Instrukcja obsługi Hitachi CP-X8160

Hitachi Projektor CP-X8160

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Hitachi CP-X8160 (33 stron) w kategorii Projektor. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/33
1
Projector
CP-X8150/CP-X8160/CP-WX8240
CP-WX8255/CP-SX8350/CP-WU8440
CP-WU8450
User's Manual (detailed)
Instant Stack Guide
Thank you for purchasing this product.
WARNING ►Before using this product, be sure to read all manuals for this
product. After reading them, store them in a safe place for future reference.
►Follow all the instructions in the manuals or on the product. The manufacturer
assumes no responsibility for any damage caused by mishandling that is beyond
normal usage dened in the manuals.
NOTEThe information in this manual is subject to change without notice.
• The manufacturer assumes no responsibility for any errors that may appear in
this manual.
• The reproduction, transfer or copy of all or any part of this document is not
permitted without express written consent.
Trademark acknowledgment
All the trademarks in this manual are the properties of their respective owners.
Various symbols are used in this manual. The meanings of these symbols are
described below.
About this manual
WARNING
CAUTION
NOTICE
This symbol indicates information that, if ignored, could possibly
result in personal injury or even death due to incorrect handling.
This symbol indicates information that, if ignored, could possibly result
in personal injury or physical damage due to incorrect handling.
This entry notices of fear of causing trouble.
Please refer to the pages written following this symbol.
Features
This projector can be used with another projector of the same model to project an
image on the same screen using the Instant Stack feature.
The two projectors can be operated simultaneously to make the image brighter.
Moreover, if you connect two projectors with RS-232C cross-over cable, it turns to
a kind of intellectual stacking system. The two projectors can work alternately by
themselves, and once one projector has an accident the other voluntarily starts to
work to keep your presentation going.
These features, generically called Instant Stack, provide you with the broad use.
2
 
1. Introduction ........................3
1.1 Basic information
and preparations ............................. 3
Instant Stack ........................................ 3
Intellectual Stack and Simple Stack ..... 3
Remote control for Intellectual Stack
and Simple Stack ............................. 3
2. Installation ..........................5
2.1 Preparing for Intellectual Stack..... 5
2.2 Installing
the rst projector (Set ) ................ 6A
Deciding installation position ............... 6
Setting up Set ................................... 6A
2.3 Installing
the second projector (Set ) .......... 8B
Deciding installation position ............... 8
Connecting projectors .......................... 8
Setting up Set ................................... 8B
2.4 Conrming Main
and Sub settings ............................ 10
2.5 Fine adjusting
image position ............................... 11
For Intellectual Stack users ............... 11
For Simple Stack users ...................... 12
3. STACK menu settings ......13
3.1 Displaying STACK menu ............ 13
3.2 Selecting Main, Sub or off .......... 14
3.3 Selecting lamp operation mode .. 15
3.4 Selecting lamp switching mode .. 17
3.5 Selecting input source for Sub.... 18
3.6 Exiting Intellectual
Stack menu ................................... 19
STACK menu ..................................... 19
Dialog from STACK menu .................. 19
3.7 Important information
for Intellectual Stack ...................... 20
4. Connecting cables ...........23
4.1 Connecting an RS-232C cable ... 23
4.2 Connecting signal cables............ 24
Inputting image from Main to Sub ...... 24
Inputting image
to Sub and Main individually ........... 24
5. Setting input ports
using menu .........................25
5.1 Preparing for menu operations ... 25
5.2 Checking Main projector's
operating status ............................. 25
5.3 Starting up Main projector .......... 26
5.4 Setting the menu ........................ 27
Inputting image from Main to Sub
- Computer signal ........................... 27
Inputting image from Main to Sub
- Video signal
(either component or video) ........... 28
Inputting image to
Sub and Main individually ............... 28
6. Restrictions
on Schedule function ........30
7. Troubleshooting ...............32
Contents
3
(continued on next page)
1. Introduction
1.1 Basic information and preparations
Instant Stack
Instant Stack is a feature that allows you to superimpose images projected from
two projectors easily.
Intellectual Stack and Simple Stack
Instant Stack includes the following two features.
When two projectors are connected via an RS-232C cable with necessary set-
tings performed on the projectors, these two projectors will automatically operate
in synchronization with each other according to the settings. This is known as
Intellectual Stack in this manual.
The two projectors operate individually without the RS-232C connection. This is
known as Simple Stack in this manual.
Remote control for Intellectual Stack and Simple Stack
For Intellectual Stack, one projector is set as Main and the other is set as Sub.
Only the Main projector is capable of receiving the remote control signals.
Operate
the projectors from the control panel of the Main projector or with the remote control
pointing at the Main projector. For details on operating by remote control and from the
control panel, refer to 3.7 Important Information for Intellectual Stack.
For Simple Stack, both projectors can receive the remote control signals. To avoid
incorrect operations with the remote control, it is recommended to operate both
projectors with the control panel or a wired remote control, or one projector with
the remote control and the other with the control panel or a wired remote control.
In this case, disable the remote control receiving on the other projector with the
KEY LOCK feature. ( )Operating Guide OPTION menu
CAUTION ► Place the projector in a cool place with sufcient ventilation.
Keep a space of 30 cm or more between a side of the projector and other
objects such as a wall. Keep a space of 100 cm or more between the two
projectors, especially if you are installing the projectors side by side. Take care
not to let the hot exhaust air from other projectors enter the intake vents of the
projector.
WARNING ► Do not place projectors directly on top of other projectors.

Specyfikacje produktu

Marka: Hitachi
Kategoria: Projektor
Model: CP-X8160

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Hitachi CP-X8160, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Projektor Hitachi

Hitachi

Hitachi CP-A352WNM Instrukcja

14 Października 2024
Hitachi

Hitachi CP-X250 Instrukcja

16 Września 2024
Hitachi

Hitachi MP-WU5603 Instrukcja

16 Września 2024
Hitachi

Hitachi CP-RX60Z Instrukcja

16 Września 2024
Hitachi

Hitachi PJ-TX10 Instrukcja

11 Września 2024
Hitachi

Hitachi ED-A100 Instrukcja

9 Września 2024
Hitachi

Hitachi CP-A222WN Instrukcja

7 Września 2024
Hitachi

Hitachi CP-S220W Instrukcja

6 Września 2024
Hitachi

Hitachi CP-DW10N Instrukcja

5 Września 2024

Instrukcje Projektor

Najnowsze instrukcje dla Projektor

Acer

Acer X137WH Instrukcja

14 Października 2024
Barco

Barco Thor Instrukcja

14 Października 2024
NEC

NEC NP-M283X Instrukcja

14 Października 2024
Epson

Epson PowerLite 5520W Instrukcja

13 Października 2024
Epson

Epson EX3220 Instrukcja

12 Października 2024
Acer

Acer X112 Instrukcja

12 Października 2024
3M

3M X36i Instrukcja

11 Października 2024
Optoma

Optoma EP774 Instrukcja

11 Października 2024
Sanyo

Sanyo PLC-8810N Instrukcja

11 Października 2024