Instrukcja obsługi Honeywell CM701


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Honeywell CM701 (16 stron) w kategorii termostat. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/16
AUTO
1234567
CM701 ..................................2-6
CM707 ................................7-11
USER GUIDE
Features
Ergonomic user interface featuring an ‘OK-button’.
Large LCD (Liquid Crystal Display) Screen
with
backlight.
4 independent temperature levels (from 5°C to 35°C).
Automatic Summer/Winter Time Change.
Optimum Start to achieve the right temperature at the
right time.
Built-in Memory holds the user program indefinitely.
Description
The Honeywell CM701 is a
programmable room thermostat
designed to control your heating
system efficiently, providing
comfortable temperatures when
you are at home and energy
savings when you are away. The
following instructions explain how
to program and use the thermostat
to provide the most home comfort
at the least cost.
Controls Layout
LCD Screen
Battery Low Indicator
Time Display
Burner On Indicator
Temperature Display
1
2
3
6 11
12
13
7
8
9
10
4
5
Battery Cover
Program Buttons
Time Change Buttons
Set Date Button
Temperature Change Buttons
Temperature Enquiry Button
Operating Mode Buttons
Green OK Button
Battery Compartment
..4
AUTO
AUTO
MAN
OFF
13
1 2 43 5
7
8
9
6
11
12
10
PROGRAM
CM70
DATE
14
14
CM701 - USER GUIDE
SETTING-UP THE CM701 Getting Started’
This section shows you how to setup and run the thermostat in 3 simple steps:
STEP 1: Installing the Batteries
Note: Please follow the instructions in this section only if the thermostat screen is blank (no
symbols or digits are displayed). If the room temperature is already displayed move on to Step 2:
Setting the Date and Time.
To install the Batteries:
a. Lift up the front cover of the thermostat to reveal the battery cover and product controls.
b. Remove the battery cover by pressing down and sliding out.
c. Insert the 2 x AA LR6 Alkaline Batteries supplied with the thermostat, ensuring the correct
orientation (see ‘Controls Layout’ on page 2).
d.
After a short pause the thermostat will display information on the screen and is now ready for use.
e. Replace the battery cover by sliding it firmly back into the front of the thermostat.
STEP 2: Setting the Date and Time
To set the Date and Time:
a. Press the DATE button to begin setting the date. When you set
the date for the first time after the batteries are inserted, the
display will show:
Press the or buttons to set the current day of the month
(e.g. = 1d 01 st day of the month) then press the green
button to confirm.
b. Press the buttons to set the current month of the or
year (e.g. = January) then press the green button to m 01
confirm.
c. Press the buttons to set the current year (e.g. or yr 06
= 2006) then press the green button to confirm.
The date is now stored.
d. Use the or buttons to set the correct time then press
the green button to confirm. Each press of the buttons will
change the time by one minute and holding them down will
change the time slowly at first and get progressively quicker.
Note: If this mode is entered accidentally then press the
AUTO MAN OFF , or buttons to exit.
STEP 3: Running the Built-in Heating Program
The thermostat is now ready for operation. Press the AUTO button and the built-in heating program
will start running. Note: The built-in heating program has been designed to provide normal comfort
requirements, but if you want to customise the settings please see the next section ‘Programming
the CM701’.
AM


Specyfikacje produktu

Marka: Honeywell
Kategoria: termostat
Model: CM701

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Honeywell CM701, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje termostat Honeywell

Instrukcje termostat

Najnowsze instrukcje dla termostat