Instrukcja obsługi Honeywell T6651E CM27 OEM 7-DAY CHRONOTHERM

Honeywell termostat T6651E CM27 OEM 7-DAY CHRONOTHERM

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Honeywell T6651E CM27 OEM 7-DAY CHRONOTHERM (4 stron) w kategorii termostat. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/4
EN0R8505 R1 11/98
T6651E
CM27 OEM 7-DAY
CHRONOTHERM
PRODUCT SPECIFICATION SHEET
The CM27 OEM 7 -Day Chronotherm
can be customised for equipment
manufacturers.
It is designed to provide automatic time
and temperature control of heating and
cooling systems in villas and
apartments.
The controller is based on a new
philosophy of human interface design,
developed in conjunction with a leading
university specialising in the field of
ergonomic research.
The CM27 OEM 7 -Day is designed for
European CEN approval.
FEATURES
• • Attractive modern styling, making it ideal for location
in any type of home
• • 7-day program
• • Up to 4 level changes per day
• • 10 minute program resolution
• • Program switch time disable
• • 5 to 30oC setpoint range with 0.5oC increments
• • 24 hour or 12 hour AM/PM format
• • Proportional plus Integral (P+I) digital control form for
accurate temperature performance
• • Room temperature inquiry
• • Temporary setpoint override
• • Programmable frost protection, 5 to 10oC for
unoccupied periods
• • Battery powered by 2 AA size (LR6) alkaline cells
• • 4 year battery life with low battery warning
• • 24...230 V SPST potential free contacts for simple
2-wire installation
• • 5 A resistive, 2 A inductive switch rating
• • Heating or cooling control
• • System selection links for optimum control
performance
• • Manual mode for use as a simple thermostat
• • Easy-to-use programming controls
• • Built-in default program
• • Brief programming instructions located inside cover
• • Surface or wallbox mounting options
• • Wide range of customisation possibilities
T6651E CM27 OEM 7-DAY CHRONOTHERM
EN0R 8505 R1 11/98
DIMENSIONS
80mm
41mm
145mm
130mm
SPECIFICATIONS
Batteries
:
2 x 1.5 V IEC LR6 (AA) Alkaline cells
Battery life : 4 year minimum (Duracell MN1500)
Battery
replacement : 1 minute memory retention
Switch type : SPST (potential free) SPDT also
available
Electrical rating : 230 V~, 50...60 Hz, 0.1 A to 5 A resistive;
0.1 A to 2 A inductive (0.6 pf)
24 V~, 50...60 Hz, 0.5 A to 5 A resistive
0.5 A to 2 A inductive (0.6 pf)
Time display : 24 hour or 12 hour AM/PM format
Time keeping
accuracy : Better than 10 minutes per year
Program : 7-day with 4 daily independent setpoints
Time setting
resolution : Time of day - 1 minute
Program - 10 minute steps
Temperature
setting range
:
Program -5 to 30
o
C in 0.5 K steps
Frost - 5 to 10o C in 0.5 K steps
Temperature
control accuracy : ±0.5 K (nominal) @ 20oC, 50% load
3 K ∆/hour
Control form : P + I (Proportional + Integral)
Minimum
ON/OFF period : 10% of cycle rate (1 minute minimum)
Cycle rate Selectable by application (see table
below)
Wiring : Terminal block capable of accepting wires
up to 2.5 mm2
Wire access : Mains wiring - rear, right or below
Low voltage wiring - rear, left or below
Dimensions : 130 x 80 x 41 mm (w x h x d)
130 x 145 x 41 mm (w x h x d) (flap open)
Environmental : Operating temperature range 0 to 40oC
Shipping and storage temperature range -
20 to 55oC
Humidity range 0 to 90% rh, non-
condensing
Approvals : Designed to meet European CEN
approvals
APPLICATION CONTROL
Application Cycle Rate Link (LK1,LK2)
Boiler Heating 6as supplied
Air Heating 6cut LK1
Air Cooling* 3cut LK1
Heatpump Heating 6cut LK2
Heatpump Cooling* 3cut LK2
Electric Heating 12 cut LK1 +LK2
Thermal Actuator 12 cut LK1+LK2 *Refer to the note on Cooling System Control on page 4
T6651E CM27 OEM 7-DAY CHRONOTHERM
3EN0R 8505 R1 11/98
LOCATION
The CM27 OEM Chronotherm is the temperature control
element in the heating/cooling system and MUST be located
in a position with good air circulation at average room
temperature on an inside wall 1.5 meters above the floor
level. Do not position the CM27 OEM Chronotherm near
sources of heat (radiators, hot air vents, TV or lights), near
doors or windows, or in direct sunlight.
MOUNTING
The CM27 OEM Chronotherm can be mounted directly on the
wall surface or on an electrical wallbox.
WIRING
The CM27 OEM Chronotherm is designed for fixed wiring
only and must be installed in accordance with latest l.E.E.
regulations. Ensure the wiring connection to the supply is via
a fuse rated at no more than 5 amps and a Class "A" switch
(having contact separation of at least 3 mm in all poles).
IMPORTANT
1. The installer must be a trained service engineer
2. Disconnect the power supply before beginning
installation
INSTALLATION
ORDERING SPECIFICATION
Model Logo Carlton Literature
T6651E1003 None Plain white English
NOTE: The model shown opposite can be ordered as
samples to establish the exact customisation
requirements
CUSTOMISATION POSSIBILITIES
❑ Customer's logo in single or multi-colours
❑ Customer's logo on literature
❑ Additional language flap labels
❑ Six level changes per day
❑
Screws for easy installation
❑ Holiday mode
❑ Carton: single colour
printing multi colour
full colour
❑
Alternative relay ratings including SPDT version

Specyfikacje produktu

Marka: Honeywell
Kategoria: termostat
Model: T6651E CM27 OEM 7-DAY CHRONOTHERM

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Honeywell T6651E CM27 OEM 7-DAY CHRONOTHERM, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje termostat Honeywell

Honeywell

Honeywell Day Night Round T8700A Instrukcja

4 Października 2024
Honeywell

Honeywell Round on-off T87G1006 Instrukcja

4 Października 2024
Honeywell

Honeywell RTH9585WF Instrukcja

2 Października 2024
Honeywell

Honeywell TH2210DV1006/U Instrukcja

2 Października 2024
Honeywell

Honeywell CM5000 Instrukcja

29 Września 2024
Honeywell

Honeywell T822L1000/U Instrukcja

29 Września 2024
Honeywell

Honeywell BACnet TB3026B Instrukcja

27 Września 2024
Honeywell

Honeywell CT53K1006/E1 Instrukcja

27 Września 2024
Honeywell

Honeywell TH6320WF2003/U Instrukcja

23 Września 2024
Honeywell

Honeywell RTH221B1039/U1 Instrukcja

22 Września 2024

Instrukcje termostat

Najnowsze instrukcje dla termostat

Siemens

Siemens RDG100T Instrukcja

15 Października 2024
Junkers

Junkers TA 21E Instrukcja

14 Października 2024
Oreg

Oreg AT90E Instrukcja

9 Października 2024
Oreg

Oreg AT60E Instrukcja

9 Października 2024
Heatit

Heatit PRO Instrukcja

9 Października 2024
Heatit

Heatit MULTIREG6 Instrukcja

9 Października 2024
Avidsen

Avidsen HomeFlow W Instrukcja

9 Października 2024
ORNO

ORNO OR-SH-17701 Instrukcja

8 Października 2024
ORNO

ORNO OR-SH-17702 Instrukcja

8 Października 2024
STI

STI -9102 Instrukcja

8 Października 2024