Instrukcja obsługi Hitachi CP-WX3042WN

Hitachi Projektor CP-WX3042WN

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Hitachi CP-WX3042WN (20 stron) w kategorii Projektor. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/20
1
ENGLISH
WARNING Before using this product, be sure to read all manuals for this
product. After reading them, store them in a safe place for future reference.
►Heed all the warnings and cautions in the manuals or on the product.
►Follow all the instructions in the manuals or on the product.
First of all ............................................ 2
Entries and graphical symbols explanation ......2
Important safety instruction ..............................2
Regulatory notices .............................. 3
About Electro-Magnetic Interference ................
3
About Waste Electrical and Electronic Equipment
...4
Contents of package........................... 4
Preparing for the remote control ......... 5
Arrangement ....................................... 6
Connecting with your devices ............. 7
Fastening the adapter cover ............... 8
Connecting power supply ................... 9
Turning on the power ........................ 10
Adjusting the projector's elevator ..... 11
Displaying the picture ....................... 12
Turning off the power ........................ 13
Replacing the lamp ........................... 14
Cleaning and replacing the air lter
.. 16
Using the CD manual ....................... 17
Specications ................................... 18
Troubleshooting
- Warranty and after-service ........... 19
Contents
NOTE • In this manual, unless any comments are accompanied, “the
manuals” means all the documents provided with this product, and “the product”
means this projector and all the accessories came with the projector.
LCD Projector
CP-X2542WN/CP-X3042WN/CP-X3542WN/
CP-X4042WN/CP-WX3042WN/CP-WX4042WN
User's Manual (concise)
Thank you for purchasing this projector.
Please read through this manual before using this product, in order to use safely
and utilize well the product.
2
First of all
Entries and graphical symbols explanation
The following entries and graphical symbols are used for the manuals and the
product as follows, for safety purpose. Please know their meanings beforehand,
and heed them.
Important safety instruction
The followings are important instructions for safely using the product. Be sure to
follow them always when handling the product. The manufacturer assumes no
responsibility for any damage caused by mishandling that is beyond normal usage
dened in these manuals of this projector.
WARNING
This entry warns of a risk of serious personal injury or even death.
CAUTION This entry warns of a risk of personal injury or physical damage.
NOTICE This entry notices of fear of causing trouble.
WARNING Never use the product in or after an abnormality (ex. giving
off smoke, smelling strange, took a liquid or an object inside, broken, etc.) If an
abnormality should occur, unplug the projector urgently.
►Situate the product away from children and pets.
►Keep small parts away from children and pets. If swallowed, consult a
physician immediately for emergency treatment.
►Do not use the product when there is fear of a thunderbolt.
►Unplug the projector from the power outlet if the projector is not used for the
time being.
►Do not open or remove any portion of the product, unless the manuals direct
it. For internal maintenance, leave it to your dealer or their service personnel.
►Use only the accessories specied or recommended by the manufacturer.
►Do not modify the projector or accessories.
►Do not let any things or any liquids enter to the inside of the product.
►Do not wet the product.
►Do not place the projector where any oils, such as cooking or machine oil,
are used. Oil may harm the product, resulting in malfunction, or falling from the
mounted position.
►Do not apply a shock or pressure to this product.
- Do not place the product on an unstable place such as the uneven surface or
the leaned table.
- Do not place the product unstably. Place the projector so that it does not
protrude from the surface where the projector is placed on.
- Remove all the attachments including the power cord and cables, from the
projector when carrying the projector.
Do not look into the lens and the openings on the projector, while the lamp is on,
since the projection ray may cause a trouble on your eyes.
Do not approach the lamp cover and the exhaust vents, while the projection lamp
is on. Also after the lamp goes out, do not approach them for a while, since too hot.
3
ENGLISH
Regulatory notices
About Electro-Magnetic Interference
In CANADA
CAN ICES-3(B) / NMB-3(B).
In the US, and other places where the FCC regulations are applicable
Declaration of Conformity
Trade name HITACHI
Model Number
CP-X2542WN/CP-X3042WN/CP-X3542WN/CP-X4042WN
CP-WX3042WN/CP-WX4042WN
Responsible Party Hitachi America, Ltd.
Address
2420 Fenton Street, Suite 200 Chula Vista,CA 91914 U.S.A.
Telephone Number +1 -800-448-2244
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. This equipment
has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
INSTRUCTIONS TO USERS: This equipment complies with the requirements of
FCC (Federal Communication Commission) equipment provided that the following
conditions are met. Some cables have to be used with the core set. Use the
accessory cable or a designated-type cable for the connection. For cables that
have a core only at one end, connect the core to the projector.
CAUTION:
Changes or modications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
As with any bright source, do not
stare into the direct beam, RG2
IEC 62471-5:2015.


Specyfikacje produktu

Marka: Hitachi
Kategoria: Projektor
Model: CP-WX3042WN

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Hitachi CP-WX3042WN, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Projektor Hitachi

Hitachi

Hitachi CP-A352WNM Instrukcja

14 Października 2024
Hitachi

Hitachi CP-WX3042WN Instrukcja

22 Września 2024
Hitachi

Hitachi MP-JU4001 Instrukcja

20 Września 2024
Hitachi

Hitachi CPX380W Instrukcja

17 Września 2024
Hitachi

Hitachi CP-X250 Instrukcja

16 Września 2024
Hitachi

Hitachi MP-WU5603 Instrukcja

16 Września 2024
Hitachi

Hitachi CP-RX60Z Instrukcja

16 Września 2024
Hitachi

Hitachi ED-X50EP Instrukcja

16 Września 2024
Hitachi

Hitachi CP-X2510EN Instrukcja

16 Września 2024
Hitachi

Hitachi CP-X3030WN Instrukcja

15 Września 2024

Instrukcje Projektor

Najnowsze instrukcje dla Projektor

Acer

Acer X137WH Instrukcja

14 Października 2024
Barco

Barco Thor Instrukcja

14 Października 2024
NEC

NEC NP-M283X Instrukcja

14 Października 2024
Epson

Epson PowerLite 5520W Instrukcja

13 Października 2024
Epson

Epson EX3220 Instrukcja

12 Października 2024
Acer

Acer X112 Instrukcja

12 Października 2024
3M

3M X36i Instrukcja

11 Października 2024
Optoma

Optoma EP774 Instrukcja

11 Października 2024
Sanyo

Sanyo PLC-8810N Instrukcja

11 Października 2024