Instrukcja obsługi Hanwha QNB-6002

Hanwha kamera bezpieczeństwa QNB-6002

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Hanwha QNB-6002 (34 stron) w kategorii kamera bezpieczeństwa. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/34

NETWORK CAMERA

User Manual

QNB-6002/QNB-8002

Trademark

Each of trademarks herein is registered. The name of this product and other trademarks mentioned in this manual are the registered trademark of their

respective company.

Restriction

Copyright of this document is reserved. Under no circumstances, this document shall be reproduced, distributed or changed, partially or wholly, without

formal authorization.

Disclaimer

Hanwha Techwin makes the best to verify the integrity and correctness of the contents in this document, but no formal guarantee shall be

provided. Use of this document and the subsequent results shall be entirely on the user’s own responsibility. Hanwha Techwin reserves the

right to change the contents of this document without prior notice.

Design and specications are subject to change without prior notice.

The initial administrator ID is “admin” and the password should be set when logging in for the rst time.

Please change your password every three months to safely protect personal information and to prevent the damage of the information

theft.

Please, take note that it’s a user’s responsibility for the security and any other problems caused by mismanaging a password.

Network Camera

User Manual

English _3

●●OVERVIEW

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean the contaminated area on the product surface with a soft, dry cloth or a damp cloth.

(Do not use a detergent or cosmetic products that contain alcohol, solvents or surfactants or oil constituents

as they may deform or cause damage to the product.)

7. Do not block any ventilation openings, Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including

amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades

with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide

blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult

an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and

the point where they exit from the apparatus.

11. Only use attachments/ accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer,

or sold with the apparatus. When a cart is used, use caution when moving the cart/

apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lighting storms or when unused for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus

has been damaged in any way, such as power-supply cord or plug is damaged, liquid has

been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture,

does not operate normally, or has been dropped.

15. This product is intended to be supplied by a Listed Power Supply Unit marked “Class 2” or “LPS” and rated

from 12 Vdc, 0.5A or PoE, 0.13A. (QNB-6002)

16. This product is intended to be supplied by a Listed Power Supply Unit marked “Class 2” or “LPS” and rated

from 12 Vdc, 0.5A or PoE, 0.13A. (QNB-8002)

17. This product is intended to be supplied by isolation power.

18. If you use excessive force when installing the product, the camera may be damaged and malfunction.

If you forcibly install the product using non-compliant tools, the product may be damaged.

19. Do not install the product in a place where chemical substances or oil mist exists or may be generated. As

edible oils such as soybean oil may damage or warp the product, do not install the product in the kitchen or

near the kitchen table.

This may cause damage to the product.

20. When installing the product, be careful not to allow the surface of the product to be stained with chemical

substance.

Some chemical solvents such as cleaner or adhesives may cause serious damage to the product’s surface.

21. If you install/disassemble the product in a manner that has not been recommended, the production functions/

performance may not be guaranteed.

Install the product by referring to “Installation & connection” in the user manual.

22. Installing or using the product in water can cause serious damage to the product.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT

TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH THE

VENTILATION GRILLS OR OTHER OPENNINGS ON THE EQUIPMENT.

Apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids,

such as vases, shall be placed on the apparatus.

To prevent injury, this apparatus must be securely attached to the Wall/ceiling in accordance

with the installation instructions.

CAUTION

RISK OF ELECTRIC SHOCK.

DO NOT OPEN

CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK.

DO NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

EXPLANATION OF GRAPHICAL SYMBOLS

The lightning flash with arrowhead symbol, within an equilateral triangle, is

intended to alert the user to the presence of “dangerous voltage” within the

product’s enclosure that may be of sufficient magnitude to constitute a risk of

electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to

the presence of important operating and maintenance (servicing) instructions in

the literature accompanying the product.

overview

Specyfikacje produktu

Marka:	Hanwha
Kategoria:	kamera bezpieczeństwa
Model:	QNB-6002
Kolor produktu:	Black, Ivory
Rodzaj zasilania:	DC, PoE
Materiał obudowy:	Plastik
Wysokość produktu:	66.6 mm
Szerokość produktu:	73.8 mm
Głębokość produktu:	136.2 mm
Waga produktu:	320 g
Certyfikat środowiskowy (zrównoważonego rozwoju):	RoHS
Technologia łączności:	Przewodowa
Bluetooth:	Nie
Certyfikaty:	CE\nEMC : EN 55032:2012/AC:2013; EN 50130-4:2011\nRoHS : EN 50581:2012
Maksymalne zużycie mocy:	5.8 W
Liczba kamer:	1
Formaty kompresji:	H.264, H.265, M-JPEG
Obsługiwane systemy operacyjne Windows:	Windows 10, Windows 7, Windows 8.1
Obsługiwane systemy operacyjne Mac:	Mac OS X 10.12 Sierra, Mac OS X 10.13 High Sierra, Mac OS X 10.14 Mojave
Obsługiwane typy kart pamięci:	MicroSD (TransFlash), MicroSDHC, MicroSDXC
Maksymalny rozmiar karty pamięci:	128 GB
Wielkość pamięci flash:	256 MB
Pojemność pamięci wewnętrznej:	1024 MB
Standardy komunikacyjne:	IEEE 802.1x, IEEE 802.3af
Ilość portów Ethernet LAN (RJ-45):	1
Zakres temperatur (eksploatacja):	-10 - 55 °C
Zakres wilgotności względnej:	0 - 90 %
Zarządzanie przez stronę www:	Tak
Układ:	Pudełko
Wi-Fi:	Nie
Obsługiwane formaty audio:	ADPCM
Kanały wyjścia audio:	1 kan.
Przewodowa sieć LAN:	Tak
Zintegrowany czytnik kart:	Tak
Pobór mocy:	4.1 W
Szyfrowanie / bezpieczeństwo:	EAP-LEAP, EAP-TLS
Zakres temperatur (przechowywanie):	-30 - 60 °C
Dopuszczalna wilgotność względna:	0 - 90 %
Model:	Kamera bezpieczeństwa IP
Obsługa jakość serwisu (QoS):	Tak
Maks. rozdzielczość:	1920 x 1080 px
Rodzaj interfejsu sieci Ethernet:	Fast Ethernet
Typ mocowania:	Sufit / Ściana
Przycisk reset:	Tak
Obsługiwane protokoły sieciowe:	IPv4, IPv6, TCP/IP, UDP/IP, RTP(UDP), RTP(TCP), RTCP, RTSP, NTP, HTTP, HTTPS, SSL/TLS, DHCP, FTP, SMTP, ICMP, IGMP, SNMPv1/v2c/v3(MIB-2), ARP, DNS, DDNS, QoS, UPnP, Bonjour, LLDP
Kodeki glosu:	G.711, G.711ulaw, G.726
Obsługiwane rozdzielczości grafiki:	320 x 240,640 x 360,640 x 480 (VGA),720 x 480,720 x 576,800 x 448,800 x 600 (SVGA),1024 x 768 (XGA),1280 x 1024 (SXGA),1280 x 720 (HD 720),1280 x 960,1920 x 1080 (HD 1080)
Zespolony sygnał wizji:	1
Redukcja hałasu:	Tak
Typ przetwornika obrazu:	CMOS
Suma megapikseli:	2 MP
Balans bieli:	ATW, AWC, Indoor, Manual, Outdoor
Typ migawki aparatu:	Elektroniczny
Tryb dzienny / nocny:	Tak
Min. Oświetlenie:	0.01 lx
Ostrość:	Ręczny
Wbudowany HDD:	Nie
Filtrowanie adresów IP:	Tak
Wielkość czujnika CCD:	1/2.8 "
Maksymalna przesłona:	1.2
Video detektor ruchu:	Tak
Rodzaj powiadomienia:	Mail
Ilość klatek:	30 fps
Szybkość migawki:	1/5-1/12000 s
Częstotliwość próbkowania:	8 kHz
Inkrypcja HTTS:	Tak
Wide Dynamic Range (WDR):	Tak
Liczba czujników:	1
Wyjście prądu stałego (w woltach):	12
Kompensacja oświetlenia tylnego:	Tak
Obracanie obrazu i odbicie lustrzane:	Tak
Transmisja wideo:	Tak
Liczba soczewek:	1
Kontrola pochylenia kamery:	Nie
Aktywny alarm włamania:	Tak
Maska prywatności:	Tak
WE/WY alarmu:	Tak
Przeglądarka internetowa:	Tak
Zużycie prądu (przesył prądu przez Ethernet (PoE)):	6.4 W
Kanały wejściowe audio:	1 kan.
Kontrola panewki kamery:	Nie
Przeciwdoblaskowy:	Tak
Porty RS-485:	1
Analityczna inteligencja wideo:	Tak