Instrukcja obsługi Graco Ultra Clear 2L02VIB

Graco Elektroniczna niania Ultra Clear 2L02VIB

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Graco Ultra Clear 2L02VIB (12 stron) w kategorii Elektroniczna niania. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/12
2L01VIB/2L02VIB
Ultra Clear
Product Features
Parent’s Unit (PD141837)
Model 2L01 - 1 unit
Model 2L02 - 2 units
Power
Power/Volume
Clip
SoundLights
DC Adapter Jack
AC Adapter
Model 2L01 - Qty. 2
Model 2L02 - Qty. 3
Replacement Parts
• Warranty Information
(USA)
www.gracobaby.com
OR
1-800-345-4109
To register your Graco product from
within the U.S.A. visit us online at
www.gracobaby.com/productregistration.
We currently do not accept product
registrations from those living outside the
United States of America.
Product Registration
(USA)
To purchase parts or accessories or
for warranty information in the
United States, please contact us at the
following:
©2010 Graco PD142728B 4/10
Channel
Selector
Nursery Unit (PD141818)
Model 2L01/2L02 - 1 unit
1
DC Adapter Jack
Channel
Selector
Vibrate
NightLight
Power LED
Failure to follow these warnings and the assembly
instructions could result in serious injury or death.
This device is designed only to monitor the sounds of your child. It will not alert you
to your child’s silent activities. When using the monitor, you must still provide the
supervision necessary for the continued safety of your child. This product is not designed
or intended for use as a medical monitor. Always be sure that both the transmitter and
receiver are working properly and are within range of each other.
• STRANGULATION HAZARD. Keep the adapter cords out of the reach of children. Do
not use with extension cords.
• DO NOT place the Nursery Unit or its cord within your child’s reach. Do not put the
Nursery Unit inside a crib or play yard.
• Use ONLY with 110-120 volt AC electrical outlets.
• Protect the AC adapter cords. Place them so they are not walked on or pinched by
furniture or other items.
• Allow for proper ventilation when units are in use. Do not cover the Nursery
Unit or Parent Units with any object such as a blanket. Do not place it in a drawer or in
any location which would muffle the sound or interfere with the normal flow of air.
• DO NOT immerse any part of the Nursery Unit or Parent Units in water. Clean only with
a dry cloth.
• DO NOT place unit near water and moisture. Do not use the Nursery Unit outdoors. Do
not use the Nursery Unit near possible wet areas, such as a bathtub, shower, wash basin,
sink, laundry tub, swimming pool, wet basement, etc.
• Keep Nursery Unit away from heat sources, such as fireplaces, radiators, stoves,
and TVs or other appliances. Heat can damage the case or electrical parts.
• DO NOT use the Nursery Unit if:
• The adapter cords or plugs have been damaged.
• The unit has been exposed to liquids.
• Unit has been dropped or is damaged.
• DO NOT OPEN THE NURSERY UNIT, PARENT UNITS, OR ADAPTERS. No
user-serviceable parts inside. Risk of electrical shock, fire or death.
• The antenna used for this transmitter must be installed to provide a separation distance
of at least 20 cm (7.9”) from all persons and must not be co-located or operating in
conjunction with any other antenna or transmitter.
2
WARNING Modifications not authorized by the manufacturer may void users
authority to operate this device.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
• Look for the FCC ID on the bottom of the Nursery Unit and inside the Battery
compartment on the Parent Unit.
2L01VIB/2L02VIB
Ultra Clear Graco Children’s Products
3 Glenlake Pkwy Atlanta, GA 30328
FCC Statement:
Parent Unit
• Remove the battery door cover on the
Parent Unit with a key or flat blade screw
driver.
• Place 3-AAA (1.5V-LR03) batteries into
the battery compartment. Note the
proper orientation of the batteries.
• Do not mix old and new batteries.
• Do not mix alkaline, standard
(carbon zinc), or rechargeable
(ni-cadmium, etc) batteries.
• Place the battery door back on the unit.
• Please remove a dead battery promptly.
A dead battery left in the unit may leak,
damaging your unit.
• Do not attempt to recharge a
non-rechargeable battery.
• A rechargeable battery CANNOT be recharged by plugging the AC adapter into the
Parent Unit.
• Remove the batteries from the unit if it is no longer being used or will be stored for an
extended period of time.
• The Parent Unit uses 3-AAA (1.5V-LR03) batteries or standard 120 volt AC household
current. The Nursery Unit uses standard 120 volt AC household current.
• To use AC adapters, plug the connector on the cord into the AC adapter jack on the side
of the Parent Unit and the back of the Nursery Unit. Then plug adapter into a standard
wall outlet.
• Use ONLY the Graco adapters included with the unit. Do not use these adapters with
other equipment under any circumstances.
• If units do not work, check that AC adapters are plugged into working outlets.
Battery Installation
Using AC Adapters
+
-
+
-
+
-
Batteries should be disposed of
properly by recycling.
3
• In case you are experiencing some interference, the
channel on the Nursery Unit can be changed by sliding
the “ch” button on the side of the unit to either
channel A or B ("X" or "Y").
Selecting Channels
• The channel on the Parent Unit can be changed by
sliding the “ch” button on the side of the unit to either
channel A or B ("X" or "Y").
NOTE: Both units must be on the same channel.
A
B
A
B

Specyfikacje produktu

Marka: Graco
Kategoria: Elektroniczna niania
Model: Ultra Clear 2L02VIB

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Graco Ultra Clear 2L02VIB, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Elektroniczna niania Graco

Graco

Graco Ultra Clear 2L01VIB Instrukcja

12 Września 2024
Graco

Graco Ultra Clear 2L02VIB Instrukcja

12 Września 2024

Instrukcje Elektroniczna niania

Najnowsze instrukcje dla Elektroniczna niania

Alecto

Alecto DBX-72ECO Instrukcja

15 Stycznia 2025
ME

ME DBS-5 Instrukcja

15 Stycznia 2025
Uniden

Uniden BW 140R Instrukcja

15 Stycznia 2025
Lionelo

Lionelo Babyline 2.2 Instrukcja

15 Stycznia 2025
Alecto

Alecto DBX-98 Babyfoon Instrukcja

13 Stycznia 2025
Alecto

Alecto DVM 97 Babyfoon Instrukcja

13 Stycznia 2025
Alecto

Alecto fr 66 Babyfoon Instrukcja

13 Stycznia 2025
Alecto

Alecto fr 39 Babyfoon Instrukcja

13 Stycznia 2025
Alecto

Alecto DVM 95 Babyfoon Instrukcja

13 Stycznia 2025
Alecto

Alecto DBX-84 Babyfoon Instrukcja

13 Stycznia 2025