Instrukcja obsługi Havis DS-DA-420

Havis nieskategoryzowany DS-DA-420

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Havis DS-DA-420 (1 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/1

ADJUSTMENT PIN: PULL OUT TO

ADJUST DISPLAY VIEWING ANGLE

DS-PAN-1100 SERIES

DOCKING STATION

(NOT INCLUDED)

DETAIL B

(CLOSED)

SCALE 1 : 1

DETAIL A

(OPEN)

SCALE 1 : 1

HARDWARE KIT CONTENTS

ITEM #

DESCRIPTION

QTY.

FINISH

DRIVE STYLE/SIZE

MACHINE SCREW, PAN HEAD, 1/4"-20 x 1/2" LONG

WITH PATCH

PH3

PRODUCT I.D.

DATE

WEIGHT: (LBS)

SCREEN SUPPORT

DS-PAN-1100 SERIES

09/18/17

PRODUCT I.D.

DATE

WEIGHT: (LBS)

DS-DA-420_INST_9-17

PRODUCT DESCRIPTION

THIS PRODUCT SUPPLIES SUPPORT FOR THE

SCREEN OF THE COMPUTER WHEN DOCKED.

PRODUCT I.D.

DATE

WEIGHT: (LBS)

PRODUCT NAME

REV. DATE

DRAWING NUMBER:

DS-DA-420

INSTALLATION INSTRUCTIONS:

NOTE:

- Docking station depicted may not match identically to

product purchased. However, all installation

instructions are still applicable unless otherwise noted.

TO INSTALL SCREEN SUPPORT, FIRST REMOVE

THE SCREWS THAT FASTEN THE LH SIDE OF THE

MOUNTING BRACKET TO THE DS-PAN-1100

DOCKING STATION.

INSTALL 2X 1/4"- 20 x 1/2" PHMS THROUGH THE

LOWER SCREEN SUPPORT BRACKET, THEN

THROUGH THE MOUNTING BRACKET AND INTO

DOCK. TORQUE FASTENERS TO 80 IN-LBS

10%.

NOTE:

- When a pre-applied thread-locking patch is not

present on hardware, it is recommended to apply a

drop of medium strength (blue) thread locking

adhesive to the threads of the hardware prior to

assembly.

DOCK COMPUTER IN DOCKING STATION.

OPEN DISPLAY LATCH (DETAIL A).

OPEN SCREEN TO MEET THE STOP BUMPER.

PRESS SLIGHTLY ON TOP-LEFT CORNER OF

SCREEN WHILE CLOSING LATCH OF SCREEN

SUPPORT OVER SIDE OF SCREEN HOUSING

(DETAIL B).

WHILE PULLING ON KNOB OF ADJUSTMENT PIN,

ADJUST ARM OF SCREEN SUPPORT WITH SCREEN

TO DESIRED SETTING.

NOTE:

The screen support latch should be in the OPEN

position when the laptop screen is closed (DETAIL A).

WARNING: ALL HAVIS INC. PRODUCTS ARE DESIGNED WITH SAFETY OF USE AND INSTALLATION IN MIND. HOWEVER,

IT IS THE SOLE RESPONSIBILITY OF THE OWNER/OPERATOR OF A VEHICLE USING HAVIS INC. MOUNTING AND

DOCKING EQUIPMENT, TO INSURE THAT THE EQUIPMENT IS INSTALLED SO THAT IT WILL NOT INTERFERE WITH VEHICLE

OPERATION, INTERFERE WITH SAFETY DEVICES, OBSTRUCT VIEW OF DRIVING CONDITIONS, OR IN ANY WAY

DEGRADE OCCUPANT SAFETY. IMPROPER INSTALLATION CAN CAUSE SERIOUS INJURY IN THE EVENT OF AN

ACCIDENT. INSTALLATION SHOULD ONLY BE PERFORMED BY QUALIFIED PROFESSIONALS. COMPUTERS AND

MOTION DEVICES MUST BE MOVED TO AND STOWED/SECURED IN THEIR SAFE DRIVING POSITIONS BEFORE

OPERATING VEHICLE.

WWW.HAVIS.COM

1-800-524-9900

F-730-019 REV A

Specyfikacje produktu

Marka:	Havis
Kategoria:	nieskategoryzowany
Model:	DS-DA-420
Kolor produktu:	Czarny
Typ produktu:	Wkładka zapasowa
Waga produktu:	453 g
Kompatybilność:	TOUGHBOOK 33
Kompatybilność marki:	Panasonic