Instrukcja obsługi Honeywell T4398B1003/U

Honeywell termostat T4398B1003/U

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Honeywell T4398B1003/U (1 stron) w kategorii termostat. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/1
272804A
RANGE STOP AND COVER LOCKING
ASSEMBLY FOR HONEYWELL
ELECTRIC HEATING THERMOSTATS
For Models:
T498 (manufactured after November 1993),
T410, T4398, T4098
SECURITY FEATURES
Locking Cover, Figure 1
Remove cover by swinging
up from the bottom.
Insert Tinnerman Speed Nut
supplied into slot at upper and
lower rear of thermostat base.
Drive Allen screws into Speed Nuts
until head is flush with lower edge
of Thermostat base.
Re-install cover and lock by backing
out Allen screws until screw body
protrudes through cover hole.
To unlock cover, drive Allen screws
into thermostat base until screws
body clears cover.
®
Set thermostat to desired set point
Remove cover.
Install plastic dowels supplied into
minimum and/or maximum range
stop holes on inside back of cover.
Re-install cover. Check operation
of range stops.
1.
2.
3.
4.
5.
1.
2.
3.
Figure 1
Range Stops, Figure 2
Figure 2
MOD 08-97 Honeywell Ltd. 1994 Printed in Mexico Form No. 95C-10708-1


Specyfikacje produktu

Marka: Honeywell
Kategoria: termostat
Model: T4398B1003/U

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Honeywell T4398B1003/U, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje termostat Honeywell

Instrukcje termostat

Najnowsze instrukcje dla termostat