Instrukcja obsługi Gira 116165

Gira Niesklasyfikowane 116165

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Gira 116165 (4 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/4
LED orientation light white LED illumination
Order-No. : 1161 66
LED orientation light white LED illumination
Order-No. : 1161 67
LED orientation light white LED illumination
Order-No. : 1161 65
LED orientation light blue LED illumination
Order-No. : 1162 66
LED orientation light blue LED illumination
Order-No. : 1162 67
LED orientation light blue LED illumination
Order-No. : 1162 65
LED orientation light orange LED illumination
Order-No. : 1159 66
LED orientation light orange LED illumination
Order-No. : 1159 67
LED orientation light orange LED illumination
Order-No. : 1159 65
Operating instructions
1 Safety instructions
Electrical equipment may only be installed and fitted by electrically skilled persons.
Failure to observe the instructions may cause damage to the device and result in fire and
other hazards.
Danger of electric shock. Always disconnect device before working on it. At the same
time, take into account all circuit breakers that supply dangerous voltage to the device.
Fire hazard. Do not operate the LED luminaires on a dimmer. The LED luminaires cannot
be dimmed.
The LED luminaires may not be operated on an electronic switching insert (e.g. Tronic or
Triac insert). The switching inserts could be damaged.
The device is not suitable for use in safety systems or as an emergency light.
These instructions are an integral part of the product, and must remain with the end
customer.
2 Device components
Figure 1: Orientation light in IP 44 housing
1/4
32544522 17.05.2011
LED orientation light
10499124 I00
(1) Torx screws
(2) Cover plate
(3) LED orientation light
(4) Condensation water holes
(5) Fastening screws
(6) Cover frame
(7) Anchor
(8) Supporting frame screws
(9) Supporting frame
(10) Sealing flange
3 Function
Intended use
- LED luminaire for orientation
- Installation in appliance box to DIN 49073
Product characteristics
- Can be installed splash-protected in TX 44 housing
- Usable in switch combinations or individually
- Makes it easier to find switches and to orient oneself in dark rooms
i Due to manufacturing tolerances during LED manufacture, noticeable differences in
brightness and colour are possible.
4 Information for electrically skilled persons
4.1 Fitting and electrical connection
Connecting and installing orientation light
DANGER!
Electrical shock when live parts are touched.
Electrical shocks can be fatal.
Before working on the device, disconnect the power supply and cover up live
parts in the working environment.
Figure 2
32544522 10499124 I00 17.05.2011 2/4
LED orientation light
o Connect orientation light (3) to 230 V AC in accordance with connection example (Figure 2)
using the enclosed terminals. The phase conductor is connected to the brown cable and
the neutral conductor is connected to the blue cable. If desired, an installation switch (11)
or a relay switch can be used for switching off.
In order to ensure degree of protection IP 44, assembly must be performed as shown
(Figure 1).
o Insert sealing flange (10) together with supporting frame (9) into the appliance box and
fasten with the supporting frame screws (8).
o Position cover frame (6) and fasten to the wall with enclosed anchors (7) and fastening
screws (5).
o Attach orientation light (3). Condensation water holes (4) must be at the bottom.
o Fit cover plate (2) and secure with Torx screws (1).
Dismantling the orientation light
Figure 3
o Loosen Torx screws (1).
o Using a screwdriver, reach into the recesses (12) provided in the cover frame and detach
the cover plate.
o Using a screwdriver, reach into the recesses (13) provided in the orientation light and
detach the orientation light.
5 Appendix
5.1 Technical data
Rated voltage AC 230 V ~
Mains frequency 50 Hz
Power consumption 6.5 VA
Power factor approx. 0.1
Ambient temperature -15 ... 50 °C
Connection cable
Finely stranded 0.75 mm²
Cable length approx. 100 mm
32544522 10499124 I00 17.05.2011 3/4
LED orientation light

Specyfikacje produktu

Marka: Gira
Kategoria: Niesklasyfikowane
Model: 116165

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Gira 116165, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Niesklasyfikowane Gira

Gira

Gira Wetterstation Plus Instrukcja

3 Października 2024
Gira

Gira 036600 Instrukcja

10 Września 2024
Gira

Gira 039026 Instrukcja

8 Września 2024
Gira

Gira 116165 Instrukcja

6 Września 2024
Gira

Gira 039247 Instrukcja

5 Września 2024
Gira

Gira 039228 Instrukcja

5 Września 2024
Gira

Gira 039243 Instrukcja

2 Września 2024
Gira

Gira 039143 Instrukcja

1 Września 2024
Gira

Gira 1187 00 Instrukcja

31 Sierpnia 2024
Gira

Gira 039042 Instrukcja

29 Sierpnia 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

GBC

GBC ThermaBind T500Pro Instrukcja

15 Stycznia 2025
Da-Lite

Da-Lite Parallax 29850 Instrukcja

15 Stycznia 2025
Crivit

Crivit IAN 290909 Instrukcja

15 Stycznia 2025
Tripp Lite

Tripp Lite SmartRack SRW12US Instrukcja

15 Stycznia 2025
Powerfix

Powerfix IAN 280221 Instrukcja

15 Stycznia 2025
AGM

AGM Rattler TC35-640 Instrukcja

15 Stycznia 2025
AGM

AGM Wolf-7 Pro Instrukcja

15 Stycznia 2025
AGM

AGM Anaconda TC50-640 Instrukcja

15 Stycznia 2025
AGM

AGM Secutor Pro TS50-640 Instrukcja

15 Stycznia 2025
Microchip

Microchip AT91SAM9M11 Instrukcja

15 Stycznia 2025