Instrukcja obsługi Grizzly G0555P

Grizzly Maszyna do piłowania G0555P

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Grizzly G0555P (68 stron) w kategorii Maszyna do piłowania. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/68
MODEL G0555/G0555P
ULTIMATE 14" BANDSAW
OWNER'S MANUAL
COPYRIGHT © AUGUST, 2002 BY GRIZZLY INDUSTRIAL, INC., REVISED SEPTEMBER, 2017 (AB)
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
FOR MODELS MANUFACTURED SINCE 5/11 #TR4508 PRINTED IN TAIWAN
252923
Model
G0555
Model
G0555P
This manual provides critical safety instructions on the proper setup,
operation, maintenance, and service of this machine/tool. Save this
document, refer to it often, and use it to instruct other operators.
Failure to read, understand and follow the instructions in this manual
may result in fire or serious personal injury—including amputation,
electrocution, or death.
The owner of this machine/tool is solely responsible for its safe use.
This responsibility includes but is not limited to proper installation in
a safe environment, personnel training and usage authorization,
proper inspection and maintenance, manual availability and compre-
hension, application of safety devices, cutting/sanding/grinding tool
integrity, and the usage of personal protective equipment.
The manufacturer will not be held liable for injury or property damage
from negligence, improper training, machine modifications or misuse.
Some dust created by power sanding, sawing, grinding, drilling, and
other construction activities contains chemicals known to the State
of California to cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
• Lead from lead-based paints.
• Crystalline silica from bricks, cement and other masonry products.
• Arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you
do this type of work. To reduce your exposure to these chemicals:
Work in a well ventilated area, and work with approved safety equip-
ment, such as those dust masks that are specially designed to filter
out microscopic particles.
Table of Contents
INTRODUCTION 2 ...............................................
Manual Accuracy ........................................... 2
Contact Info.................................................... 2
Machine Description ...................................... 2
Identification ................................................... 3
Machine Data Sheet ...................................... 4
SECTION 1: SAFETY ....................................... 6
Safety Instructions for Machinery .................. 6
Additional Safety for Bandsaws ..................... 8
SECTION 2: POWER SUPPLY ........................ 9
SECTION 3: SETUP ....................................... 12
Needed for Setup ......................................... 12
Unpacking .................................................... 12
Hardware Recognition Chart ....................... 13
Inventory ...................................................... 14
Cleanup ........................................................ 15
Site Considerations ...................................... 16
Assembly ..................................................... 17
Blade Center Tracking ................................. 21
Dust Collection ............................................. 22
Power Connection........................................ 23
Test Run ...................................................... 23
Tensioning Blade ......................................... 24
Adjusting Blade Support Bearings ............... 25
Adjusting Blade Guide Bearings .................. 26
Table Tilt Calibration .................................... 28
Aligning Table .............................................. 29
Aligning Fence ............................................. 30
SECTION 4: OPERATIONS ........................... 31
Operation Overview ..................................... 31
Disabling & Locking Switch.......................... 32
Workpiece Inspection................................... 32
Guide Post ................................................... 33
Table Tilt ...................................................... 33
Blade Speed ................................................ 34
Blade Information ......................................... 35
Blade Change .............................................. 37
Basic Cutting Tips ........................................ 38
Cutting Options ............................................ 38
Ripping ......................................................... 38
Crosscutting ................................................. 39
Resawing ..................................................... 39
Cutting Curves ............................................. 40
Stacked Cuts................................................ 40
SECTION 5: ACCESSORIES ......................... 41
SECTION 6: MAINTENANCE ......................... 43
Schedule ...................................................... 43
Cleaning & Protecting .................................. 43
Lubrication ................................................... 44
Redressing Rubber Tires ............................. 44
SECTION 7: SERVICE ................................... 45
Troubleshooting ........................................... 45
V-Belt Tension ............................................. 47
Replacing V-Belt .......................................... 48
Shimming Table ........................................... 48
Wheel Alignment .......................................... 49
Blade Lead ................................................... 52
Blade Tensioner ........................................... 53
Fence Scale Calibration ............................... 54
SECTION 8: WIRING ...................................... 55
Wiring Safety Instructions ............................ 55
Wiring Diagram ............................................ 56
SECTION 9: PARTS ....................................... 57
Main ............................................................. 57
Stand ............................................................ 60
Fence ........................................................... 61
Labels .......................................................... 62
WARRANTY AND RETURNS ........................ 65

Specyfikacje produktu

Marka: Grizzly
Kategoria: Maszyna do piłowania
Model: G0555P

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Grizzly G0555P, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Maszyna do piłowania Grizzly

Grizzly

Grizzly EHS 900 L-Set Instrukcja

4 Października 2024
Grizzly

Grizzly EHS 750-69D Instrukcja

4 Października 2024
Grizzly

Grizzly EHS 460-2 T Instrukcja

4 Października 2024
Grizzly

Grizzly AKS 2040-25 Lion Set Instrukcja

3 Października 2024
Grizzly

Grizzly G0555 Instrukcja

24 Września 2024
Grizzly

Grizzly G0555P Instrukcja

24 Września 2024

Instrukcje Maszyna do piłowania

Najnowsze instrukcje dla Maszyna do piłowania

Makita

Makita 5603 Instrukcja

15 Października 2024
MSW

MSW -TAS287 Instrukcja

15 Października 2024
MSW

MSW T-SAW300 Instrukcja

15 Października 2024
Black & Decker

Black & Decker KS650 Instrukcja

14 Października 2024
Black & Decker

Black & Decker GKC3630L20 Instrukcja

14 Października 2024
Ferm

Ferm FKS-165 Instrukcja

14 Października 2024
Royal Catering

Royal Catering RCBS-1650 Instrukcja

14 Października 2024
Royal Catering

Royal Catering RCBS-1650.1ECO Instrukcja

14 Października 2024
Husqvarna

Husqvarna 365H Instrukcja

13 Października 2024
Makita

Makita DJV181Z Instrukcja

12 Października 2024