Instrukcja obsługi Hammond XLK-5
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Hammond XLK-5 (16 stron) w kategorii organ. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/16
Model:
OwnerʼsManual
Congratulations on your purchase of a new Hammond instrument.
e XLK-5 is intended to be used as a Lower Keyboard for the model
XK-5 Drawbar Keyboard.
Please take a moment to review this manual thoroughly in order to famil-
iarize yourself with the features of this keyboard as well as the installation
procedures. Keep this manual for future reference.
English
日本語
Open Here
Page 9
Owner’s Manual
2
Do not open (or modify in any way) the unit.
Do not attempt to repair the unit, or replace parts in
it. Refer all servicing to your retailer, the nearest Ham-
mond Dealer, or an authorized Hammond distributor,
as listed on the “Service” page.
Never use or store the unit in places that are:
Subject to temperature extremes (e.g., direct sun-
light in an enclosed vehicle, near a heating duct, on
top of heat generating equipment)
Damp (e.g., baths, washrooms, on wet oors)
Humid
Exposed to rain
Dusty
Subject to high levels of vibration
Use only with the cart, stand, tripod, bracket, or table
speci ed by the manufacturer, or sold with the appara-
tus. When cart is used: use caution when moving the
cart/apparatus combination to avoid injury from tip-
over.
Do not allow any objects (e.g., ammable material,
coins, pins); or liquids of any kind (water, soft drinks,
etc.) to penetrate the unit.
Immediately turn the power o , remove the AC cable
from the outlet, and request servicing by your retailer,
the nearest Hammond Dealer, or an authorized Ham-
mond distributor, as listed on the “Service” page when:
e AC adaptor, the power-supply cord, or the plug
has been damaged; or
If smoke or unusual odor occurs
Objects have fallen into, or liquid has been spilled
onto the unit; or
e unit has been exposed to rain (or otherwise has
become wet); or
e unit does not appear to operate normally or ex-
hibits a marked change in performance.
In households with small children, an adult should pro-
vide supervision until the child is capable of following
all the rules essential for the safe operation of the unit.
Protect the unit from strong impact. (Do not drop it!)
Never climb on top of, nor place heavy objects on the
unit.
Before moving the unit, disconnect the AC adaptor and
all cords coming from external devices.
Be sure to grasp the plug when unplugging it from the
unit. Pulling on the cord can damage it, and create the
danger of re and electrical shock.
Turn o all devices before hook up. Follow all instruc-
tions and use only designated cables.
Make sure not to pinch your ngers when you assemble
or disassemble this unit.
IMPORTANT SAFETY INSTRUCTIONS
Before using this unit, please read the following Safety instructions, and adhere to them.
Keep this manual close by for easy reference.
In this manual, the degrees of danger are classi ed and explained as follows:
is sign shows there is a risk of death or severe injury if this unit is not properly used as
instructed.
is sign shows there is a risk of injury or material damage if this unit is not properly used
as instructed.
*Material damage here means a damage to the room, furniture or animals or pets.
In case in the future your instrument gets too old to
play/use or malfunctions beyond repair, please ob-
serve the instructions of this mark, or, if any question,
be sure to contact your dealer or your nearest town or
municipal o ce for its proper disposal.
3
取扱説明書
Upstream Downstream
CU-1
NAMES AND FUNCTIONS
❶ LOWER MANUAL
Square-front (“waterfall”-style) virtual multi-contact keys, 61
notes.
❷ PRESET KEYS
Selects the Patch or Favorite of the Lower part. 9 Preset Keys
plus Cancel, 2 Preset Keys for adjusting Drawbar settings.
❸ POWER LAMP
Indicates when the power is “ON.”
❹ SIDE PANELS
Use these decorative side panels to help secure the XK-5 Draw-
bar Keyboard on either side.
❺ SIDE BRACKET
Place the XK-5 Keyboard on top of these brackets.
❻ H-BUS FROM ORGAN JACK
Use a proprietary Hammond cable to connect the
XK-5 Keyboard to the XLK-5. e cable will supply both DC
power and data from/to the XK-5.
❼ H-BUS TO PEDAL JACK
Use a proprietary Hammond cable to connect the
XLK-5 an EXP-250 Expression Pedal or an XPK-250W Pedal
Clavier.
❽ CU-1 JACK
Use to connect a CU-1 Leslie Mode Switch.
❾ CU-1 MOUNTING HOLE
ree (3) mounting holes are provided to allow the CU-1 to be
mounted in two di erent locations.
❿ HOLE CAP (2pcs)
Use these to plug the screw holes on the rear of the XK-5 Key-
board (see page 5).
⓫ KNOB BOLT (4pcs)
M6 x 15mm.
⓬ RUBBER FOOT (4pcs)
Use these if you wish to mount the XLK-5 to an ST-XLK3
Keyboard Stand.
⓭ TAPPING SCREW (4pcs)
ø4 x 12mm. Use these to attach the rubber feet described above
to mount the XLK-5 to an ST-XLK3 Keyboard Stand.
⓮ H-BUS CABLE
25cm. Use with sticking label.
⓯ PROTECTIVE SHEET (2pcs)
Use these to protect the inside of the panels from the aw dur-
ing attaching the XK-5.
Downstream side
❸
❹ ❺
❷
❼
⓮
❻
❶
❿
❽
❾
⓫
⓬
⓭
⓯
Specyfikacje produktu
| Marka: | Hammond |
| Kategoria: | organ |
| Model: | XLK-5 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Hammond XLK-5, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje organ Hammond
23 Września 2024
23 Września 2024
23 Września 2024
22 Września 2024
22 Września 2024
22 Września 2024
22 Września 2024
21 Września 2024
21 Września 2024
21 Września 2024
Instrukcje organ
Najnowsze instrukcje dla organ
11 Października 2024
5 Października 2024
23 Września 2024
23 Września 2024
23 Września 2024
23 Września 2024
23 Września 2024
23 Września 2024
23 Września 2024
23 Września 2024