Instrukcja obsługi Honeywell CO70PE

Honeywell Klimatyzator CO70PE

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Honeywell CO70PE (8 stron) w kategorii Klimatyzator. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/8
CL70PE / CO70PE
www.honeywellaircoolers.com
www.jmatek.com
E-mail: usinfo@jmatek.com
Model:
Scan here:
Portable Evaporative Air Cooler
User Manual
Read and save these instructions before use
1) Control Panel
2) Handle
3) Louvers
4) Water Level Indicator
5) Casters
6) Ice Compartment Lid
7) Power Cord Wrap
8) Water Tank
9) Power Cord & Plug
10) Plastic Net Filter
11) Rear Grill Screw
12) Honeycomb Cooling Media
13) Rear Grill
14) Water Regulator
15) Water Fill Door
16) Water Inlet Valve
17) Drain Plug
PARTS DESCRIPTION
(5)
(1)
(2)
(3)
(10)
(8)
(11)
(12)
(14) (16)
(15)
(13)
(17)
(6)
(7)
(4)
(9)
WARNING -- READ AND SAVE THE AIR COOLER SAFETY & MAINTENANCE GUIDE AND USER
MANUAL BEFORE USING THIS PRODUCT. FAILURE TO FOLLOW THESE INSTRUCTIONS MAY
DAMAGE AND/ OR IMPAIR ITS OPERATION AND VOID THE WARRANTY. IN CASE THERE IS
ANY INCONSISTENCY OR CONFLICT BETWEEN THE ENGLISH VERSION AND ANY OTHER
LANGUAGE VERSION OF THE CONTENT OF THIS MATERIAL, THE ENGLISH VERSION SHALL
PREVAIL.
WARNING: FOR OUTDOOR MODEL CO70PE, USE ONLY ON GFCI PROTECTED RECEPTACLES.
USE & OPERATION
CONTROL PANEL
FUNCTION BUTTONS
POWER
Press the POWER button to turn the unit on. The cooler will start automatically at medium speed. After a
few seconds the speed will switch to low. To turn the unit off, press the button again.
MODE
Press the MODE button to activate evaporative cooling and/or louver swing modes.
Press the MODE button until the “S” indicator light is illuminated on the control panel.
The Vertical Louvers will begin to move left to right automatically.
Press the MODE button until the “C” indicator light is illuminated to activate evaporative
cooling. The water pump will operate and you will feel the cooler air after the Honeycomb
Cooling Media is completely wet.
H M L 0.5 1 2 4S C
MODE SPEED POWER TIMER SWING(H)
SWING(V)
Icons on Display Screen
Power
Timer
Swing
(Horizontal Louvers)
Swing
(Vertical Louvers)
Cool
Speed
LOUVER
MOVEMENT
EN 1
EN 2
Pressing the MODE button until both “S” and “C” are illuminated will activate both Swing (Vertical
Louvers) and Cool modes simultaneously.
Note: When the “C” mode is not selected, the unit functions in a fan only mode, without evaporative
cooling.
SPEED
Press the SPEED button repeatedly to change the speed between High - Medium - Low.
The indicator light will show the selected speed:
TIMER
Press the TIMER button until the desired time duration setting is selected. When the set time has
passed, the unit will automatically turn off (unit remains in Standby mode until power cord is unplugged
from electrical socket). The TIMER function allows you to program the unit for up to 7.5 hours of use.
SWING(H)
Press the SWING (H) button until the indicator light turns on. This activates the
Horizontal Louvers and they will begin to move up and down automatically.
USE & OPERATION (CONTINUED)
FUNCTION BUTTONS (CONTINUED)
REMOTE CONTROL
ROOM COOLING AND HUMIDIFYING
: ON / OFF
: Controls the motion of the horizontal louvers
: Controls the Timer function for automatic off
: Controls the motion of the vertical louvers and
evaporative Cooling On / Off
: Low / Medium / High
POWER
SWING
TIMER
MODE
SPEED
Water Regulator
MIN
MAX
In cooling mode, Honeywell Air Coolers provide cool, moist air through the
evaporation of water. There is a manual Water Regulator knob located
behind the ice compartment of the unit. This allows you to adjust the
amount of water pumped over the Honeycomb Cooling Media, thus helping
to control cooling and humidification levels.
When the Water Regulator is set to MIN, the water pump distributes a
minimal amount of water to the Honeycomb Cooling Media. This results in
less water evaporation and reduces the cooling effect.
When the Water Regulator is set to MAX, the water pump distributes the maximum amount of water to
the Honeycomb Cooling Media. This results in maximum water evaporation and greater cooling
performance.
High (H) Medium (M) Low (L)
LOUVER
MOVEMENT
SWING (H)
SPEED
TIMER MODE
ON/OFF

Specyfikacje produktu

Marka: Honeywell
Kategoria: Klimatyzator
Model: CO70PE

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Honeywell CO70PE, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Klimatyzator Honeywell

Honeywell

Honeywell HJ series Instrukcja

4 Lipca 2024
Honeywell

Honeywell CS074AE Instrukcja

3 Lipca 2024
Honeywell

Honeywell ES800 Instrukcja

2 Lipca 2024
Honeywell

Honeywell MN09CHESBB Instrukcja

1 Lipca 2024
Honeywell

Honeywell CO70PE Instrukcja

30 Czerwca 2024
Honeywell

Honeywell MN13 Series Instrukcja

28 Czerwca 2024

Instrukcje Klimatyzator

Najnowsze instrukcje dla Klimatyzator

Einhell

Einhell BMK 2400E Instrukcja

14 Października 2024
Airwell

Airwell QUATTRO DC Inverter Instrukcja

5 Października 2024
Mobile Airco

Mobile Airco PC35-AMB Instrukcja

5 Października 2024
Haier

Haier AS12GB2HRA Instrukcja

5 Października 2024
SMD

SMD Afstandsbediening Instrukcja

26 Września 2024
Fujitsu

Fujitsu ASYG 30LF Instrukcja

24 Września 2024
Fujitsu

Fujitsu ASYG 07LE Instrukcja

24 Września 2024
Fujitsu

Fujitsu AOT90TP Instrukcja

24 Września 2024
Rowenta

Rowenta AU4010 F0 - Intense Cool Instrukcja

23 Września 2024
Olimpia Splendid

Olimpia Splendid ARYAL S1 E TRIAL INVERTER 21 Instrukcja

23 Września 2024