Instrukcja obsługi Honeywell RLV3120


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Honeywell RLV3120 (12 stron) w kategorii termostat. Ta instrukcja była pomocna dla 17 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/12
Owner’s Manual
Read and save these
instructions.
For help please visit
yourhome.honeywell.com
RLV3120
Non-programmable
Thermostat
Application
This thermostat can be used to control an electric heating system such as a baseboard
heater or a convector.
The thermostat be used with:CANNOT
a resistive load under 0.83 A
a resistive load over 8.3 A
a system driven by a contactor or a relay (inductive load)
a fan-forced heating system (e.g. : fan-forced convector)
a central heating system.
WARNING Electrical Shock Hazard.
This thermostat is a line voltage control (120–240 Volts). Do not install it if you are
not completely familiar with house wiring. If handled improperly, there is risk of
electric shock hazard, which may cause serious injury or death.
Do you need assistance? We are here to help.
Call 1-800-468-1502 for wiring assistance before returning the
thermostat to the store.
2
ATTENTION: MERCURY RECYCLING NOTICE
This product does not contain mercury. However,
this product may replace a product that contains
mercury. Mercury and products containing
mercury should not be discarded in household
trash.
For more information on how and where to
properly recycle a thermostat containing
mercury in the United States, please refer to the
Thermostat Recycling Corporation at
www.thermostat-recycle.org.
For mercury thermostat recycling in Canada,
please refer to Switch the Stat at
www.switchthestat.ca
N O M E R C U RY
Hg
SUPPLIED PARTS
One (1) thermostat
Two (2) 6-32 mounting screws
Two (2) solderless connectors
Temperature display and setting
Up button
Down button
Appears when the
setpoint is displayed
Temperature display
Heating intensity
indicator
(No image appears
when heating is off.)
The thermostat normally displays the actual (ambient) temperature.
To view the setpoint temperature, briefly press the or button. The Up Down
setpoint will be displayed for 5 seconds.
To change the setpoint temperature, press the or button until the Up Down
desired value is displayed.
3
Removing the faceplate
WARNING
TURN OFF POWER TO THE
HEATING SYSTEM AT THE
MAIN POWER PANEL TO
AVOID ELECTRIC SHOCK.
Loosen the screw holding the
faceplate to the base. The screw
cannot be completely removed
and remains captive on the base.
Remove the faceplate from the base
by pulling the bottom half.
4-wire Installation2-wire Installation
Wiring
Connect either one of the thermostat wires to the heater wire and the other one
to the power supply wire using solderless connectors for copper wires.
NOTE: All cables and connections must conform to the local electrical code.
Special CO/ALR solderless connectors must be used when connecting with
aluminium conductors.
Power supply
Power supply


Specyfikacje produktu

Marka: Honeywell
Kategoria: termostat
Model: RLV3120

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Honeywell RLV3120, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje termostat Honeywell

Instrukcje termostat

Najnowsze instrukcje dla termostat

Siemens

Siemens RDG100T Instrukcja

15 Października 2024
Junkers

Junkers TA 21E Instrukcja

14 Października 2024
Oreg

Oreg AT90E Instrukcja

9 Października 2024
Oreg

Oreg AT60E Instrukcja

9 Października 2024
Heatit

Heatit PRO Instrukcja

9 Października 2024
Heatit

Heatit MULTIREG6 Instrukcja

9 Października 2024
Avidsen

Avidsen HomeFlow W Instrukcja

9 Października 2024
ORNO

ORNO OR-SH-17701 Instrukcja

8 Października 2024
ORNO

ORNO OR-SH-17702 Instrukcja

8 Października 2024
STI

STI -9102 Instrukcja

8 Października 2024