Instrukcja obsługi Hitachi CP-DX301

Hitachi Projektor CP-DX301

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Hitachi CP-DX301 (59 stron) w kategorii Projektor. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/59
Projector
CP-DX301
User Manual
Thank you for purchasing this product.
Please read this manual before you operate your projector.
Save it for future reference.
1
Table of contents
Important safety
instructions .......................2
Introduction......................4
Projector features .................................4
Shipping contents ................................. 5
Projector exterior view......................... 6
Controls and functions ......................... 7
Positioning your
projector..........................10
Choosing a location............................ 10
Projection dimensions ........................11
Connection ......................12
Connecting a computer or monitor .... 13
Connecting Video source devices ...... 14
Operation ........................17
Starting up the projector..................... 17
Using the menus................................. 18
Utilizing the password function ......... 19
Switching input signal........................ 21
Adjusting the projected image ........... 22
Magnifying and searching for details. 23
Selecting the aspect ratio ................... 24
Optimizing the image......................... 26
Setting the presentation timer ............ 29
Hiding the image................................ 30
Locking control keys.......................... 30
Freezing the image............................. 30
Operating in a high altitude
environment ....................................... 31
Shutting down the projector...............31
Menu operation ..................................32
Maintenance ...................41
Care of the projector.......................... 41
Lamp information .............................. 42
Troubleshooting .............47
Specifications ..................48
Projector specifications...................... 48
Dimensions ........................................ 49
........................................................... 49
Timing chart ...................................... 50
Regulation Statements ...54
FCC statement ................................... 54
ICES-003 ........................................... 54
WEEE................................................ 54
Copyright information...56
Warranty and
after-service ....................57
Entries and graphical symbols expla-
nation
The following entries and graphical symbols are
used for the manuals and the product as follows,
for safety purpose. Please know their meanings
beforehand, and heed them.
WARNING: This entry warns of a risk of
serious personal injury or even death.
CAUTION: This entry warns of a risk of
personal injury or physical damage.
2
Important safety instructions
Your projector is designed and tested to meet the latest standards for safety of information
technology equipment. However, to ensure safe use of this product, it is important that you
follow the instructions mentioned in this manual and marked on the product.
Safety Instructions
WARNING
1. Please read this manual before you operate your projector. Save it for future
reference.
2.
3. Refer servicing to qualified service personnel.
4. In some countries, the line voltage is NOT stable. This projector is designed to operate
safely within a mains voltage between 100 to 240 volts AC, but could fail if power
cuts or surges of ±10 volts occur. In areas where the mains voltage may fluctuate
or cut out, it is recommended that you connect your projector through a power
stabilizer, surge protector or uninterruptible power supply (UPS).
5.
6. The lamp becomes extremely hot during operation. Allow the projector to cool for
approximately 45 minutes prior to removing the lamp assembly for replacement.
7. Never replace the lamp assembly or any electronic components unless the projector is
unplugged.
8. Do not place this product on an unstable cart, stand, or table. The product may fall,
sustaining serious damage.
9. Do not attempt to disassemble this projector. There are dangerous high voltages inside
which may cause death if you should come into contact with live parts. The only user
serviceable part is the lamp which has its own removable cover.
Under no circumstances should you ever undo or remove any other covers. Refer
servicing only to suitably qualified professional service personnel.
10. Do not place this projector in any of the following environments.
- Space that is poorly ventilated or confined. Allow at least 50 cm clearance from walls
and free flow of air around the projector.
- Locations where temperatures may become excessively high, such as the inside of a
car with all windows rolled up.
- Locations where excessive humidity, dust, or cigarette smoke may contaminate optical
components, shortening the projector's life span and darkening the picture.
- Locations near fire alarms
- Locations with an ambient temperature above 40°C / 104°F
- Locations where the altitudes are higher than 3050 m (10007 feet).
11. Do not block the ventilation holes. Otherwise the components inside the projector will
become overheated and result in a fire or malfunction. In addition, do not place the
projector in locations near an air conditioner, fan or dryer because direct contact with
constant heat or warm air may cause deformation to the outer casing of the projector.
Do not look straight at the projector lens during operation. The intense
light beam may damage your eyes.
Do not block the projection lens with any objects when the projector is
under operation as this could cause the objects to become heated and
deformed or even cause a fire. To temporarily turn off the display, press
BLANK on the remote control.


Specyfikacje produktu

Marka: Hitachi
Kategoria: Projektor
Model: CP-DX301

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Hitachi CP-DX301, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Projektor Hitachi

Hitachi

Hitachi CP-X4011N Instrukcja

12 Stycznia 2025
Hitachi

Hitachi CP-A352WNM Instrukcja

14 Października 2024
Hitachi

Hitachi CP-WX3042WN Instrukcja

22 Września 2024
Hitachi

Hitachi MP-JU4001 Instrukcja

20 Września 2024
Hitachi

Hitachi CPX380W Instrukcja

17 Września 2024
Hitachi

Hitachi CP-X250 Instrukcja

16 Września 2024
Hitachi

Hitachi MP-WU5603 Instrukcja

16 Września 2024
Hitachi

Hitachi CP-RX60Z Instrukcja

16 Września 2024
Hitachi

Hitachi ED-X50EP Instrukcja

16 Września 2024
Hitachi

Hitachi CP-X2510EN Instrukcja

16 Września 2024

Instrukcje Projektor

Najnowsze instrukcje dla Projektor

Acer

Acer X1329 Instrukcja

15 Stycznia 2025
Acer

Acer P1165P Instrukcja

13 Stycznia 2025
NEC

NEC NC2043ML Instrukcja

12 Stycznia 2025
Viewsonic

Viewsonic V149-4K Instrukcja

11 Stycznia 2025
Acer

Acer AX600 Instrukcja

9 Stycznia 2025
Acer

Acer Q59X Instrukcja

9 Stycznia 2025