Instrukcja obsługi Gigaset A120A Quattro

Gigaset telefon A120A Quattro

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Gigaset A120A Quattro (16 stron) w kategorii telefon. Ta instrukcja była pomocna dla 18 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/16

Gigaset A120/A120A/A220/A220A

The handset at a glance

1 Charge status of the batteries:

= e V U (flat to full) 

= flashes: batteries almost flat

e V U flashes: charging

2 Answering machine icon (A120A/

A220A only)

3 Display keys

4 End call key and On/Off key

5 Talk key/Handsfree key

6Control key (u)

7Directory key (press down on the 

control key)

8 Key 1 

Open the answering machine 

(A120A/A220A only)/network mailbox

9Star key 

Ringers on/off (press and hold); with 

an open connection: switch from pulse 

dialling to tone dialling (press briefly)

10 Key 0/recall key

Consultation call (flash): press and hold

11 Hash key

Keypad lock on/off (press and hold); 

toggles between upper/lower case 

and digits; inserts a dialling pause 

(press and hold)

12 Microphone

(handsfree mode A220/A220A only)

A120/A120A A220/A220A

1± V

11.12. 11:56

INT MENU

Please note

New messages in the calls list/answering machine list/network mailbox list (¢ page 6)

are indicated in the display by the message New messages.

Display keys:

Pressing a key launches the function that appears above

that key in the display.

Gigaset service contact numbers:

For personal advice on our range of products and for repairs or guarantee/warranty claims

call:

Service Centre UK: 0845 0318190 (local call cost charge)

Service Centre IE: 0818 200 033 (6.6561 Ct./Call)

Please have your proof of purchase ready when calling.

Display Function when pressed

INT Call other registered handsets ¢ page 9.

MENU Open main/submenu (see menu overview

¢ page 15).

“ Go back one menu level.

UScroll up/down or adjust volume with u.

T Move cursor to left/right with u.

˜Backspace deletes one character at a time.

OK Confirm menu function or save entry.

ECO DECT

During a call, the level of the handset's radio signal adjusts automatically according to

the distance between the handset and base station: the shorter the distance, the lower

the signal strength (radiation).

The handset’s radio signal is switched off when it is in standby mode. The base station,

however, maintains contact with the handset with fewer radio signals.

In addition, the base station radio signals are switched off when the No Radiation

setting is enabled.

MENU ¤ ¤ ¤ ¤ ¤ u Settings OK u Base OK u ECO DECT ¤ ¤ OK No Radiation

¤ OK (‰= radiation switched off, icon ½ in the left-hand corner of the display)

Please note

◆All registered handsets must support this feature.

◆For quick connection of incoming calls the handset repeatedly switches to recep-

tion mode for short periods. This increases energy consumption and therefore

reduces the standby and talk times.

The base station at a

glance

Registration/paging key: 

Search for handsets (press

briefly, "Paging" ¢ page 9)

hold ¢ page 9).

Safety precautions

Read the safety precautions and the user guide before use.

Explain their content and the potential hazards associated with using the telephone to

your children.

Use only the power adapter supplied, as indicated on the devices.

Use only rechargeable batteries that correspond to the specification (see

„Technical Data“). Never use a conventional (non-rechargeable) battery or other

battery types as this could result in significant health risks and personal injury.

Rechargeable batteries, which are noticeably damaged, must be replaced.

Using your telephone may affect nearby medical equipment. Be aware of the

technical conditions in your particular environment, e.g., doctor's surgery.

If you use a medical device (e.g., a pacemaker), please contact the device

manufacturer. They will be able to advise you regarding the susceptibility of the

device to external sources of high frequency energy (for the specifications of your

Gigaset product see „Technical Data“).

Do not hold the rear of the handset to your ear when it is ringing or when speaker

mode is activated. Otherwise you risk serious and permanent damage to your

hearing.

Your Gigaset is compatible with the majority of digital hearing aids on the market.

However, perfect function with all hearing aids cannot be guaranteed.

The phone may cause interference in analogue hearing aids (humming or

whistling) or cause them to overload. If you require assistance, please contact the

hearing aid supplier.

The base and charger are not splashproof. For this reason do not install them in a

damp environment such as bathrooms or shower rooms.

Do not use your phone/phone system in environments with a potential explosion

hazard (e.g., paint shops).

If you give your Gigaset to a third party, make sure you also give them the user

guide.

Remove faulty devices from use or have them repaired by our Service team, as

these could interfere with other wireless services.

First steps

Check the pack contents

One Gigaset A120/A120A/A220/A220A base station, one mains adapter, one Gigaset

handset, one phone cord, two batteries, one battery cover, one user guide.

If you have purchased a model with multiple handsets, the package should contain

two batteries, a battery cover and a charging cradle with mains adapter for each addi-

tional handset.

Setting up the base station and charging cradle (if included)

◆Set up the base station at a central location on a flat, non-slip surface in your house

or apartment. You can also mount the base station and charging cradle on the

wall.

◆Pay attention to the range of the base station. This is up to 300 m in unobstructed

outdoor areas and up to 50 m inside buildings.

◆The base station and charging cradle are designed for use in enclosed dry rooms

in a temperature range of +5 °C to +45 °C.

◆Care: Wipe down the base station and handset with a damp cloth (no solvents) or

an antistatic cloth. Never use a dry cloth. This can cause static.

◆The phone's feet do not usually leave any marks on surfaces. However, due to the

multitude of different varnishes and polishes used on today's furnishings, the risk

of marks on the surfaces cannot be completely ruled out.

◆Never expose the telephone to the influence of heat sources, direct sunlight or

other electrical devices.

◆Protect your Gigaset from moisture, dust, corrosive liquids and vapours.

◆The device cannot be used in the event of a power failure. It is also not possible to

transmit emergency calls.

◆Emergency numbers cannot be dialled if the keypad lock is activated!

Connecting the base station

¤First connect the mains adapter

¤Then connect the telephone

jack 2 and insert the cables

into the cable ducts.

Please note:

◆The mains adapter must always

be connected, as the phone will

not operate without mains con-

nection.

◆Use only the mains adapter and phone cord supplied. Pin connections on tele-

phone cables can vary.

◆The answering machine (A120A/A220A only) is ready for use approx. 30 seconds

after the base has been connected.

Connecting the charging cradle (if included)

¤Connect the flat plug to the power

supply 1.

¤Plug the mains adapter into the plug

socket 2.

If you need to disconnect

the plug from the charg-

ing cradle, press the

release button 3 and

disconnect the plug 4.

Setting up the handset for use

The display is protected by a plastic film. Please remove the protective film!

Inserting the batteries and closing the battery cover

Warning

Use only the rechargeable batteries recommended by Gigaset Communications

GmbH (¢ page 11), i.e. never use conventional (non-rechargeable) batteries as

this could result in significant health risks and personal injury. For example, the

batteries could explode. The phone could also malfunction or be damaged as a

result of using batteries that are not of the recommended type.

¤Insert the batteries with

the polarity in the correct

direction.

The polarity is indicated in the

battery compartment.

¤First insert the battery cover at the top a.

¤Then press the cover b until it clicks into

place.

¤To reopen the battery cover, grip into the

cavity on the casing, then pull the battery

cover in an upward direction.

Specyfikacje produktu

Marka:	Gigaset
Kategoria:	telefon
Model:	A120A Quattro
Kolor produktu:	Czarny
Wbudowany wyświetlacz:	Tak
Częstotliwość wejściowa AC:	50 Hz
Napięcie wejściowe AC:	230 V
Podręcznik użytkownika:	Tak
Czas rozmowy:	18 h
Czas gotowości:	200 h
Czas ładowania:	6.5 h
Gniazdko wyjścia DC:	Tak
Technologia baterii:	Niklowo-metalowo-wodorkowa (NiMH)
Długość przekątnej ekranu:	1.4 "
Ładowarka:	Tak
Maksymalny zakres zewnętrzny:	300 m
Zakres temperatur (eksploatacja):	5 - 45 °C
Zakres wilgotności względnej:	20 - 75 %
Rozdzielczość:	5 x 7 px
Nazwa i identyfikacja dzwoniącego:	Tak
Możliwośc rozmowy konferencyjnej:	Tak
Liczba przycisków:	19
Rodzaj baterii:	AAA
Model:	Telefon w systemie DECT
Liczba baterii:	2
Kolory wyświetlacza:	Monochromatyczne
Typ mocowania:	Biurko / Ściana
Maksymalny czas nagrywania:	25 min
Regulacja głośności:	Cyfrowy
Alarm:	Tak
Kolor podświetlenia:	Bursztyn
Zestaw słuchawkowy w zestawie:	Tak
Obsługa funkcji Plug & Play:	Tak
Ilość linii teksu:	3 linii
Ponowne wybieranie numeru:	Tak
Pojemność książki telefonicznej:	50 wejścia
Wskaźnik niskiego poziomu naładowania akumulatora:	Tak
Połączenia bezprzewodowe:	Tak
Wskaźnik pełnego naładowania akumulatora:	Tak
Automatyczna sekretarka:	Tak
Staromodny telefon:	Nie
Współpraca z wieloma słuchawkami:	4
Pojemność listy połączeń:	25
Liczba dołączonych słuchawek:	4
Pojemność listy wybieranych połączeń:	10
Klawisze nawigacyjne:	Tak
Wskaźnik poziomu naładowania akumulatora:	Tak
Identyfikacja rozmówcy:	Tak
Maksymalny zakres wewnętrzny (pomieszczenie):	50 m
Baza w zestawie:	Tak
Wymiary słuchawki (SxGxW):	151 x 47 x 31 mm
Wymiary stacji bazowej:	89 x 80 x 61 mm