Instrukcja obsługi Havis DS-DELL-604-2

Havis podstawa/stacja dokująca DS-DELL-604-2

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Havis DS-DELL-604-2 (12 stron) w kategorii podstawa/stacja dokująca. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/12

Owner’s Manual

Havis Docking Station for

Dell Latitude Rugged 12 Tablet

www.havis.com

1-800-524-9900

DS-DELL-601

DS-DELL-601-2

DS-DELL-602

DS-DELL-602-2

DS-DELL-603

DS-DELL-603-2

DS-DELL-604

DS-DELL-604-2

DS-DELL-600 Series

Before Beginning (Original Instructions)

• NEVER STOW OR MOUNT THE DOCKING STATION DIRECTLY IN A VEHICLE

AIRBAG DEPLOYMENT ZONE.

• DO NOT USE COMPUTER WHILE DRIVING.

Havis is pleased to provide this Owner’s Manual to aid in the proper

installation and use of the DS-DELL-600 Series Docking Station for

Dell Latitude Rugged 12 Tablet

For questions regarding the set-up of your DS-DELL-600 Series Docking Station,

please contact Havis at 1-800-524-9900 or visit www.havis.com for additional

product support and information.

DS-DELL-601

DS-DELL-601-2

DS-DELL-602

DS-DELL-602-2

DS-DELL-603

DS-DELL-603-2

DS-DELL-604

DS-DELL-604-2

This Owner’s Manual applies to the following Part Numbers:

• FOR DOCKING STATION MODELS EQUIPPED WITH A BUNDLED POWER SUPPLY

(DS-DELL-602, DS-DELL-602-2) REFER TO THE SUPPLIED LIND POWER SUPPLY REFERENCE GUIDE.

• READ ALL INSTRUCTIONS THOROUGHLY BEFORE BEGINNING INSTALLATION.

• FOR THE DS-DELL-601, DS-DELL-601-2, DS-DELL-602, DS-DELL-602-2 DOCKING STATIONS:

DO NOT CONNECT DIRECTLY TO VEHICLE VOLTAGE SOURCE: This product requires a certied,

automotive grade, Dell approved 90W power source rated for a continuous, regulated

19.5VDC output (Havis Part Number LPS-131 or equivalent). Failure to comply with this

requirement will cause product damage that is NOT repairable and is NOT covered under warranty.

• THE DS-DELL-604, DS-DELL-604-2 DOCKING STATIONS MUST BE USED WITH POWER CABLE

SHIPPPED WITH DOCKING STATION (PART # DS-DA-316). THIS CABLE INCLUDES A 15AMP

PROTECTION FUSE.

EC DECLARATION OF CONFORMITY in accordance with EN 50498

Manufacturers Name: Havis, Inc.

Manufacturers Address: 47099 Five Mile Road, Plymouth Twp, MI 48170 USA

Declares under our sole responsibility that the product:

Product name: Havis Docking Station For Dell Latitude Rugged 12 Tablet

Model: DS-DELL-60X, where ‘X’ may be any alphanumeric character and which describes product options.

May be followed by any alphanumeric characters which describe product options.

Product Options: This declaration covers all options of the above product which bear the CE Marking.

Is in conformity with the following standards or other normative documents:

Automotive EMC Directive EN 50498:2010, Electromagnetic compatibility (EMC) -

2004/108/EC: Product family standard for aftermarket electronic equipment in vehicles

Directive 2011/65/EU Restriction of the use of certain hazardous substances (RoHS)

Supplementary Information:

The product herewith complies with the requirements of the Automotive EMC Directive 2004/108/EC, Annex I, 6.5, 6.6, 6.8, and 6.9.

This product requires the use of a recommended e-Marked automotive power supply when used within vehicles.

Plymouth twp, MI, USA August 13, 2015 Bruce Jonik, Director of Engineering , Havis, Inc.

FCC 47CFR, Part 15 compliance: This is an FCC Class B device. Any changes or modications

to the model DS-DELL-60X not expressly approved by Havis, Inc. could void

the user's authority to operate this equipment.

Related Products

• Do not place metal objects or containers of liquid on top of the Docking Station

• If a malfunction occurs, immediately unplug the Power Supply and remove the laptop

• Use only the specied Power Supply (Part # LPS-131) with this Docking Station,

or Internal Power Supply cable (Part # DS-DA-316) with Internal Power Supply Docking Stations.

• Do not store the Docking Station where water, moisture, steam, dust, etc. are present

• Do not connect cables into ports other than what they are specied for

• Do not leave the Docking Station in a high temperature environment (greater than 85°C, 185°F)

for a long period of time

Precautions

Table of Contents

Specications

Parts Included

Port Replication Capability

Antenna Identication

Installation and Cable Management

Operation - Docking

Operation - Undocking

Specications

Power Supply Input 19.5V DC-In

Dimensions 14.1” ( 35.8 cm) H x 13.7” ( 34.8 cm ) W x 3.0” ( 7.6 cm ) D

Weight 4.88 lbs ( 2.21 kg )

Operating Environment 0° C to 50° C ( 32° F to 122°F )

Storage Environment -40° C to 85° C ( -40° F to 185° F )

This Hardware Kit includes:

1. Zip Ties (5)

2. Keys (2)

3. 1/4”-20 x 5/8” long

Button Head Screws (5)

4. 1/4”-20 x 3/8” long

Pan Head Screws (5)

Tools required for installation:

• #3 Phillips

(For attaching Mounting Bracket to Docking Station with Pan Head 1/4”-20 Screws)

• 5/32” Hex Drive

(For attaching Mounting Bracket to Motion Device with Button Head 1/4”-20 Screws)

Parts Included

Hardware Kit (HWK-0036)

Specyfikacje produktu

Marka:	Havis
Kategoria:	podstawa/stacja dokująca
Model:	DS-DELL-604-2
Kolor produktu:	Czarny
Rodzaj zasilania:	DC
Wysokość produktu:	358 mm
Szerokość produktu:	348 mm
Głębokość produktu:	76 mm
Waga produktu:	2210 g
Bluetooth:	Nie
Ilość:	1
Ilość portów Ethernet LAN (RJ-45):	1
Liczba portów USB 2.0:	1
Ilość portów USB 3.2 Gen 1 (3.1 Gen 1) Typu-A:	2
Ilość DisplayPort:	1
Liczba portów VGA (D-Sub):	3
Wejście audio:	Tak
Kompatybilność:	Latitude 12
Kompatybilność marki:	DELL
Wyjście audio:	Tak
Podstawowy typ urządzenia:	Tablet