Instrukcja obsługi Heritage Audio RAM System 5000

Heritage Audio Kontroler RAM System 5000

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Heritage Audio RAM System 5000 (16 stron) w kategorii Kontroler. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/16
1
RAM SYSTEM 5000 USER MANUAL
Feb. 19 th, 2018
Rev. 1.0, Firmware version V19
2
INSTALLING THE RAM SYSTEM 5000
Thanks for purchasing the RAM System 5000. Please make sure the following
items are in the box when you open it.
• This manual.
• RAM System 5000 main unit.
• RAM System 5000 remote unit.
• Power Supply labelled HA- .PSU02
• 3x Bluetooth antenna.
• IEC Cable.
• USB cable.
Depending on your system requirements, you will need several XLR, RCA,
DSUB snakes and digital cables to hook up your system. Please check your
input sources and output destinations and get yourself the correct cables.
Additionally, please insert the s in theirwireless antenna s threaded connector
in case they come unplugged from the factory.
The power supply is of the auto switching universal type so it works
worldwide without anything. In case your country uses a different adjusting
mains cable other than the one provided in the box, just get the correct one
and you are done.
The remote unit is operated by means of an internal rechargeable battery,
similar to that found in your mobile phone. A charging dock comes included
in the main unit, as is the USB cable. A red LED on the back of the remote unit
will light when being charged and the unit can be fully operated while in
charge mode. It is recommended to completely charge the battery on its first
use.
Please turn on the main unit and the remote unit thereafter. A “Connecting”
message will display and, if connection is successful, a message will display
shortly thereafter.
3
Plugging the unit will display a welcome message and firmware unit´s
version. Please note that after turning on the unit, MUTE will always be
engaged regardless of the level shown on the red knob. This is to prevent
damage of your speakers due to excessive level on startup.
Any connection problems, the remote will show the message “NO CONSOLE”
and will try to reconnect again. It is normal to have this message for a few
seconds when turning on, no worries.
Any time you plug the unit on, the status of the RAM System will be that of
the last time it was stored, so there is no need to reset preset levels or
talkback gain. Last input and output chosen is also stored.
In order to save your preferred status, press SHIFT + OUT4 (SAVE STATUS)
GENERAL DESCRIPTION
The Heritage Audio RAM SYSTEM 5000 is a professional 5.1 ready monitor
controller in a convenient split format. With its matrix of inputs and outputs,
covering balanced and unbalanced analog, all digital formats common on a
state of the art Wolfson DAC, and the innovative professional quality HA
Bluetooth technology, the System 5000 will cover all the monitoring needs of
the most demanding professional facilities at a price never heard before.
The level control is taken care of by means of microprocessor controlled gold
plated relays, giving an exceptional resolution of 64dB of attenuation in 1dB
steps. Keeping active electronics to a minimum, the attenuator is buffered
using premium Burr Brown circuitry for negligible coloration and no noise.
Headphone monitoring is as critical as main speaker is. Usually a weak part
even in the most expensive units, the RAM System 5000 employs very high
current drivers in a diamond buffer configuration which are able to drive any
headphones to very high It has 2 amplilevels without coloration or noise. fiers

Specyfikacje produktu

Marka: Heritage Audio
Kategoria: Kontroler
Model: RAM System 5000

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Heritage Audio RAM System 5000, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Kontroler Heritage Audio

Heritage Audio

Heritage Audio RAM System 2000 Instrukcja

29 Września 2024
Heritage Audio

Heritage Audio RAM System 5000 Instrukcja

29 Września 2024

Instrukcje Kontroler

Najnowsze instrukcje dla Kontroler

Turtle Beach

Turtle Beach Recon Instrukcja

27 Marca 2025
Metronic

Metronic Zap 3 495383 Instrukcja

26 Marca 2025
PowerA

PowerA Enhanced Wireless Controller Instrukcja

26 Lutego 2025
Nyko

Nyko Sound Pad Instrukcja

25 Lutego 2025
Nyko

Nyko Air Glow 87303 Instrukcja

25 Lutego 2025
Nyko

Nyko 87270 Instrukcja

25 Lutego 2025
IPEGA

IPEGA PG-9078 Instrukcja

20 Lutego 2025
Showtec

Showtec AirDrive 2.4 Pocket Instrukcja

20 Lutego 2025
Axis

Axis TA4201 Instrukcja

20 Lutego 2025
Speed-Link

Speed-Link Black Bolt SL-650300-BK Instrukcja

20 Lutego 2025