Instrukcja obsługi Hammond PK-200GL

Hammond klawiatura PK-200GL

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Hammond PK-200GL (14 stron) w kategorii klawiatura. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/14
IMPORTANT SAFETY
INSTRUCTIONS
P.2
NAMES AND
FUNCTIONS
P.4
MOUNTING THE
EXPRESSION PEDAL
P.5
MAKING THE
CONNECTIONS
P.6
USING THE INTERNAL
SOUND GENERATOR
P.8
MIDI CHANNEL, MERGE
P.9
ADVANCED OPERATION
P.10
OTHERS
P.12
Contents

Model:
Owner’s Manual
Thank you, and congratulations on your choice of a Hammond
MIDI sound pedalboard!
The XPK-130G has 13 pedals (C to C), while the XPK-200G and
XPK-200GL both have 20 pedals (C to G). In addition, the XPK-200GL has
wooden naturals of extended length, to make “heel and toe” playing style
easier.
In addition to the MIDI capabilities, these units also contain 5 built-in Pedal
Voices, allowing you to use them as “stand-alone” units.
In order to get the most out of this instrument for many years to come,
please take the time to read this manual carefully and in its entirety.
MIDI SOUND PEDALBOARD

2
IMPORTANT SAFETY INSTRUCTIONS
Before using this unit, please read these instructions carefully.
Please be sure to keep this manual at hand even after reading it once.
This “Safety Instructions” section contains very important points for securing your safety. Strictly observe the instructions, please.
In this manual, the degrees of dangers and damages are classi ed and explained as follows:
WARNING
CAUTION
This sign shows there is a risk of death or severe injury if this unit is not properly
used as instructed.
This sign shows there is a risk of injury or material damage if this unit is not properly
used as instructed.
*“Material damage” is de ned as damage to the room, furniture or animals / pets
WARNING
Do not open (or modify in any way) the unit or its AC
adaptor.
Do not attempt to repair the unit, or replace parts in
it (expect when this manual provides speci c instruc-
tions directing you to do so). Refer all servicing to
your retailer, the nearest Hammond, or authorized
Hammond distributor, as listed on the “Service” page.
Never use or store the unit in places that are:
Subject to temperature extremes (e.g., direct sun-
light in an enclosed vehicle, near a heating duct, on
top of heat-generating equipment)
Damp (e.g., baths, washrooms, on wet  oors)
Humid
Exposed to rain
Dusty
Subject to high levels of vibration.
Be sure to use only AC adaptor supplied with the unit.
Also, make sure the line voltage at the installation
matches the input voltage speci ed on the AC adap-
tor’s body. Other AC adaptors may use a di erent po-
larity, or be designed for a di erent voltage, so their
use could result in damage, malfunction, or electric
shock.
Do not excessively twist or bend the power cord, nor
place heavy objects on it. Doing so can damage the
cord, producing severed elements and short circuits.
Damaged cords are  re and shock hazards!
Do not allow any objects (e.g.,  ammable material,
coins, pins); or liquids of any kind (water, so drinks,
etc.) to penetrate the unit.
Immediately turn the power o , remove the AC adap-
tor from the outlet, and request servicing by your re-
tailer, the nearest Hammond, or authorized Hammond
distributor, as listed on the “Service” page when:
e AC adaptor, the power-supply cord, or the plug
has been damaged; or
If smoke or unusual odor occurs
Objects have fallen into, or liquid has been spilled
onto the unit; or
e unit has been exposed to rain (or otherwise has
become wet); or
e unit does not appear to operate normally or ex-
hibits a marked change in performance.
In households with small children, an adult should
provide supervision until the child is capable of follow-
ing all the rules essential for the safe operation of the
unit.
Protect the unit from strong impact.
(Do not drop it!)
Do not force the unit’s power supply cord to share an
outlet with an unreasonable number of other units. Be
especially careful when using extension cords - the to-
tal power used by all units you have connected to the
extension cord’s outlet must never exceed the power
rating (watts/amperes) for the extension cord. Exces-
sive loads can cause the insulation on the cord to heat
up and eventually melt through.
Before using the unit in a foreign country, consult with
your retailer, the nearest Hammond, or an authorized
Hammond distributor, as listed on the “Service” page.
Do not put anything that contains water (e.g., ower
vases) on this unit. Also, avoid the use of insecticides,
perfumes, alcohol, nail polish, spray cans, etc., near the
unit. Swi ly wipe away any liquid that spills on the unit
using a dry, so cloth.
3
Owner’s Manual
CAUTION
e unit and the AC adaptor should be located so their
location or position does not interfere with their prop-
er ventilation.
Always grasp only the plug on the AC adaptor cord
when plugging into, or unplugging from, an outlet or
this unit.
At regular intervals, you should unplug the AC adap-
tor and clean it by using a dry cloth to wipe all dust
and other accumulations away from its prongs. Also,
disconnect the power plug from the power outlet
whenever the unit is to remain unused for an extended
period of time. Any accumulation of dust between the
power plug and the power outlet can result in poor in-
sulation and lead to  re.
Try to prevent cords and cables from becoming en-
tangled. Also, all cords and cables should be placed so
they are out of the reach of children.
Never climb on the top of, nor place heavy objects on
the unit.
Never handle the AC adaptor or its plugs with wet
hands when plugging into, or unplugging from, an
outlet of this unit.
Before moving the unit, disconnect the AC adaptor
and all cords coming from external units, and also re-
move the accessories attached to the unit.
When transporting the unit, do not li the unit by the
pedals, which may cause damage. Use the frame to li .
Do not stand this unit with the cables connected to it,
which may cause damage to jacks and cables.
Before cleaning the unit, turn o the power and unplug
the AC adaptor from the outlet.
Whenever you suspect a possibility of lightning in your
area, disconnect the AC adaptor from the outlet.

Specyfikacje produktu

Marka: Hammond
Kategoria: klawiatura
Model: PK-200GL

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Hammond PK-200GL, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje klawiatura Hammond

Hammond

Hammond PK-200GL Instrukcja

5 Października 2024
Hammond

Hammond XPK-130G Instrukcja

5 Października 2024
Hammond

Hammond XPK-100 Instrukcja

20 Września 2024
Hammond

Hammond SKX Pro Instrukcja

19 Września 2024
Hammond

Hammond Leslie 122A Instrukcja

18 Września 2024
Hammond

Hammond XPK-200 Instrukcja

17 Września 2024
Hammond

Hammond Leslie 2101 MkII Instrukcja

17 Września 2024

Instrukcje klawiatura

Najnowsze instrukcje dla klawiatura

Speed-Link

Speed-Link VIRTUIS Instrukcja

14 Października 2024
Speed-Link

Speed-Link ATMOS Instrukcja

13 Października 2024
Targus

Targus Thura GXT 860 Instrukcja

13 Października 2024
Roland

Roland Fantom G8 Instrukcja

11 Października 2024
Yamaha

Yamaha Portatone PSR-160 Instrukcja

10 Października 2024
Roland

Roland E-30 Instrukcja

10 Października 2024
Yamaha

Yamaha Electone B-45 Instrukcja

10 Października 2024
Urban Factory

Urban Factory GWK01UF Instrukcja

9 Października 2024
Trust

Trust 24645 Instrukcja

9 Października 2024
Goldtouch

Goldtouch Elite GTE-08899 Instrukcja

9 Października 2024