Instrukcja obsługi Honeywell RTH7560E

Honeywell termostat RTH7560E

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Honeywell RTH7560E (40 stron) w kategorii termostat. Ta instrukcja była pomocna dla 17 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/40

RTH7500 Series

Programmable Thermostat

Quick Installation Guide

Tools you will need Tools you may need

Wire stripper

Needle-nose pliers Drill and

drill bit (7/32 in)

Included in your box

Screws and

anchors

UWP

Mounting

System

(UWP)

RTH7500

Thermostat

Quick Install Guide

Small ﬂat head scr

ewdriver

Phillips scr

ewdriver

Pencil

Level

Quick Installation Guide

Removing your old thermostat

2 Check that your system is off.

Change the temperature on your

old thermostat. If you don’t hear the

system turn on within 5 minutes, the

power is off.

1 Turn power OFF.

To protect yourself and your

equipment, Turn off the power at the

breaker box or switch that controls

your heating/cooling system.

3 Remove the old thermostat’s

faceplate.

On most thermostats, you can take

off the faceplate by grasping and

gently pulling. Some thermostats

may have screws, buttons, or clasps.

Do not remove any wires from your

thermostat at this time!

OFF

Breaker box

Switch

4 Make sure there are no 120/240V

wires.

Do you have thick black wires with

wire nuts?

Is your thermostat 120V or higher?

If you answered yes to either of

these questions, you have a line

voltage system and the thermostat

will not work.

If you are unsure visit:

yourhome.honeywell.com/support

Wire nut

Thick black wire

RTH7500 Series

5 Take a picture of how your wiring

looks right now.

Be sure to include the letters

next to the terminals where the

wires are inserted. This will be a

helpful reference when wiring your

thermostat.

Tip: If the color of your wires has

faded or if 2 terminals have the

same wire color, use the wire labels

provided in the package to label

each wire.

6 Remove any jumpers

A jumper connects one terminal to

another terminal. It may look like

a small staple or even a colored

wire and must be removed before

continuing. Use a screwdriver to

release wires from terminals.

The RTH7500 thermostat does not

need jumpers.

YR RC

Example of

a jumper

Terminals

7 Record if you have wires in the following terminals.

Do not include jumpers as a part of your count. The thermostat does not

need jumpers.

Terminal Wire Color

8 Write down the color of the wires.

Check mark the wires that are connected to terminals. Next to the check mark,

write down the color of the wire. Do not include jumpers as a part of your

count.

Check all that apply (Not all will apply):

Terminal Wire Color

A or L/A

O/B

W2 or AUX

The RTH7500 thermostat does not support L/A, S, or U terminals.

If there are wires in terminals that are not listed, you will need additional

wiring support. Visit yourhome.honeywell.com/support to find out if the

thermostat will work for you.

Specyfikacje produktu

Marka:	Honeywell
Kategoria:	termostat
Model:	RTH7560E
Kolor produktu:	Grey, White
Wysokość produktu:	98.04 mm
Szerokość produktu:	136.14 mm
Głębokość produktu:	27.43 mm
W zestawie pilot zdalnego sterowania:	Nie
Typ ekranu:	Cyfrowy
Podświetlenie wyświetlacza:	Tak
Funkcja pamięci:	Nie
Inteligentny termostat:	Tak
Chłodzenie:	Tak