Instrukcja obsługi Greenlee CLM-1000E

Greenlee Przyrządy pomiarowe CLM-1000E

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Greenlee CLM-1000E (36 stron) w kategorii Przyrządy pomiarowe. Ta instrukcja była pomocna dla 11 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/36
52067362 REV 1 © 2014 Greenlee Textron Inc. 7/14
Read and understand all of the instructions and safety information in this manual before operating or
servicing this tool.
Lea y entienda todas las instrucciones y la información sobre seguridad que aparecen en este manual,
antes de manejar estas herramientas o darles mantenimiento.
Lire attentivement et bien comprendre toutes les instructions et les informations sur la sécurité de ce
manuel avant d’utiliser ou de procéder à l’entretien de cet outil.
Vor Bedienung oder Wartung dieses Messgerätes bitte alle Anweisungen und Sicherheitsinformationen
in diesem Handbuch genau durchlesen und beachten.
Cable Length Meters
Medidores de longitud
de cables
Indicateurs de longueur
de câble
Kabellängenmessgerät
CLM-1000
CLM-1000E
Español.............11
Français ...........19
Deutsch ............ 27
INSTRUCTION MANUAL • MANUAL DE INSTRUCCIONES
MANUEL D’INSTRUCTIONS • BEDIENUNGSANLEITUNG
2
Description
The Greenlee CLM-1000 and CLM-1000E Cable Length
Meters are hand-held testing devices with the follow-
ing measurement capabilities: resistance, temperature,
and length. They can be used as μΩ meters to measure
precise bonding resistances. The primary function of these
meters is to calculate the length of cable based upon its
material, temperature, and cable gauge. Cable material
type can be either uncoated copper or aluminum. There
are 20 pre-programmed and eight programmable cable
gauges. (There are no strands per cable specification for
the eight programmable switch positions.)
The pre-programmed switch positions
for the CLM-1000are:
• AWG (7 strands) – 2, 4, 6, 8, 10, 12, 14, 16, 18
• Aught (19 strands) – 1/0, 2/0, 3/0, 4/0
• kcmil (37 strands) – 250, 350, 400, 500
• kcmil (61 strands) – 600, 750, 1000
The pre-programmed switch positions
for the CLM-1000Eare:
• mm2 (7 strands) – 0.75, 1, 1.5, 2.5, 4, 6, 10, 16, 25, 35
• mm2 (19 strands) – 50, 70, 95
• mm2 (37 strands) – 120, 150, 185, 240
• mm2 (61 strands) – 300, 400, 500
Other capabilities include:
• Automatic temperature compensation
• Hold Mode to capture the present LCD value
• Programmable
• Auto Power Off
• Automatic ranging
• Backlight
KEEP THIS MANUAL
All specifications are nominal and may change as design
improvements occur. Greenlee Textron Inc. shall not be liable for
damages resulting from misapplication or misuse of its products.
® Registered: The color green for electrical test instruments is a
registered trademark of Textron Innovations Inc.
Safety
Safety is essential in the use and maintenance of Greenlee
tools and equipment. This instruction manual and any
markings on the tool provide information for avoiding
hazards and unsafe practices related to the use of this
tool. Observe all of the safety information provided.
Purpose of this Manual
This manual is intended to familiarize all personnel with
the safe operation and maintenance procedures for the
Greenlee CLM-1000 and CLM-1000E.
Keep this manual available to all personnel.
Replacement manuals are available upon request at no
charge at www.greenlee.com.
Do not discard this product or throw away!
Forrecycling information, go to
www.greenlee.com.
3
CLM-1000 • CLM-1000E
Important Safety Information
SAFETY ALERT
SYMBOL
This symbol is used to call your attention to hazards
or unsafe practices which could result in an injury
or property damage. The signal word, defined below,
indicates the severity of the hazard. The message
after the signal word provides information for pre-
venting or avoiding the hazard.
Immediate hazards which, if not avoided, WILL result
in severe injury or death.
Hazards which, if not avoided, COULD result in
severe injury or death.
Hazards or unsafe practices which, if not avoided,
MAY result in injury or property damage.
Read and understand this material
before operating or servicing this
equipment. Failure to understand how
to safely operate this tool could result
in an accident causing serious injury
or death.
Electric shock hazard:
Contact with live circuits could result
in severe injury or death.
Electric shock and fire hazard:
• Do not connect this unit to live voltage.
• Do not expose this unit to rain or moisture.
• Do not use the unit if it is wet or damaged.
• Using this unit near equipment that generates
electromagnetic interference can result in unstable or
inaccurate readings.
• Inspect the test leads or accessory before use. They
must be clean and dry, and the insulation must be in
good condition.
• Use this unit for the manufacturer’s intended purpose
only, as described in this manual. Anyotheruse can
impair the protection provided by the unit.
Failure to observe these warnings could result in severe
injury or death.
Electric shock hazard:
• Do not operate with the case open.
• Before opening the case, remove the test leads from
the circuit and shut off the unit.
Failure to observe these warnings could result in severe
injury or death.
Electric shock hazard:
• Do not attempt to repair this unit. It contains no user-
serviceable parts.
• Do not expose the unit to extremes in temperature or
high humidity. Refer to “Specifications.”
Failure to observe these precautions may result in injury
and can damage the unit.

Specyfikacje produktu

Marka: Greenlee
Kategoria: Przyrządy pomiarowe
Model: CLM-1000E

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Greenlee CLM-1000E, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Przyrządy pomiarowe Greenlee

Greenlee

Greenlee CLM-1000 Instrukcja

22 Września 2024
Greenlee

Greenlee 2007 POWER FINDER Instrukcja

14 Września 2024
Greenlee

Greenlee CLM-1000E Instrukcja

13 Września 2024

Instrukcje Przyrządy pomiarowe

Najnowsze instrukcje dla Przyrządy pomiarowe

Voltcraft

Voltcraft VC840 Instrukcja

28 Września 2024
Voltcraft

Voltcraft VC-12A Instrukcja

28 Września 2024
Voltcraft

Voltcraft 122953 - Colour Analysis Instrukcja

28 Września 2024
Voltcraft

Voltcraft VC960 Instrukcja

28 Września 2024
Voltcraft

Voltcraft VC-531 stroomtang Instrukcja

28 Września 2024
Voltcraft

Voltcraft VC-12 Instrukcja

28 Września 2024
Voltcraft

Voltcraft VC-10 Instrukcja

28 Września 2024
Voltcraft

Voltcraft VC100 serie Instrukcja

28 Września 2024
Voltcraft

Voltcraft VC-521 Instrukcja

28 Września 2024
Voltcraft

Voltcraft VC950 Instrukcja

28 Września 2024