Instrukcja obsługi Giga Copper G4202T

Giga Copper Niesklasyfikowane G4202T

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Giga Copper G4202T (5 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/5

G4202T

G.hn Master and Client

Quick start guide

For further informaon and purchase enquiries

please contact info@gigacopper.net

1. Introducon

With the G.hn modem G4202T you can easily extend

your network via exisng data and telephone cables.

The devices are also suitable for the distribuon of ber

opc connecons from the ONT to the router via exisng

telephone line.

The modem can use any type of cable - both twisted pair

and non-twisted pair - for data transmission and

achieves a speed of approx. 1500 Mbit/s (sum of both

transmission direcons).

The devices are always connected in pairs - a master and

a client. The master determines how fast the data is

transferred towards the client and back

(download/upload).

In networks with several clients, a G.hn switch can be

used instead of several master modems (see

Installaon). This enables the central administraon of

all G.hn components.

2. Package content

 G4202T Master or G420 Client 2T

 DC-12V/1A Power adapter

 RJ11/RJ11 telephone cable , 4- wire (SISO and MIMO) 1.5m

 TAE-F/RJ11 , 4- pole (SISO and MIMO) plug

3. Technical data

 Dimensions : 103 * 66 * 27 : mm

 Weight: 0,19 kg

 Operang temperature: 0°C - 40°C

 Power consumpon: < 3 Wa

4. G.hn Specicaon

 G.hn Wave2, 2-200 MHz

 Connecon type: SISO (1 wire pair, 2-200MHz) and

MIMO (2 wire pairs, 2- MHz) 100

 Total bandwidth ca. 1500 Mbit/s –

(Sum of Download and Upload)

 Spling of the bandwidth variable ex works –, :

70% Download (from master client) to

30% Upload (from client master) to

 Maximum permissible aenuaon of the cable

connecon: 75dB

5. Interfaces

Panel and LED descripon

Labelling

Descripon

12V DC

Power input

RST

Recessed reset buon (15 Sec .)

LINE

G.hn port

G1, G2

2x 1 Gigabit Ethernet Port

PHONE

Analog phone port (RJ45)

PWR LED

Displays power availability

LINE LED

Status of the G.hn connecon

(Green - OK, Yellow - weak signal,

O - no connecon)

G1/G2 LED

Ethernet Connecon Status

6. Installaon

Variant 1 Point- - : one master and client – „ to Point “

Variant 2 Connecon to the Switch G4224T or G4200- –8T/4T

7. Connecon type and wire assignment on device (RJ45 plug)

The G.hn connecon can be established either via one wire pair (connecon type SISO PHONE ) or = G.hn prole “ 200MHz”

via two wire pairs (connecon type MIMO PHONE ). The connecon type must be = G.hn prole “ 100MHz MIMO”

congured via web interface in both modems or via the G.hn switch.

The default seng PHONE is one wire pair connecon (“ 200MHz”).

Wire assignment SISO

Wire assignment MIMO

8. Installaon notes

 The wires of a pair can be connected straight or crossed.

 Maximum range of the G.hn connecon depends on the type of cable used, the connecon type and the environment.

Typical values for a 0.5 mm twisted pair cable: connecon possible up to approx. 600/800 metres (SISO/MIMO),

maximum bandwidth of 1500 Mbit/s - up to approx. 100/200 metres (SISO/MIMO).

 For longer cables ( approx. 100-150m), the bandwidth can be increased by up to 15% (SISO) resp. up to 25% (MIMO) up

by adjusng the signal level. For this purpose, the "Range opmizaon model" must be set to "Long" in the web

interface of both devices resp. the "LongRangeMode" seng must be acvated in the G.hn switch.

 The negoated bandwidth can be queried via the web interface of the devices (see point 11).

 The bandwidth split of the G.hn connecon is variable. It can be set between 80/20% and 20/80%. In the factory seng,

70% of the bandwidth is reserved for download (direcon master to client) and 30% for upload (direcon client to

master). The allocaon can be congured via master web interface (menu G.hn DownStream / UpStream Rao) resp. via

the G.hn switch.



9. Administraon

10. IP address

The devices do not require IP addresses from the local network segment during operaon, because they transmit the data

trac via the MAC addresses. In the factory seng, they do not obtain any addresses from the local DHCP server.

If desired, stac IP addresses can be congured or the DHCP client can be acvated ("IP" menu in the web interface).

11. Query of the negoated bandwidth

The negoated bandwidths for both transmission direcons can be queried via web interface of each modem. The values

shown are gross data transmission rates on physical layer (PHY). Transmission rate on applicaon layer is 15-20% lower.

IP-Adress: 192.168.10.252 (Master), 192.168.10.253 (Client). Login passwort: paterna Factory reset passwort: betera ,

 Connect your computer to the G.hn modem via the GE

port..

 Assign a xed IP address to your computer, e.g.

192.168.10.100 (network mask 255.255.255.0).

 Open a web browser and connect to 192.168.10.252 or

192.168.10.253

 Login with the standard password: paterna

It is possible to loop through an analogue telephone line on the same line parallel to the G.hn signal. To do this,

connect the telephone line and the telephone to the PHONE connecons on the G.hn master and G.hn client.

Specyfikacje produktu

Marka:	Giga Copper
Kategoria:	Niesklasyfikowane
Model:	G4202T

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Giga Copper G4202T, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Niesklasyfikowane Giga Copper

Giga Copper G4201TM Instrukcja

1 Października 2024

Giga Copper G4202T Instrukcja

1 Października 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024

Stihl HT 70 Instrukcja

15 Października 2024

Ernesto H14270 Instrukcja

15 Października 2024

Uniden BT MIC KIT Instrukcja

15 Października 2024

Vaude Omnis Bike 26 Instrukcja

15 Października 2024

ART ProChannel II Instrukcja

15 Października 2024

Aukey DR02J Instrukcja

15 Października 2024

Master Lock 653EURD Instrukcja

15 Października 2024

Roland FR-18 Diatonic Instrukcja

15 Października 2024