Instrukcja obsługi Hamilton Beach 14348


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Hamilton Beach 14348 (24 stron) w kategorii Żelazo. Ta instrukcja była pomocna dla 12 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/24
English .......................................................................................... 2
USA: 1-800-851-8900
Visit www.hamiltonbeach.com for our complete line of products and Use and Care
Guides – as well as delicious recipes, tips, and to register your product online!
Français ...................................................................................... 14
Canada : 1-800-267-2826
Rendez-vous sur www.hamiltonbeach.ca pour notre liste complète de produits et
de nos manuels utilisateur – ainsi que nos délicieuses recettes, nos conseils, et pour
enregistrer votre produit en ligne !
Espol ...................................................................................... 29
En xico: 01-800-71-16-100
¡Visite www.hamiltonbeach.com.mx para obtener nuestra línea completa de productos
y las Guías de Uso y Cuidado, además de deliciosas recetas, consejos, y para registrar
su producto en línea!
Irons
Fer à repasser
Planchas
840164202
Le invitamos a leer cuidadosamente este
instructivo antes de usar su aparato.
READ BEFORE USE
À LIRE AVANT UTILISATION
LEA ANTES DE USAR
840164202 ENv05.qxd:840164200 ENv01.qxd 7/14/10 1:24 PM Page 1
32
This product is intended for household use only.
WARNING! Shock Hazard: This appliance has a polarized plug (one
wide blade) that reduces the risk of electric shock. The plug fits only
one way into a polarized outlet. Do not defeat the safety purpose of
the plug by modifying the plug in any way or by using an adapter. If the
plug does not fit, reverse the plug. If it still does not fit, have an electri-
cian replace the outlet.
OTHER CONSUMER SAFETY INFORMATION
Please Read Before First Use
• During first use of the iron, it may appear to smoke. This will
stop and does not indicate a defect or hazard.
• Many irons spit or sputter during the first few uses with tap
water. This happens as the steam chamber becomes condi-
tioned. This will stop after a few uses.
• Steam vents should be cleared before first use. Prepare iron for
steam ironing; then iron over an old cloth for a few minutes
while letting iron steam.
IMPORTANT SAFEGUARDS
When using your flatiron, basic safety precautions should always be
followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING
1. Use iron only for its intended use.
2. Verify that the voltage in your home corresponds to that of your
appliance.
3. To protect against risk of electric shock, do not immerse the iron
in water or other liquids.
4. The iron should always be turned to OFF before plugging or
unplugging from outlet. Never yank cord to disconnect from
outlet; instead, grasp plug and pull to disconnect.
5. Do not allow cord to touch hot surfaces. Let iron cool completely
before putting away. Loop cord loosely around iron when storing.
6. Always disconnect iron from electrical outlet when filling with
water or emptying and when not in use.
7. Do not operate iron with a damaged cord or if the iron has been
dropped or damaged. To avoid the risk of electric shock, do not
disassemble the iron. Call our toll-free customer service number
for information on examination and repair. Incorrect reassembly
can cause a risk of electric shock when the iron is used.
8. Close supervision is necessary for any appliance being used by
or near children. Do not leave iron unattended while connected
or on an ironing board.
9. Burns can occur from touching hot metal parts, hot water, or
steam. Use caution when you turn a steam iron upside down
there may be hot water in the reservoir.
SPECIAL INSTRUCTIONS
1. To avoid a circuit overload, do not operate another high-wattage
appliance on the same circuit.
2. If an extension cord is absolutely necessary, a 10-ampere cord
should be used. Cords rated for less amperage may overheat.
Care should be taken to arrange the cord so that it cannot be
pulled or tripped over.
SAVE THESE INSTRUCTIONS!
840164202 ENv05.qxd:840164200 ENv01.qxd 7/14/10 1:24 PM Page 2
54
Parts and Features
The iron is equipped with a position sensor. If iron is left motionless,
it will turn off automatically and cool to room temperature.
To restart, move iron and allow it to reheat on heel position:
— Iron will reheat to the previously selected setting.
Iron will lose memory when turned off ( O) or unplugged.
The iron turns off automatically when left in these positions:
Iron Position
Inadvertently resting
on soleplate
Inadvertently resting
on either side
Resting on heel
Position Sensing Feature
Retractable
Cord*
Cord Release
Button*
Spray and
Blast of Steam
Buttons
Adjustable
Steam Dial
Water Tank
Fill Cover
Soleplate Water Tank Self-Clean
Button
Power Indicator
Lights (see inset)
Temperature
Settings
Button
(see inset)
Heel Rest
The light is . . . This means . . .
RED and Solid Power OFF ( O). This light will
remain on until iron is unplugged.
RED and Blinking Iron was heating/reheating and went
to OFF ( O). Iron will reheat when
moved.
GREEN and Solid Iron is heated and ready for ironing.
GREEN and Blinking Iron is preheating/heating.
*on selected models only
Motionless Time
30 seconds
15 minutes max
15 minutes
840164202 ENv05.qxd:840164200 ENv01.qxd 7/14/10 1:24 PM Page 4


Specyfikacje produktu

Marka: Hamilton Beach
Kategoria: Żelazo
Model: 14348

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Hamilton Beach 14348, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Żelazo Hamilton Beach

Instrukcje Żelazo

Najnowsze instrukcje dla Żelazo

TriStar

TriStar ST-8137AH Instrukcja

15 Października 2024
Imetec

Imetec E9801 Instrukcja

15 Października 2024
Tefal

Tefal AquaTurbo FV8210 Instrukcja

11 Października 2024
Bomann

Bomann CB 740 Instrukcja

10 Października 2024
Sunbeam

Sunbeam Compact 2630-33 Instrukcja

10 Października 2024
Laurastar

Laurastar LIFT 510 Instrukcja

10 Października 2024
Conair

Conair GlideLite GI305 Instrukcja

9 Października 2024
Ufesa

Ufesa GS1600 Instrukcja

9 Października 2024
Ufesa

Ufesa SV1200 Instrukcja

9 Października 2024
Ufesa

Ufesa Compact2Go GS1800 Instrukcja

9 Października 2024