Instrukcja obsługi Honeywell ST9400C
Honeywell
Kontrola temperatury
ST9400C
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Honeywell ST9400C (18 stron) w kategorii Kontrola temperatury. Ta instrukcja była pomocna dla 13 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/18
ST9400C – User Guide
7 day Programmer
2 channel, 3 on/off per day
Honeywell Control Systems Ltd.
Arlington Business Park,
Bracknell
Berkshire
RG12 1EB
Technical Help Desk: 08457 678999
www.honeywelluk.com
50022737-005 A
© 2007 Honeywell International Inc.
Features
Easy to use slider and buttons combined with ‘LoT’™ Technology and an
‘OK’ button, allows you to confirm changes and stay in control.
LoT™ Technology provides you with informative ‘on-screen’ feedback and operational
assistance as and when required.
Extra Large LCD (Liquid Crystal Display) with Backlight provides added user
friendliness and clearer viewing – even in the dark.
Independent 7-day Heating & Hot Water Programmes let you choose settings
built into ST9400C for each day of the week to match your lifestyle, while maximising
energy savings, or alter them to your personal settings.
Automatic Summer/Winter Time Change will adjust the clock forward and backward
automatically when the clocks change, saving you having to change your ST9400C
every time.
Built-in Memory holds your programme indefinitely - even if the mains power fails.
Energy Efficiency and the Environment
Home energy use is responsible for more than ¼ of the total UK carbon emissions
which contribute to climate change. Heating and hot water systems based on
boilers account for of this figure, so it is important to understand how your
controls can help to maximize energy efficiency while maintaining your comfort.
Your Programmer should be used in conjunction with appropriate temperature
controls. In order to save energy the following general points should be
observed:
1. Ensure your system contains a room thermostat and a hot water thermostat,
and that both are set to appropriate temperature levels: typically 20°C for the
room temperature and between 55 - 60°C for the hot water temperature.
2. Programme your heating and hot water to be off when you are not in the house.
If you are concerned about possible frost damage to any exposed pipe work, it
is advisable to fit a frost protection system – your installer can advise you about
this.
3. Think about how you use your domestic hot water – if you have a storage
system, it is not necessary to have this switched on all the time, even when you
are in the house.
4. Consider the heat up times required for your central heating. Every home
responds differently when the heating is switched on. Adjust the start time so
that you are not cold when you get up in the morning. A shorter heat up time is
required for other heating periods.
5. In the evening, when the house is up to temperature, it is often possible to
switch off the heating up to an hour before you go to bed, without any noticeable
reduction in comfort.
PLEASE RESPECT YOUR ENVIRONMENT!
Take care to dispose of this product and any packaging or literature in an appropriate way
This product and its associated documentation and packaging are protected by various intellectual
property rights belonging to Honeywell Inc. and its subsidiaries and existing under the laws of the UK
and other countries. These intellectual and property rights may include patent applications, registered
designs, unregistered designs, registered trade marks, unregistered trade marks and copyrights.
Honeywell reserves the right to modify this document, product and functionality without notice. This
document replaces any previously issued instructions and is only applicable to the product(s)
described.
This product has been designed for applications as described within this document. For use outside of
the scope as described herein, refer to Honeywell for guidance. Honeywell cannot be held responsible
for misapplication of the product(s) described within this document.
Manufactured for and on behalf of the Environment and Combustion Controls Division of Honeywell
Technologies Sarl, Ecublens, Route du Bois 37, Switzerland by its Authorised Representative Honeywell Inc.
This document is to be left with the user
and forms part of a Home Information Pack
WHAT IS A PROGRAMMER?
...an Explanation for Householders
(as recommended by the Energy Savings Trust)
Programmers allow you to set ‘On’ and ‘Off’ time periods. Some models switch the central heating
and domestic hot water on and off at the same time, while others allow the domestic hot water
and heating to come on and go off at different times. Set the ‘On’ and ‘Off’ time periods to suit
your own lifestyle. On some programmers you must also set whether you want the heating and hot
water to run continuously, run under the chosen ‘On’ and ‘Off’ heating periods, or be permanently
off. The time on the programmer must be correct. Some types have to be adjusted in spring and
autumn at the changes between Greenwich Mean Time and British
Summer Time. You may be able to temporarily adjust the heating
programme, for example, ‘Override’, ‘Advance’, or ‘Boost’. These
are explained in the manufacturer’s instructions. The heating will
not work if the room thermostat has switched the heating off. And,
if you have a hot-water cylinder, the water heating will not work if
the cylinder thermostat detects that the hot water has reached the
correct temperature.
HOT WATER HEATING
EXTRA HOUR
OVERRIDE
EXTRA HOUR
OVERRIDE
NEXT
DAY
COPY
DAY
HOLIDAY
OK
NEXT
DAY/TIME
HOT WATER
HEATING
RUN
ST9400C
Contents
WHAT IS A PROGRAMMER?
General Description ........................................................................................3
The way to use a Programmer ........................................................................3
GETTING STARTED WITH YOUR ST9400C
Step 1: Setting the Date & Time .....................................................................4
Step 2: Running a Built-in Programme ...........................................................5
PROGRAMMING YOUR ST9400C
The Built-in Programmes ................................................................................6
Your Personal Programme ..............................................................................6
Reviewing the Programme Times ...................................................................7
Modifying the Hot Water Programme .............................................................7
Copying one day’s Programme to another day .....................................8
Programming a Different Day.................................................................8
Exiting HOT WATER Programming Mode ..............................................9
Modifying the Heating Programme .................................................................9
Exiting HEATING Programming Mode ...................................................9
Disabling/Enabling Time Periods ...................................................................9
OPERATING YOUR ST9400C
Choosing the Operating Mode .....................................................................10
Override the Operation Without Changing the Programmes........................10
The Extra Hour Function ...............................................................................11
The Holiday Function ....................................................................................11
FINE TUNING YOUR ST9400C
Changing From AM/PM Time display to the 24-hour Clock .........................12
Changing the Installer Parameters ...............................................................12
FAQ & TROUBLESHOOTING
How do I set the time only, if the ST9400C clock is not correct? ..................14
What do I do when the clocks go back in October and forward in March? .14
What should I do if I get ‘lost’ while programming the ST9400C? ................14
What happens if there is a power failure? ....................................................14
Troubleshooting Guide .................................................................................15
MINI-PROGRAMMER OPERATING INSTRUCTIONS
(Installer to tick if configured in this way)
What is a Mini-Programmer?.........................................................................16
Modifying the Heating & Hot Water Programme ..........................................16
Exiting HEATING & HOT WATER Programming Mode .................................16
Disabling/Enabling Time Periods .................................................................17
Choosing the Operating Mode .....................................................................17
Override and Extra Hour Functions ..............................................................17
Other Functions ............................................................................................17
CONFIGURATION & SERVICE DATA
Configuration Data (to be completed by Installer) .......................................18
Boiler & System Service Log ........................................................................19
ST9400C Controls Layout
Hot Water Operating Mode Indicator
Time Display
LoT™ Technology Display
Programme Time Markers
Day of Week Indicator
Heating Operating Mode Indicator
Heating Extra Hour Button
Heating Indicator Lamp
Heating Override Button
Slider
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
19
18
Heating Operating Mode Button
OK/Next Button
Clock – and + Buttons
Hot Water Operating Mode Button
Holiday Button
Copy Day Button
Next Day Button
Hot Water Override Button
Hot Water Indicator Lamp
Hot Water Extra Hour Button
20
19
18
17
16
15
20
1 2 3 54 6
8
9
7
13 12
10
1114
19
CONFIGURATION & SERVICE DATA
Boiler & System Service Log
The space below can be used to provide a record of boiler & system services and
the names and contact numbers of the Installer and Service Personnel.
This information is important for a Home Information Pack.
Service/Installation
Date
Installation/Service
Engineer
Telephone Number /
Contact Details
Keep this document in a Home Information Pack
3
WHAT IS A PROGRAMMER?
General Description
Your Honeywell ST9400C provides timing control for both your central heating and
hot water systems, letting you set ON and OFF periods to suit your own lifestyle.
The ST9400C does not directly control the temperature but works together with other
temperature controls, such as room thermostats and cylinder thermostats, to control
your heating and hot water system in your home.
With 7-day programming and up to 3 on/off periods per day, every day can be set
differently, and heating and hot water can be set at different times from each other.
The following instructions explain how to programme and use the ST9400C to
provide the most home comfort at the least cost.
The way to use a Programmer
Think about the time periods when you are typically in the house and when you are
not, and also the times when you use a lot of hot water. These are the times you
should use as the basis for the programmes. It will be necessary to allow some
heat-up time for the heating system after periods when it has been off – this would
typically be 1 - 1½ hours, depending on your house and your preferences.
Other features are commonly available on the Programmer to enhance comfort and
convenience, for example, OVERRIDE, EXTRA HOUR, and MODE buttons.
A typical use of the OVERRIDE feature is when you return home unexpectedly for
the rest of the day and the heating is off. Just press the OVERRIDE button and the
heating will come on until the next programme time, at which point it will follow the
normal programme. The advantage here is that you do not have to remember to
switch off because the normal time programme does this for you.
A typical use of the EXTRA HOUR button would be if you returned to the house for
a short period when the heating and hot water were off. Pressing the appropriate
EXTRA HOUR button gives you 1, 2, or 3 hours of heating, exactly when you need
it. Another typical use is when the heating is already on and you want it to stay on a
little longer - just press EXTRA HOUR and, for that day only, an hour will be added
to the end of the time at which heating normally goes off.
The MODE buttons allow you to select how you want to operate heating and hot
water independently. The most obvious use is to switch heating OFF during the
summer months, but you may also use this feature if you take a mid-week day off
work, you can then set the MODE to ONCE to keep the system ON during the day
from the first programmed ON time till the last programmed OFF time.
Specyfikacje produktu
| Marka: | Honeywell |
| Kategoria: | Kontrola temperatury |
| Model: | ST9400C |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Honeywell ST9400C, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Kontrola temperatury Honeywell
4 Lipca 2024
3 Lipca 2024
30 Czerwca 2024
Instrukcje Kontrola temperatury
- Kontrola temperatury Bosch
- Kontrola temperatury Remeha
- Kontrola temperatury Buderus
- Kontrola temperatury Danfoss
- Kontrola temperatury Atag
- Kontrola temperatury Junkers
- Kontrola temperatury ACV
- Kontrola temperatury EQ-3
- Kontrola temperatury Ventus
- Kontrola temperatury Barbecook
- Kontrola temperatury Bulex
- Kontrola temperatury ICY
- Kontrola temperatury WTH
- Kontrola temperatury Sentiotec
- Kontrola temperatury Velbus
- Kontrola temperatury Thermomax
- Kontrola temperatury Landis Staefa
- Kontrola temperatury Infresco
- Kontrola temperatury Plugwise
Najnowsze instrukcje dla Kontrola temperatury
5 Października 2024
28 Września 2024
26 Września 2024
25 Września 2024
25 Września 2024
25 Września 2024
25 Września 2024
25 Września 2024
24 Września 2024
24 Września 2024