Instrukcja obsługi Honeywell FocusPRO 6000

Honeywell termostat FocusPRO 6000

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Honeywell FocusPRO 6000 (24 stron) w kategorii termostat. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/24
FocusPRO
®
6000 Series
Programmable
Digital
Thermostat
User Guide
Read and save these instructions.
For help please visit yourhome.honeywell.com
Function buttons
Press to select the
function displayed just
above each button.
(Functions change
depending on the task.)
Temperature buttons
Press to set preferred temperature.
Battery holder
Thermostat controls
Digital display
Hold Button
Press to override programmed
temperature control
Reference card
2
Set Clock/Day/
Schedule
Auto
Wake Wed
Fan
In Recovery
System
Auxiliary
Heat On
Heat
Heat
Setting
Inside
AM
72
72
6:30
Replace Battery
MCR29458
Display screen
Low battery
warning
Press the FAN
button to select:
Auto: Fan runs only
when heating or
cooling system is on.
On: Fan runs
continuously.
Press the SYSTEM button
to select:
Heat: Heating system control.
Cool: Cooling system control.
Off: All systems off.
Auto: Thermostat
automatically selects heating
or cooling depending on the
indoor temperature.
Em Heat: Emergency &
Auxiliary Heat control.
Compressor is locked out.
(Select models only.)
Function buttons
Press the button beneath
each function to view
or change settings
(functions change
depending on the task)
System Status
Cool On: Cooling system
is on.
Heat On: Heating system
is on.
Temperature setting
Current inside
temperature
Auxiliary heat (Only
for heat pumps with
auxiliary heat)
Press the SET
button to change:
Clock: Current time.
Day: Current day.
Schedule: Current
thermostat program
schedule.
Program Schedule
You can program four time periods each day, with different settings for weekdays
and weekends. We recommend the pre-set settings (shown in the table below),
since they can reduce your heating/cooling expenses.
Wake - Set to the time you
awaken and the temperature you
want during the morning, until
you leave for the day.
Leave - Set to the time you leave
home and the temperature you
want while you are away (usually
an energy-saving level).
Return - Set to the time you
return home and the temperature
you want during the evening, until
bedtime.
Sleep - Set to the time you go to bed and the temperature you want overnight
(usually an energy-saving level).
NOTE: Leave and Return periods can be canceled on weekends.
Heat Cool
Wake
(6:00 am) ° °
Leave
(8:00 am) ° °
Return
(6:00 pm) ° °
Sleep
(10:00 pm) ° °
3
Program schedule override (temporary)
To adjust program schedules
1. Press SET CLOCK/DAY/SCHEDULE,
then .SET SCHEDULE
2. Press weekday
or to set your
Wake time (Mon–Fri), then press
NEXT.
3. Press or to set the temperature
for this time period, then press NEXT.
4. Set time and temperature for the
next time period (Leave). Repeat
steps 2 and 3 for each weekday time
period.
5. Press weekendNEXT to set time
periods (Sat-Sun), then press DONE
to save & exit.
NOTE: Make sure the thermostat is
set to the system you want to program
(Heat or Cool).
NOTE: You can press to CANCEL PERIOD
eliminate unwanted time periods (except
Wake).
Set Clock/Day/
Schedule
Auto
Fan System
Cool
Done
Set Set Day Schedule
Mon d Tue We Thu Fri
Done CancelPeriod
Leave
Set Schedule
Next
Heat
Setting
AM
62
8:00
MCR29462
Run Schedule
Auto
Fan System
Heat
Heat
Setting
Inside
AM
69
75
6:30
Temporary
MCR29463
Press or to immediately adjust
the temperature. This will temporarily
override the temperature setting for
the current time period.
The new temperature will be
maintained only until the next
programmed time period begins.
For example, if you want to turn up
the heat early in the morning, it will
automatically be lowered later, when
you leave for the day.
To cancel the temporary setting at
any time, press RUN SCHEDULE .
NOTE: Make sure the thermostat is
set to the system you want to control
(heat, cool or auto).


Specyfikacje produktu

Marka: Honeywell
Kategoria: termostat
Model: FocusPRO 6000

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Honeywell FocusPRO 6000, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje termostat Honeywell

Instrukcje termostat

Najnowsze instrukcje dla termostat

Siemens

Siemens RDG100T Instrukcja

15 Października 2024
Junkers

Junkers TA 21E Instrukcja

14 Października 2024
Oreg

Oreg AT90E Instrukcja

9 Października 2024
Oreg

Oreg AT60E Instrukcja

9 Października 2024
Heatit

Heatit PRO Instrukcja

9 Października 2024
Heatit

Heatit MULTIREG6 Instrukcja

9 Października 2024
Avidsen

Avidsen HomeFlow W Instrukcja

9 Października 2024
ORNO

ORNO OR-SH-17701 Instrukcja

8 Października 2024
ORNO

ORNO OR-SH-17702 Instrukcja

8 Października 2024
STI

STI -9102 Instrukcja

8 Października 2024