Instrukcja obsługi GVision C43BI-AC-4000

GVision monitor C43BI-AC-4000

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla GVision C43BI-AC-4000 (17 stron) w kategorii monitor. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/17
C BI-AC- 43 4000
4K UHD
USER’S MANUAL
SECURITY MONITOR CCTV
GVISION USA, INC
30398 Esperanza , Rancho Santa Margarita / 949.586.3338 / info@gvision CA 92688 -usa.com
WWW.GVISION- USA.COM
WWW.GVISION- USA.COM
30398 Esperanza 4594 / Email. info@gvision, Rancho Santa Margarita / Tel. 949 3338 / Fax. 949 CA 92688 -586- -272- - usa.com
2
Important Information
Care and Cleaning
WARNING
TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS
UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE
FULLY INSERTED.
REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM WALL SOCKET. TO FULLY
DISENGAGE THE POWER TO THE UNIT, PLEASE DISCONNECT THE POWER CORD FROM THE AC OUTLET. DO NOT
REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
This symbol warns user that uninsulated voltage within the unit may have sufficient magnitude to cause electric shock.
Therefore, it is dangerous to make any kind of contact with any part inside this unit.
This symbol alerts the user that important literature concerning the operation and maintenance of this unit has been included.
Therefore, it should be read carefully in order to avoid any problems.
CAUTION: Please use the power cord provided with this display in accordance with the table below. If a power cord is not supplied with
this equipment, please contact GVISION. For all other cases, please use the power cord with the plug style that matches the power
socket where the monitor is located. The compatible power cord corresponds to the AC voltage of the power outlet and has been
*When operating this monitor with its AC 125 240V power supply, use a power supply cord that matches the power supply - voltage of
cloth. Avoid using any liquid, aerosol or glass cleaners.
Slots and openings on the back or top of the cabinet are for ventilation. They must not be blocked or covered. Your monitor
should never be placed near or over a radiator or heat source, or in a built in installation unless proper ventilation is provided.-
Never push objects or spill liquid of any kind into this product.
WWW.GVISION- USA.COM
30398 Esperanza 4594 / Email. info@gvision, Rancho Santa Margarita / Tel. 949 3338 / Fax. 949 CA 92688 -586- -272- - usa.com
3
Safety Precautions / Maintenance
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in
accordance with the manufacturers instructions.
Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
ampliers) that produce heat.
Do not defeat the safety purpose of the polarized or
grounding- blades type plug. A polarized plug has two
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If
the provided plug does not t into your outlet, consult an
electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
Only use attachments/accessories specied by the
manufacturer.
Use only with the cart, stand, tripod, bracket, or table
specied by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when
moving the combination to avoid injury from tipmonitor -
over.
Unplug monitor during lightning storms or when unused
for long periods of time.
Refer all servicing to qualied service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power supply cord or -
plug is damaged, liquid has been spilled or objects have
fallen into the apparatus, the monitor has been exposed
to rain or moisture, does not operate normally, or has
been dropped.
Do not press strongly upon the panel with a hand or a
sharp object such as a nail, pencil, or pen, or make a
scratch on it.
Do not stick metal objects or any other conductive
material into the power cord. Do not touch the end of
the power cord while it is plugged in.
-Keep the packing anti moisture material or vinyl
packing out of the reach of children. Anti-moisture
material is harmful if swallowed. If swallowed, induce
vomiting and go to the nearest hospital. Additionally,
vinyl packing can cause suocation. Keep it out of the
reach of children.
Concerning the Power Cord (Can dier by country):
Check the specication page of this owner’s manual to
be certain concerning current requirements. Do not
connect too many devices to the same AC power outlet
as this could result in re or electric shock. Do not
overload wall outlets. Overloaded wall outlets, loose or
damaged wall outlets, extension cords, frayed power
cords, or damaged or cracked wire insulation are
dangerous. Any of these conditions could result in
electric shock or re. Periodically examine the cord of
your device, and if its appearance indicates damage or
deterioration, unplug it, discontinue use of the device,
and have the cord replaced with an exact replacement
part by an authorized servicer. Protect the power cord
from physical or mechanical abuse, such as being
twisted, kinked, pinched, closed in a door, or walked
upon. Pay particular attention to plugs, wall outlets, and
the point where the cord exits the device. Do not move
the monitor with the power cord plugged in. Do not use
a damaged or loose power cord. Be sure do grasp the
plug when unplugging the power cord. Do not pull on
the power cord to unplug the monitor.
To reduce the risk of re or electrical shock, do not
expose this product to rain, moisture or other liquids. Do
not touch the screen with wet hands. Do not install this
product near ammable objects such as gasoline or
candles, or expose the TV to direct air conditioning.
Do not use high voltage electrical equipment near the
TV (e.g., a bug zapper). This may result in product
malfunction.
Do not expose to dripping or splashing and do not place
objects lled with liquids, such as vases, cups, etc. on
or over the apparatus (e.g., on shelves above the unit).
without Do not attempt to modify this product in any way
written authorization from GVISION. Unauthorized
modication could void the user’s authority to operate
this product.
Moving: Make sure the product is turned o, unplugged,
and all cables have been removed. It may take 2 or
more people to carry . Do not press or put stress monitor
on the front panel of the monitor screen.
If you smell smoke or other odors coming from the
monitor screen, unplug the power cord and contact an
authorized service center.
If water or another substance enters the product (like an
AC adapter, power cord, or unit), disconnect the display
power cord and contact the service center immediately.
Otherwise, this may result in re or electric shock.


Specyfikacje produktu

Marka: GVision
Kategoria: monitor
Model: C43BI-AC-4000

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z GVision C43BI-AC-4000, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje monitor GVision

GVision

GVision C32BD-A6-4000 Instrukcja

7 Października 2024
GVision

GVision PE10ZJ-OS-45P0D Instrukcja

7 Października 2024
GVision

GVision PVM24ZD-OC3-4 Instrukcja

7 Października 2024
GVision

GVision C19BD-A6-4000 Instrukcja

7 Października 2024
GVision

GVision C43BD-A6-4000 Instrukcja

7 Października 2024
GVision

GVision C43BI-AC-4000 Instrukcja

7 Października 2024
GVision

GVision C32BI-AC-4000 Instrukcja

7 Października 2024
GVision

GVision PVM10ZJ-OC4-4 Instrukcja

7 Października 2024
GVision

GVision C27BD-AU-4000 Instrukcja

7 Października 2024
GVision

GVision C55BI-AC-4000 Instrukcja

7 Października 2024

Instrukcje monitor

Najnowsze instrukcje dla monitor

Acer

Acer EB321HQUDbmidphx Instrukcja

15 Października 2024
Bauhn

Bauhn APMTR-0624 Instrukcja

15 Października 2024
Acer

Acer KA270H Instrukcja

14 Października 2024
Acer

Acer K272HUL Dbmidpx Instrukcja

14 Października 2024
NEC

NEC E424 Instrukcja

14 Października 2024
LG

LG UltraGear 32GS85Q Instrukcja

14 Października 2024
LG

LG UltraGear 27GS85Q Instrukcja

14 Października 2024
Acer

Acer EK220QB Instrukcja

13 Października 2024
Acer

Acer S242HL Instrukcja

12 Października 2024