Instrukcja obsługi Gtech LHT50

Gtech nożyce do żywopłotu LHT50

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Gtech LHT50 (20 stron) w kategorii nożyce do żywopłotu. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/20

OPERATING MANUAL

Original Instructions

Lightweight

Hedge Trimmer

Model Number: LHT50

5360_LHT50_manual_aw_update.indd 1

5360_LHT50_manual_aw_update.indd 15360_LHT50_manual_aw_update.indd 1 01/02/2023 16:39

01/02/2023 16:39

01/02/2023 16:3901/02/2023 16:39

GENERAL POWER TOOL SAFETY WARNINGS:

IMPORTANT: READ ALL INSTRUCTIONS BEFORE USE.

RETAIN INSTRUCTIONS FOR FUTURE REFERENCE.

Do not use in rain or leave outdoors whilst raining.

WARNING: Read all safety warnings, instructions, illustrations, and

speciﬁcations provided with this power too. Failure to follow all

instructions listed below may result in electric shock, ﬁre, and/or

serious injury. Save all warnings and instructions for future reference.

The term “power tool” in the warnings refers

to your mains-operated (corded) power tool or

battery-operated (cordless) power tool.

Work area safety

• Keep the work area clean and well-lit.

Cluttered or dark areas invite accidents.

• Do not operate power tools in explosive

atmospheres, such as in the presence of

ﬂammable liquids, gases or dust. Power

tools create sparks which may ignite the dust

or fumes.

• Keep children and bystanders away while

operating a power tool. Distractions can

cause you to lose control.

• Only use in daylight or good artiﬁcial light.

Electrical safety

• Power tool plugs must match the outlet.

Never modify the plug in any way. Do

not use any adapter plugs with earthed

(grounded) power tools. Unmodiﬁed plugs

and matching outlets will reduce the risk of

electric shock.

• Avoid body contact with earthed or

grounded surfaces, such as pipes, radiators,

ranges and refrigerators. There is an

increased risk of electric shock if your body is

earthed or grounded.

• Do not expose power tools to rain or wet

conditions. Water entering a power tool will

increase the risk of electric shock.

• Do not abuse the charger cord. Never

use the charger cord for carrying, pulling

or unplugging the power tool. Keep the

charger cord away from heat, oil, sharp

edges or moving parts. Damaged or

entangled charger cords increase the risk of

electric shock.

• When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use of

a cord suitable for outdoor use reduces the risk

of electric shock.

• If operating a power tool in a damp location

is unavoidable, use a residual current device

(RCD) protected supply. Use of an RCD

reduces the risk of electric shock.

• Do not handle the charger or hedge trimmer

with wet hands.

Personal safety

• Stay alert, watch what you are doing and

use common sense when operating a power

tool. Do not use a power tool while you are

tired or under the inﬂuence of drugs, alcohol

or medication. A moment of inattention

while operating power tools may result in

serious personal injury.

• Use personal protective equipment. Always

wear eye protection. Protective equipment

such as a dust mask, non-skid safety shoes,

hard hat or hearing protection used for

appropriate conditions will reduce personal

injuries.

• Prevent unintentional starting. Ensure

the switch is in the ‘Oﬀ’ position before

connecting to a power source and/or

battery pack, picking up or carrying the tool.

Carrying power tools with your ﬁnger on the

switch or energising power tools that have

the switch on invites accidents.

• Remove any adjusting key or wrench before

turning the power tool on. A wrench or a key

le attached to a rotating part of the power

tool may result in personal injury.

• Do not overreach. Keep proper footing

and balance at all times. This enables better

control of the power tool in unexpected

situations.

• Dress properly. Do not wear loose clothing

or jewellery. Keep your hair and clothing

away from moving parts. Loose clothes,

jewellery, or long hair can be caught in

moving parts.

• If devices are provided for the connection

5360_LHT50_manual_aw_update.indd 2

5360_LHT50_manual_aw_update.indd 25360_LHT50_manual_aw_update.indd 2 01/02/2023 16:39

01/02/2023 16:39

01/02/2023 16:3901/02/2023 16:39

of dust extraction and collection facilities,

ensure these are connected and properly

used. Use of dust collection can reduce dust-

related hazards.

• Do not let familiarity gained from frequent

use of tools allow you to become

complacent and ignore tool safety

principles. A careless action can cause

severe injury within a fraction of a second.

Power tool use and care

• Do not force the power tool. Use the correct

power tool for your application. The correct

power tool will do the job better and safer at

the rate for which it was designed.

• Do not use the power tool if the switch

does not turn it on or oﬀ. Any power tool

that cannot be controlled by the switch is

dangerous and must be repaired.

• Disconnect the charger from the power

source and/or remove the battery pack,

if detachable, from the power tool before

making any adjustments, changing

accessories, or storing power tools. Such

preventive safety measure reduces the risk of

starting the power tool accidentally.

• Store idle power tools out of way of children

and do not allow persons unfamiliar with

the hedge trimmer or these instructions to

operate the power tool. Power tools are

dangerous in the hands of untrained users.

• Maintain power tools and accessories.

Check for misalignment or binding of

moving parts, breakage of parts and any

other condition that may aﬀect the power

tool’s operation. If damaged, have the

hedge trimmer repaired before use. Many

accidents are caused by poorly maintained

power tools.

• Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting

edges are less likely to bind and are easier to

control.

• Use the power tool, accessories, and

tool bits etc in accordance with these

instructions, taking into account the working

conditions and the work to be performed.

Use of the power tool for operations diﬀerent

from those intended could result in a

hazardous situation.

• Keep handles and grasping surfaces dry,

clean and free from oil and grease. Slippery

handles and grasping surfaces do not allow

for safe handling and control of the tool in

unexpected situations.

Service

• Have your power tool serviced by a

qualiﬁed repair person using only identical

replacement parts. This will ensure that the

safety of the power tool is maintained.

• Do not attempt to repair any damaged

parts on the hedge trimmer unless you are

qualiﬁed to do so.

• Only use replacement parts or accessories

provided by or recommended by Gtech.

Hedge Trimmer safety warnings

• Keep all parts of the body away from the blade.

Do not remove cut material, or hold material

to be cut, when the blades are moving. Blades

continue to move aer the switch is turned oﬀ.

A moment of inattention while operating the

hedge trimmer may result in serious personal

injury.

• Carry the hedge trimmer by the handle with

the cutter blade stopped and taking care not

to operate any power switch. Proper carrying

of the hedge trimmer will decrease the risk

of inadvertent starting and resultant personal

injury from the blade.

• When transporting or storing the hedge

trimmer, always ﬁt the blade cover. Proper

handling of the hedge trimmer will decrease

the risk of personal injury from the blades.

• When clearing jammed material or servicing

the unit, make sure all power switches are

oﬀ and the power cord and/or battery pack

is removed or disconnected. Unexpected

actuation of the hedge trimmer while clearing

jammed material or servicing may result in

serious personal injury.

• Hold the hedge trimmer by insulated

gripping surfaces only, because the cutter

blade may contact hidden wiring or its own

cord. Blades contacting a ‘live’ wire may

make exposed metal parts of the hedge

trimmer ‘live’ and could give the operator an

electric shock.

• Keep all power cords and cables away from

the cutting area. Power cords or cables may

be hidden in hedges or bushes and can be

accidentally cut by the blade.

• Do not use the hedge trimmer in bad

weather conditions, especially when there is

a risk of lightning. This decreases the risk of

5360_LHT50_manual_aw_update.indd 3

5360_LHT50_manual_aw_update.indd 35360_LHT50_manual_aw_update.indd 3 01/02/2023 16:39

01/02/2023 16:39

01/02/2023 16:3901/02/2023 16:39

Specyfikacje produktu

Marka:	Gtech
Kategoria:	nożyce do żywopłotu
Model:	LHT50

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Gtech LHT50, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje nożyce do żywopłotu Gtech

Gtech LHT50 Instrukcja

16 Września 2024

Instrukcje nożyce do żywopłotu

Najnowsze instrukcje dla nożyce do żywopłotu

Kibani WPET1206 - XXL Instrukcja

15 Października 2024

Tanaka THT-2000SB Instrukcja

15 Października 2024

Black & Decker BHT518 Instrukcja

14 Października 2024

MacAllister MHTP24EB Instrukcja

13 Października 2024

Husqvarna 226HS99S Instrukcja

12 Października 2024

Husqvarna 122HD60 Instrukcja

11 Października 2024

Florabest FHT 600 B2 Instrukcja

11 Października 2024

Ozito PXCGSS-018 Instrukcja

10 Października 2024

Einhell Royal HEC 551 Instrukcja

9 Października 2024

Dolmar HT-2460 Instrukcja

9 Października 2024