Instrukcja obsługi Hitachi HSB40B16

Hitachi głośnik HSB40B16

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Hitachi HSB40B16 (24 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/24
133W Bluetooth®SoundBar
Model:HSB40B16
Model:HSB32B26
Owner’sGuide
Thankyoufor purchasing thisHitachiproduct.Pleasereadtheseinstructionscarefully.
Youmaydownload,saveandprintthisOwner’sGuideforfuturereference.
Foradditionalassistance please call800.HITACHI(800.448.2244).
ForfurtherinformationonHitachiproducts,pleasevisitwww.hitachi.us/tv .
Revision021113
Table of Contents
Important Safety Instructions --------------------------------------------------------
Chapter 1 – Introduction and Placement ----------------------------------------------
Chapter 2 – Indicators and Buttons ---------------------------------------------
Chapter 3 – Quick Connect Guide -----------------------------------------------
Chapter 4 – Connecting the Sound Bar ---------------------------------------------------
Chapter 5 – Controlling the Sound ---------------------------------------------
Chapter 6 – Care and Service Information ------------------------------------
Chapter 7 -- Specifications -------------------------------------------------------------
Trademark Notices ---------------------------------------------------------------
2
4
6
9
11
16
19
21
23
®
2
Important Safety Instructions
SAFETY POINTS YOU SHOULD KNOW ABOUT YOUR HITACHI SOUND BAR
14. Refer all servicing to qualifi ed service personnel. Servicing is
required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
15. WARNING: To reduce the risk of fi re or electric shock do not
expose this apparatus to rain or moisture.
16. Do not allow the product to output distorted
sound for an extended period of time. It may
cause speaker overheating and fi re.
17. Sudden high volume sound may cause hearing
or speaker damage. Turn sound bar volume
down before connecting other devices.
18. Do not push objects through any opening in this unit,
as they may touch dangerous voltage points that could
result in fi re or electric shock. Never spill or spray any
type of liquid into the unit.
19. Do not connect this unit to AC power using any device other
than the supplied AC adaptor and AC cord. This
could cause fi re, electrical shock, or damage.
20. Do not use with a voltage other than the power voltage
specifi ed. This could cause fi re, electrical shock, or damage.
Connect to 120VAC, 60Hz power only.
21. If you need to replace the supplied AC adapter or AC cord,
contact the dealer from which you purchased the unit.
22. The Mains plug is used as the disconnect device,
and shall remain readily operable.
NOTICE ABOUT SOUND BAR PLACEMENT
Mounting the unit on a cabinet smaller than the length of the
unit could create a tip-over risk resulting in personal injury,
and product damage. Hitachi accepts no responsibility or
liability for any injuries or property damage resulting from
improper installation of this Sound Bar.
POWER SOURCE
This sound bar is designed to operate on 120 volts 60 Hz,
AC current from the supplied AC to DC external power
adapter. To prevent electric shock, do not use the plug with
an extension cord, receptacle, or other outlet unless the
blades and ground terminal can be fully inserted to prevent
blade exposure.
Never connect the AC adapter to 50 Hz, direct current, or
anything other than the specifi ed voltage.
CAUTION NOTICE FOR 32" BASS PORTS
Never insert any object or liquids into the bass ports at each
end of the 32” Sound Bar (model HSB32B26).
Any such foreign object(s) will distort the
sound quality and may permanently
damage your Sound Bar. Such damage
is not covered by this product’s warranty.
Our reputation has been built on the quality, performance,
and ease of service of Hitachi products.
Safety is also foremost in our minds in the design of these
units. To help you operate these products properly, this
section illustrates safety tips which will be of benefi t to you.
Please read it carefully and apply the knowledge you obtain
from it to the proper operation of your Hitachi sound bar.
The lightning fl ash with arrowhead symbol, within
an equilateral triangle, is intended to alert the
user to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that may
be of a suffi cient magnitude to constitute a risk of
electric shock to a person.
The exclamation point within an equilateral triangle,
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
appliance.
READ BEFORE OPERATING EQUIPMENT
Follow all warnings and instructions marked on this Sound
Bar.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth
7. Do not block any ventilation openings. Install in accordance
with the manufacturer’s instructions.
8. Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including amplifi ers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding
type plug. A polarized plug has two blades with one wider than
the other. A grounding type plug has two blades and a third
grounding prong. The wide blade or the third prong are
provided for your safety. If the provided plug does not fi t into
your outlet, consult an electrician for replacement of the
obsolete outlet.
10. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11. Only use attachments/accessories specifi ed
by the manufacturer.
12. Use only with the cart stand, tripod, bracket
or table specifi ed by the manufacturer or sold
with the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to avoid
injury from tip-over.
13. Unplug this apparatus during lightning storms or when
unused for long periods of time.
3
Important Safety Instructions
CANADIAN RSS NOTICE
This device complies with Industry Canada RSS-210.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference, including
interference that may cause undesired operation.
Le présent appareil est conforme aux CNR d’Industrie
Canada applicables aux appareils radio RSS-210.
L’exploitation est autorisée aux deux conditions
suivantes:
(1) l’appareil ne doit pas produire de brouillage, et
(2) l’utilisateur de l’appareil doit accepter tout brouillage
radio électrique subi, si le brouillage est susceptible d’en
compromettre le fonctionnement.
This device meets the exemption from the routine
evaluation limits in section 2.5 of RSS-102 and
compliance with RSS-102 RF exposure, users can obtain
Canadian information on RF exposure and compliance.
Le dispositif rencontre l’exemption des limites courantes
d’évaluation dans la section 2.5 de RSS-102 et la
confirmité á l’exposition de RSS-102 rf, utilisateurs peut
obtenir l’information Canadienne sur l’exposition et la
conformité de rf.
U.S. FEDERAL COMMUNICATIONS
COMMISSION NOTICE
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio
or television reception, which can be determined by
turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the
following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment
and receiver.
— Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV
technician for help.
MODIFICATIONS
FCC regulations state that any changes or modifications
made to this device that are not expressly approved by
Hitachi America, Ltd. may void the user’s authority to
operate the equipment .
CABLES
Connections to this device must be made with shielded
cables with metallic RFI/EMI connector hoods to maintain
compliance with FCC Rules and Regulations.
Any cables or power cords or power adapters supplied
with the system must be replaced with identical parts in
order to assure compliance.
You may order those replacement parts from Hitachi.
DECLARATION OF CONFORMITY
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
For questions regarding this declaration, contact:
Hitachi America, Ltd.
900 Hitachi Way
Chula Vista, CA. 91914
800.448.2244 (800.HITACHI)
ATTN: Customer Relations
LEAD NOTICE
This product contains lead. Dispose of this product in
accordance with applicable environmental laws. For
product recycling and disposal information, contact your
local government agency or www.erecycle.org (in
California), the Electronic Industries Alliance at
www.eiae.org (in the U.S.) or the Electronic Product
Stewardship Canada at www.epsc.ca. (in Canada). For
more information, call 800.HITACHI.
This unit meets
ENERGY STAR for A/V
program requirements.
If no audio input signal has been detected for 30
minutes, this unit automatically powers down to save
you energy.
Press the Power button on the remote control or top
panel to wake the unit.

Specyfikacje produktu

Marka: Hitachi
Kategoria: głośnik
Model: HSB40B16

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Hitachi HSB40B16, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje głośnik Hitachi

Hitachi

Hitachi HSB40B16 Instrukcja

5 Lipca 2024

Instrukcje głośnik

Najnowsze instrukcje dla głośnik

Teufel

Teufel Rockster Air Instrukcja

15 Października 2024
Alpine

Alpine PSS-22WRA Instrukcja

15 Października 2024
Bauhn

Bauhn APPS-0724 Instrukcja

15 Października 2024
Aiwa

Aiwa SP-A100 Instrukcja

15 Października 2024
Harman Kardon

Harman Kardon Citation One Instrukcja

14 Października 2024
Alpine

Alpine 30MC Instrukcja

14 Października 2024
Magnat

Magnat Needle 9000 ALU Instrukcja

14 Października 2024
Pioneer

Pioneer SP-T22A-LR Instrukcja

14 Października 2024
Sharp

Sharp PS-932 Instrukcja

14 Października 2024
Pyle

Pyle PDWR64BTW Instrukcja

13 Października 2024