Instrukcja obsługi GVM GP-80QD

GVM Niesklasyfikowane GP-80QD

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla GVM GP-80QD (1 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/1
shutter release Shutter release
extension cable
1 Package Contents
1 Locate the battery clip on the back of the remote. .
2 Inser t the batter y. .
2
2
2
22 Installing the Battery
Plug the remote cable into the remote and motor.
3
3
3
33 Connecting he emote nd otor t r a m
2. Plug the shutter release cable into the remote
control and the camera’s remote control terminal.
Use the extension cable if more length is required.
+
+
+
++ =
=
=
==
Portable bag
Batter y Hook&LoopRemote 4
4
4
44 Settings Menu：
Remote cable
1. Turn off power to reset the remote control.
2. Settings Menu
1/ Set the Language:
1. Press the up or down arrow and highlight the
Language menu option (P1).
2. Press the right or left arrow button to change
language between English and Chinese. Long
press the middle button to save your settings.
Set the start point:2/
1. Press the up or down arrow and
highlight the Settings menu option
(P2).
2. Press the middle button.
3. Highlight the Set Start option and
press the middle button (P3).
4. Press the right or left arrow button
to move the slider. Press the middle
button to stop the motion.
5. Press the middle button a second
time to select the start point (P4)
6. Long press the middle button to
save the start point.
Set the end point:3/
1. Highlight the Set End option and press the
middle button (P5)
2. Press the right or left arrow button to move
the slider. Press the middle button to stop the
motion.
3. Press the middle button a second time to
select the end point (P6)
4. Long press the middle button to save the
end point.
Motorized Slider
Following or Parallax Shot
The camera always points at the subject.
1. Loosen both left and right side adjusting rod brakes.
2. Move the camera base to the left side and adjust the
rod so that the camera points
at the subject.
3. Lock the left side rod brake.
4. Move the camera base to
the right side and adjust the
rod so that the camera points
at the subject.
5. Lock the right side rod brake.
Pan Shot
The camera pans with a maximum angle of 120°.
1. Loosen both left and right side adjusting rod brakes.
2. Move the camera base to
the left side and adjust the
rod so that the camera
points to the left side of the
subject.
3. Lock the left side rod brake
4. Move the camera base to
the right side and adjust the
rod so that the camera points
at the right side of the subject.
5. Lock the right side rod brake.
TROUBLE SHOOTING
1. Use a standard Sony NP-F550/F570/F770/F9XX
series battery.
2. Monitor the battery power level shown on the bottom
of the remote controller.
3. Make sure all cables are firmly inserted into all
devices.
4. If the slider is not horizontal, make sure to lock the
center brake before turning off the power or
disconnecting the cable. Under normal operations, the
motor acts as a brake and any loss of power will permit
the camera base to quickly fall to its lowest point
potentially damaging your camera or slider.
1. Locate the shutter release and extension
cable.
Using the time-lapse function
MOTORIZED SLIDER
GP-80QD/GP-120QD
Camera shutter
release input
P3P2
P4
Set St art
Set En d
Lang ua g e:En gl is h
Rese t: No
Versi on : 1.0
Sett in g
Vide o Sh ot
Time Lap se
Sh ut te r s et up
Sett in g
Set St art
Set En d
Lang ua g e:En gl is h
Rese t: No
Versi on : 1.0
Sett in g
Spee d: 50%
Step :0
Set Sa rt: -3 3554 43 2
Set St art
Set St art
Set En d
Lang ua g e:En gl is h
Rese t: No
Versi on : 1.0
Sett in g
Pan-shot for Maximum angle 90°
Following shoot
Battery Charger
DC
DC
DC
DCDC
a
a
a
aadapter
dapter
dapter
dapterdapterDC adapterDC adapter
S
S
S
SSh
h
h
hhu
u
u
uut
t
t
ttt
t
t
tte
e
e
eer
r
r
rrShutter
Re
Re
Re
ReRel
l
l
lle
e
e
eea
a
a
aas
s
s
sse
e
e
eeRelease
Shutter
Release
M
M
M
MMo
o
o
oot
t
t
tto
o
o
oor
r
r
rrMotor
c
c
c
cco
o
o
oon
n
n
nnn
n
n
nne
e
e
eec
c
c
cct
t
t
tti
i
i
iio
o
o
oon
n
n
nnconnection
Motor
connection
There are three photography methods available with
this slider. The Common Shot, the Following Shot and
the Pan Shot.
Common Shot
The camera angle does not change.
1. Loosen the adjusting rod
brakes on both ends and
center using the provided
scales.
2. Tighten the adjusting rod
on both ends.
5
5
5
55 Using the slider
Auto Loo p
Auto Stop
Auto Mod e
Auto Loo p
Auto Stop
Auto Mod e
P14
5. Auto Mode
Auto Mode has two options: Auto Loop and Auto Stop. To use
either one, you first must set the start and end points as
described in the Settings section.
1. Press the up or down arrow
and highlight the Video Shot
menu option. Then press the
middle button.
2. Press the up or down arrow
buttons and highlight the Auto
Mode menu option (P13).
Auto Loop will provide motion between the start and 1/
end points indefinitely.
1. Highlight the Auto Loop button and then
press the middle button (P14).
2. Press the right or left arrow to
start motion.
3. Press the middle button to
pause the motion.
Auto Stop will provide motion between the start and 2/
end points one time.
1. Highlight the Auto Stop button and then
press the middle button (P15).
2. Press the right or left arrow to start motion.
3. Press the middle button to pause the motion.
Common Shot
P7P6
P4
P8
Spee d: 50%
Step :0
Set En d: - 33 55 4432
Set En d
Vide o Sh ot
Time Lap se
Sh ut te r s et up
Sett in g
Inte rv al： .1 0
Time - la p se : 1. 0
Stop Tim e： .1 2
Photo：1000
Auto Loo p No：
Sett in g
Spee d: 50%
Step :0
Set Sa rt: -3 3554 43 2
Set St art
P10
Vide o Sh ot
Time Lap se
Sh ut te r s et up
Sett in g
Manu al M ode
Auto Mode
Sett in g
Set St art
Set En d
Lang ua g e:En gl is h
Rese t: No
Versi on : 1.0
Sett in g
Speed 5 0: %
Direct i o n Pa use :
Manu al M ode
Video Sho t
Manu al M ode
Auto Mode
Se tting
P13P12
P15
4/ Set the speed:
1. At any time while setting the start or end
points, you can adjust the speed from
[1-100%] by pressing the Up or Down arrows
(P4), (P6).
Reset:5/
1.Highlight the Reset option(P7).
2.Press the right r left arrow button
to choose"Yes"or"No".Press the
middle button to reset the remote
control or go back setting menu.
3.Long press the middle button to
save the setting.
3. Time lapse menu
1/ Set the start point:
1. Press the up or down arrow and highlight the Time Lapse
menu option (P8).
2. Press the middle button.
3. Highlight the parameter you want to change
and adjust its value by pressing the right or left
arrow button (P9).
4. Press the middle button when complete.
5. Press the right or left arrow button to begin
time lapse shooting.
6. Press the middle button to pause any motion.
7. The minimum Interval time is 0.1 second, the
minimum Stop time is 1 second, and the Stop
time needs longer than Time-lapse time at least
0.2 seconds。
4. Video shot menu
1/ Manual Mode:
1. Press the up or down arrow and highlight
the Video Shot menu option (P10) and then
press the middle button.
2. Highlight Manual Mode and then press the
middle button(P11).
3. Press the left or right arrow button to begin
motion (P12).
4. You can adjust the speed at any time by
pressing the Up or Down arrow buttons.
P11
P9
P1
P5
P6
Spee d: 50%
Step :0
Set En d: - 33 55 4432
Set En d

Specyfikacje produktu

Marka: GVM
Kategoria: Niesklasyfikowane
Model: GP-80QD

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z GVM GP-80QD, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Niesklasyfikowane GVM

GVM

GVM GP-80QD Instrukcja

7 Października 2024
GVM

GVM RGB-T20R Instrukcja

4 Października 2024
GVM

GVM TL15RS Instrukcja

13 Września 2024
GVM

GVM Y60D256 Instrukcja

5 Września 2024
GVM

GVM WY-2V Instrukcja

23 Sierpnia 2024
GVM

GVM GT-120WD Instrukcja

20 Sierpnia 2024
GVM

GVM GT-80WD Instrukcja

9 Sierpnia 2024
GVM

GVM 2D Instrukcja

6 Lipca 2024
GVM

GVM 520S-B Instrukcja

4 Lipca 2024
GVM

GVM MX150D Instrukcja

4 Lipca 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024
Husqvarna

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024
Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024