Instrukcja obsługi Havis DS-GTC-802-3


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Havis DS-GTC-802-3 (12 stron) w kategorii podstawa/stacja dokująca. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/12
Owner’s Manual
Havis Docking Station
For Getac A140 Rugged Tablet
www.havis.com
1-800-524-9900
DS-GTC-801
DS-GTC-801-3
DS-GTC-802
DS-GTC-802-3
DS-GTC-803
DS-GTC-803-3
DS-GTC-806
DS-GTC-806-3
DS-GTC-800 Series
DS-GTC-801
DS-GTC-801-3
DS-GTC-802
DS-GTC-802-3
DS-GTC-803
DS-GTC-803-3
DS-GTC-806
DS-GTC-806-3
Before Beginning (Original Instructions)
2
Havis is pleased to provide this Owner’s Manual to aid in the proper
installation and use of the DS-GTC-800 Series Docking Station for
the Getac A140 Rugged Tablet.
For questions regarding the set-up of your DS-GTC-800 Series Docking Station,
please contact Havis at 1-800-524-9900 or visit www.havis.com for additional
product support and information.
This Owner’s Manual applies to the following Part Numbers:
• NEVER STOW OR MOUNT THE DOCKING STATION DIRECTLY IN A VEHICLE
AIRBAG DEPLOYMENT ZONE.
• DO NOT USE COMPUTER WHILE DRIVING.
• FOR DOCKING STATION MODELS EQUIPPED WITH A BUNDLED POWER SUPPLY
(DS-GTC-802/802-3, DS-GTC-806/806-3), REFER TO THE SUPPLIED GETAC POWER SUPPLY
REFERENCE GUIDE.
• WHEN TABLET IS DOCKED, THE BATTERY WILL ONLY CHARGE BETWEEN
0°C to 60°C (32°F to 140°F).
PLEASE REFER TO GETAC A140 OWNER’S MANUAL FOR MORE INFORMATION.
Related Products
• READ ALL INSTRUCTIONS THOROUGHLY BEFORE BEGINNING INSTALLATION.
• DO NOT STORE, INSTALL, OR OPERATE THE DOCKING STATION WHERE WATER, MOISTURE,
STEAM, DUST, ETC. ARE PRESENT
• DO NOT DOCK OR UNDOCK YOUR COMPUTER UNLESS IT IS POWERED OFF. DOCKING OR
UNDOCKING WITH YOUR COMPUTER IN ON, STANDBY, HIBERNATION, OR SLEEP MODES
CAN CAUSE PERMANENT DAMAGE.
• FOR THE DS-GTC-801, DS-GTC-801-3, DS-GTC-802 & DS-GTC-802-3 DOCKING STATIONS:
DO NOT CONNECT DIRECTLY TO VEHICLE VOLTAGE SOURCE: This product requires
a certied, automotive grade, Getac approved 120W power source rated for a
continuous, regulated 19VDC output (Havis Part Number LPS-140 or equivalent).
Failure to comply with this requirement will cause product damage that is NOT
repairable and is NOT covered under warranty.
• FOR THE DS-GTC-803, DS-GTC-803-3, DS-GTC-806 & DS-GTC-806-3 DOCKING STATION:
DO NOT CONNECT DIRECTLY TO VEHICLE VOLTAGE SOURCE: The Getac A140 tablet
requires a certied, Getac approved power source rated for a continuous, regulated
19VDC output. Failure to comply with this requirement will cause product damage
that is NOT repairable and is NOT covered under warranty.
Table of Contents
3
Specications
Parts Included
Port Replication Capability
Antenna Identication
Installation & Cable Management
Operation - Docking
Operation - Undocking
3
4
5
5
6
8
10
Do not place metal objects or containers of liquid on top of the Docking Station
If a malfunction occurs, immediately unplug the Power Supply and remove the tablet
Use only the specied Power Supply with this Tablet(Part # LPS-140)
Do not connect cables into ports other than what they are specied for
Do not leave the Docking Station in a high temperature environment (greater than 71°C, 160°F)
for a long period of time
Precautions
Specications
Power Supply Input 19 V DC-In
Dimensions 11.5” ( 29.2 cm) H x 12.2” ( 31.0 cm ) W x 3.2” ( 8.1 cm ) D
Weight 5.6 lbs ( 2.5 kg )
Operating Environment -21° C to 60° C ( -6° F to 140°F )
Storage Environment -51° C to 71° C ( -60° F to 160° F )
FCC 47CFR, Part 15 compliance: This is an FCC Class B device. Any changes or modications
to the model DS-GTC-80X not expressly approved by Havis, Inc. could void
the user's authority to operate this equipment.
EC DECLARATION OF CONFORMITY
Manufacturers Name: Havis, Inc.
Manufacturers Address: 75 Jacksonville Road, Warminster, PA 18974 USA
This declaration of conformity is issued under the sole responsibility of the manufacturer.
Product name: Tablet Docking Station
Model: DS-GTC-80x, where ‘x’ may be any alphanumeric character and which describes product options.
(Object of Declaration) May be followed by any alphanumeric characters which describe product options.
Product Options: This declaration covers all options of the above product which bear the CE Marking.
Is in conformity with the following directives, standards, or other normative documents:
EMC Directive 2014/30/EU EN 55022::2010/AC:2011
EN 55024:2010
RoHS Directive 2011/65/EU EN 50581:2012
The object of the declaration described above is in conformity with Directive 2011/65/EU of the European Parliament and of the
Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
Supplementary Information:
The object of the declaration described above is in conformity with the relevant Union harmonisation legislation.
Signed for and on behalf of Havis, Inc.:
Warminster, PA, USA July 10, 2017 Bruce Jonik, Director of Engineering , Havis, Inc.


Specyfikacje produktu

Marka: Havis
Kategoria: podstawa/stacja dokująca
Model: DS-GTC-802-3
Kolor produktu: Czarny
Rodzaj zasilania: DC
Wysokość produktu: 292 mm
Szerokość produktu: 310 mm
Głębokość produktu: 81 mm
Waga produktu: 2404 g
Certyfikat środowiskowy (zrównoważonego rozwoju): RoHS
Bluetooth: Nie
Certyfikaty: MIL-STD 810G 514.5\nSAE J1455
Rodzaj wtyku anteny: SMA
Ilość portów Ethernet LAN (RJ-45): 1
Liczba portów USB 2.0: 3
Przewodowa sieć LAN: Tak
Waga wraz z opakowaniem: 3629 g
Ilość portów USB 3.2 Gen 1 (3.1 Gen 1) Typu-A: 1
Adapter zewnętrznego zasilania: Tak
Hub USB: Tak
Przewodnik użytkownika: Tak
HDMI: Tak
Wejście audio: 3,5 mm
Kompatybilność: A140
Kompatybilność marki: Getac
Rodzaj złącza HDMI: Pełnorozmiarowy
Wyjście audio: 3,5 mm
Adapter dołączony: Tak
Typ złącza dokowania: Getac 24-pin
Liczba złączy anteny: 3
Podstawowy typ urządzenia: Tablet
Typ złącza DIN: 9-pin
Złącze DIN: Tak

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Havis DS-GTC-802-3, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje podstawa/stacja dokująca Havis

Instrukcje podstawa/stacja dokująca

Najnowsze instrukcje dla podstawa/stacja dokująca