooftop control
integration) or act as dehumidification
output.
Features Available via PDA
Configuration
365 day clock with holiday programming.
Automatic Daylight Saving Time
adjustments.
Selectable dehumidification limit control.
Modulating output configuration.
Occupancy input to control standby
setpoint.
Additional standby period used in low
traffic areas.
Sequential start option.
Discharge air high/low limits.
Selectable recovery ramp.
Ambient lockout (with outdoor sensor).
SETTINGS
Using Thermostat Keys
The thermostat keys are used to:
set current time and day,
program times and setpoints for heating and
cooling,
override the program temperatures,
display present setting,
set system and fan operation,
perform simple configuration.
NOTE: See Fig. 1 for keypad information.
Setting Temperature
Refer to Table 1 for default temperature
setpoints. See Programming section for
complete instructions on changing these.


Specyfikacje produktu

Marka: Honeywell
Kategoria: termostat
Model: T7350

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Honeywell T7350, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje termostat Honeywell

Instrukcje termostat

Najnowsze instrukcje dla termostat