Instrukcja obsługi Hitachi HILS75205

Hitachi Wsparcie dla płaskich paneli HILS75205

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Hitachi HILS75205 (35 stron) w kategorii Wsparcie dla płaskich paneli. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/35

User Manual

Model:

HILS65205, HILS75205, HI LS86205

Interactive Flat Panel Display

65 86” ”, 75 ,

”

1.1

1.11.1

SAF

SAFSAFETY

ETY

ETYETY

PPRECAUTION

RECAUTION

RECAUTION RECAUTION

Note) The color and design may different by each model and the product specification are subject to

change without notice for performance enhancement.

1.1

1.11.1.1 Power

.1 Power

.1 Power.1 Power

[Warning]

•Do not use damaged power cord, plug nor loose socket. It may cause electric shock or fire.

•Do not connect multiple devices into a single s socket. It may cause fire due to overheating.

•Do not touch with wet hands when remove or plug the power cord to avoid electric shock.

•Insert the power plug into socket firmly. It may cause fire when the connectors are unstable.

•Connect the power cord to a grounded wall socket. There is risk of electric shock or injury.

•Do not bend nor pull the power cord and place heavy objects over the power cord. It may

occur cord damage and this may result in fire.

•Please clean only with dry cloth when the plug pin or socket are dusty. It may cause fire.

[Caution]

•Do not unplug the power plug while the product is operating. It may damage the product

due to electric shock.

•Only a power cord specified by product manufacturer are recommended.

Do not use the power cord from other devices. It may cause electric shock or fire.

•Hold the plug itself when unplugging the power plug from the wall socket. If not, there is

risk of electric shock or fire.

•Before moving or installing this product, be sure to turn off the power and disconnect the

power cord. To turn this product off completely, you must pull the power plug out of the

wall socket. Consequently, the power plug must be easily and readily accessible at all

times.

1.1

1.11.1.2 Insta

.2 Insta

.2 Insta.2 Installation

llation

llation llation

[Warning]

•Do not install near any heat sources such as radiators, or other devices that produce heat.

It may cause electric shock or fire.

•When mounting a product on the wall, make sure not to install the product by hanging the

power and signal cables on the back of it.

•Consult with your local dealer or specialized engineer to mount the product on the wall,

and use the screws and wall mounts that meet the VESA standard. Any damages or

injuries by misuse or using an improper accessory are not covered by the warranty.

•Take care not to touch the ventilation openings. When watching the screen for a long period,

the ventilation openings may become hot. This does not affect the performance of the product

or cause defects in the product.

•Do not install this product on a wall if it could be exposed to oil or oil mist. This may damage

the product and cause it to fall.

•To install batteries in remote control, open the battery cover, replace batteries matching (+)

and (-) ends to the label inside the compartment, and close the battery cover. Failure to

match the correct polarities of the battery may cause the battery to burst or leak, resulting in

fire, personal injury, or ambient pollution.

• To prevent to swallow the small accessories for children, keep the accessories out of the

reach of children.

The product must keep horizontal and upright position when moving. Hold the top and

bottom of the frame firmly. Handles are only for the supporting purpose.

When attaching the stand to the set, place the screen facing down on a cushioned table or

flat surface to protect the screen from scratches by more than 2 people,

Make sure that the screws are fastened tightly. (If they are not fastened securely enough,

it may tilt forward after being installed.)

Specyfikacje produktu

Marka:	Hitachi
Kategoria:	Wsparcie dla płaskich paneli
Model:	HILS75205

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Hitachi HILS75205, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Wsparcie dla płaskich paneli Hitachi

Hitachi HILS86205 Instrukcja

11 Września 2024

Hitachi HILU75202 Instrukcja

1 Września 2024

Hitachi HIT-FHD6516PC Instrukcja

31 Sierpnia 2024

Hitachi HILS65205 Instrukcja

30 Sierpnia 2024

Hitachi HILF75101 Instrukcja

25 Sierpnia 2024

Hitachi HILU86101 Instrukcja

22 Sierpnia 2024

Hitachi HILS75205 Instrukcja

20 Sierpnia 2024

Hitachi HILF65101 Instrukcja

16 Sierpnia 2024

Hitachi HILS55205 Instrukcja

13 Sierpnia 2024

Hitachi =HIT-FHD6500PC Instrukcja

13 Sierpnia 2024

Instrukcje Wsparcie dla płaskich paneli

Najnowsze instrukcje dla Wsparcie dla płaskich paneli

B-tech BT9340-FM Instrukcja

15 Stycznia 2025

StarTech.com ARMPIVOTE2 Instrukcja

15 Stycznia 2025

StarTech.com 3M1A3SG-MONITOR-ARM Instrukcja

15 Stycznia 2025

Vogel's FM1622 Instrukcja

15 Stycznia 2025

NeoMounts DS45-430BL16 Instrukcja

14 Stycznia 2025

NeoMounts DS42-430BL14 Instrukcja

14 Stycznia 2025

NeoMounts NS-WMB300PBLACK Instrukcja

14 Stycznia 2025

StarTech.com MONSTADJD Instrukcja

14 Stycznia 2025

Manhattan 424868 Instrukcja

14 Stycznia 2025

Manhattan 424820 Instrukcja

14 Stycznia 2025