Instrukcja obsługi Gigabyte 3D Galaxy II

Gigabyte wentylator do PC 3D Galaxy II

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Gigabyte 3D Galaxy II (24 stron) w kategorii wentylator do PC. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/24

GH-WIU02

English

User’s Manual

3D Galaxy II

Liquid Cooling System

Caution

1. Before pouring liquid coolant into the tank to test the liquid cooling system, please

reconfirm all the tubes have been fastened and the tube clips are in the right position.

2. While the water in the tank is lower than the low water-level, the red light on the bottom

of PCB will blink. (Please purchase GIGABYTE

™ liquid coolant to fill it.)

3. When the liquid is lower than the low water-level, the system will turn off automatically

within four seconds after detection of water inadequacy.

4. While removing the tubes for disassembly, please make sure to keep all the devices

away from any electronic part. (Please refer to disassembly process instruction)

The following are not covered by the warranty

1. Use the product incorrectly or in a manner other than the designed purpose.

2. Nonobservance of the proper operation provided. (e.g. over-clocking)

3. Malfunction due to interference from other devices.

4. Unauthorized modification of the product.

5. Consequential damage to other objects due to the product’s fault.

6. Malfunction arising from casualties (earthquake, thunder, fire, and flood).

7. The product’s warranty label has been removed or damaged.

8. The devices inside, including power supply, hard disk, CD-ROM drive, motherboard,

ventilator, etc, are not detached from the casing prior to the transportation of the com-

puter product, resulting in damage to the casing or computer-related devices.

9. Any loss caused by failure to follow the installation process contained in the user

manual.

10. Any damage to the system arising from coolant leakage due to improper installation.

11. Use only GIGABYTE

™ Liquid Coolant. Any damage arising from the use of liquids

other than GIGABYTE™ Liquid Coolant is not covered by the warranty.

English

Table content

1 Accessories List 4

2 Specification Instruction 6

3 Feature Instruction 6

4 Liquid Cooling System Installation 7

4-1 Installation Preparation 7

4-2 Intel® Pentium® 4 LAG775 Back Plate Installation 7

4-3 PCI Rear Fan Speed Controller Installation 8

4-4 Tube Installation 8

4-5 4-way Splitter Valve to the Tube on Waterblock Installation 9

4-6 Radiator to 4-way Splitter Valve Installation 10

4-7 Radiator to the Inlet of Water Tank 11

4-8 4-way Splitter Valve to the Outlet of Water Pump 11

4-9 Waterblock Installation 12

4-10 Intel® Pentium® 4 LGA775 Bracket Installation 12

4-11 AMD K8 Clip Installation 13

4-12 AMD AM2 Clip Installation 13

4-13 Fasten 4-way Splitter Valve 14

4-14 MOSFET Air Cooling Fan Installation 14

4-15 Pump Power Cord Installation 15

4-16 Fan Speed Control Box and Power Cord Instruction 16

4-17 Fan Speed Control Box Installation 16

4-18 Heat Sink Installation 17

5 Liquid Cooling System Installation and Test 18

5-1 Liquid Cooling System Installation and Test 18

5-2 Radiator Installation 19

6 Liquid Cooling System Disassembly 20

7 4-way Splitter Valve Instruction and User Manual 22

English

Specyfikacje produktu

Marka:	Gigabyte
Kategoria:	wentylator do PC
Model:	3D Galaxy II
Kolor produktu:	Blue, White
Model:	Zestaw do chłodzenia płynami
Obsługiwane produkty:	Intel Core 2 Extreme/Core 2 Quad/Core 2 Duo/Pentium Extreme/Pentium 4/Pentium D, \nAMD AM2/Athlon FX/Athlon 64x2/Athlon 64/Sempron
Czas eksploatacji:	70000 h