Instrukcja obsługi Get DHMD203

Get Osuszacze DHMD203

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Get DHMD203 (8 stron) w kategorii Osuszacze. Ta instrukcja była pomocna dla 13 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/8
USER INSTRUCTIONS FOR PORTABLE DEHUMIDIFIERS
16 LITRE - MODEL NO. DHMD163
20 LITRE - MODEL NO. DHMD203
THANK YOU FOR CHOOSING YOUR NEW DEHUMIDIFIER. BEFORE USING THE UNIT READ
THESE INSTRUCTIONS FULLY AND RETAIN THEM FOR FUTURE REFERENCE
THESE DEHUMIDIFIERS ARE INTENDED FOR DOMESTIC USE ONLY.
SAFETY NOTES
1. Do not connect to any AC socket outlet that is damaged *.
2. Do not use with extension leads and multi-way adapters.
3. Ensure hands are not wet when inserting the plug into the power socket.
4. Do not use in the following locations:-
Next to a source of fire.
An area where oil is likely to splash.
An area exposed to direct sunlight.
An area where water is likely to splash.
Near a bath, shower or a swimming pool.
In a greenhouse.
An area where flammable gases or liquids are present.
5. Never insert your finger or any foreign objects into the air outlet. Take special care to warn children of these
dangers.
6. Always store the unit upright in order to maintain the compressor in a proper working condition. If not, leave the
unit upright for at least 24 hours before operating.
7. Always unplug the unit before cleaning.
8. Do not cover the unit or place any object on the control panel
9. Do not obstruct the air inlets/outlets of the appliance.
10. Do not allow children to play with or climb on the machine.
11. If a fault develops or if servicing is required, this must only be carried out be a qualified service engineer.
12. If the supply cord of this appliance becomes damaged, it must be replaced by a qualified engineer.
13. This appliance is fitted with an approved BS 1363 13A 3 pin plug and a 13A BS 1362 fuse. In the event of either
requiring replacement ensure that equivalent rated and approved components are used. See plug replacement
details below.
PLUG REPLACEMENT
If the plug is damaged and requires replacement, follow the wiring instructions supplied with the new plug.
1. The green and yellow wire must be connected to the
terminal marked with the letter E or the earth symbol.
2. The blue wire must be connected to the terminal
marked with the letter N.
3. The brown wire must be connected to the terminal
marked with the letter L.
4. A 13 amp plug to BS 1363 must be fitted a 13 Amp
fuse to BS 1362.
* For your safety and protection, this unit is earthed through the power cord plug when plugged into a matching wall
socket. If you are not sure whether the wall sockets in your home are properly earthed, consult a qualified electrician. Do
not use plug adaptors or extension cords with this unit.
IDENTIFICATION OF PARTS
CONTROL PANEL
LCD DISPLAY
Set Humidity level indicator
Relative Humidity of the surrounding air in the room
Temperature of the surrounding air in the room
Timer setting in hours (01 to 12)
This symbol shows when machine is defrosting
Machine stopped due to full water tank
Fan on LOW speed
Fan on HIGH speed
Tank Full
Indicator
Power Button Timer Button
LED Display Ambient
Temperature
Ambient
Humidity
Fan Speed
Indicator
Set Humidity
Level indicator
Humidity Level
Setting Buttons
Fan Speed
Button


Specyfikacje produktu

Marka: Get
Kategoria: Osuszacze
Model: DHMD203

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Get DHMD203, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą