Instrukcja obsługi Gerni Classic 100.5

Gerni Myjka wysokociśnieniowa Classic 100.5

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Gerni Classic 100.5 (7 stron) w kategorii Myjka wysokociśnieniowa. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/7

Safety Instructions Original Safety Instructions

Before ﬁ rst use of the machine, read the instructions

carefully. Save instructions for later use.

Safety instructions marked with this symbol must be

observed to prevent personal injury or serious damage

to property.

● The instruction consists of 4 parts. Part 1:3 Safety Instruc-

tions. Part 2:3 Serial speciﬁ c User Guide. Part 3:3 Trouble-

shooting, Serial speciﬁ c Technical Data and Disposal. Part

1:4 Warranty Conditions.

Warnings This machine has been designed for use with

cleaning agents supplied or recommended by Gerni. The use

of other cleaning agents or chemicals may adversely affect

the safety of the machine. High pressure jets

can be dangerous if subject to misuse. The jet must

not be directed at persons, live electrical equipment

or the machine itself. Do not use the machine

within range of persons unless they wear protective clothes.

Do not direct the jet against yourself or others in order to

clean footwear. Risk of explosion – Do not spray ﬂ amma-

ble liquids. High pressure washers shall not be used by

children or untrained personnel. High pressure hoses,

ﬁ ttings and couplings are important for the safety of the ma-

chine. Use only hoses, ﬁ ttings and couplings recommended

by Gerni. To ensure machine safety, use only original

spare parts recommended by Gerni. Water that has ﬂ own

through back-ﬂ ow preventers is considered to be non-potable.

Don’t use the machine if a supply cord or important parts

of the machine are damaged, e.g. safety devices, high pres-

sure hoses, trigger gun. Inadequate extension cords can

be dange rous. If an extension cord is used, it shall be suitable

for outdoor use, and the connection has to be kept dry and

off the ground. It is recommended that this is accomplished

by a cord reel which keeps the socket at least 60 mm above

the ground. Switch off and unplug the machine when

leaving it unattended, when ﬁ nished using it or when convert-

ing it to another function, when doing repair and maintenance.

During use of high pressure washers, aerosols may be

formed. Inhalation of aerosols can be hazardous to health, for

the protection against aerosols a respiratory mask of class

FFP 2 or equivalent may be needed, depending on the clean-

128334140 b (06.2016)

Unit 1/13 Bessemer Street | Blacktown NSW 2148 | Tel.: 1300 556 710

Part 1:3 Safety Instructions, High Pressure Washers, Classic, Classic PG, Super and Super PG

Caution:

Read the instructions

before using the machine

ing environment.

Intended Use and Terms of Liability The Classic, Classic

PG, Super and Super PG series have been developed for

domestic cleaning pur poses only and for use in an upright

position. Any other use is considered as improper use. ● A

high pressure washer operates with different levels of pressure

and cleaning detergents for various cleaning tasks and results.

Always follow instructions on detergents for use, emergency

and disposal. Do not operate the machine at temperatures ●

below 0°C. Never start a frozen machine, never use it indoor

and never cover it during use. This is considered improper

and wrongful use. Use of wrongful pressure, detergent and/

or applications may cause damage to machine, surfaces,

material and devices. All of the above is considered improper

and wrongful use. Gerni accepts no liability for any damage

resulting from any improper or wrongful use.

Safety devices and their functioning The machine automa-

tically stops when releasing the trigger. The machine will start

again when reactivating the trigger. The spray handle features

a locking device. When activated, the spray handle cannot be

operated. The machine has an automatic self-resetting thermo

protector. If the machine is overheated, the thermo protector

will cut the power supply. In this case, wait for the machine to

cool down. An integrated hydraulic safety valve protects the

system from excessive pressure.

Precautions The electric supply connection shall be made

by a qualiﬁ ed electrician and comply with IEC 60364-1. It is

recommended that the electric supply to this machine should

include either a residual current device that will interrupt the

supply if the leakage current to earth exceeds 30 mA for 30

ms or a device that will prove earth circuit. Use motor start/●

delayed fuses with characteristic D according to IEC 947-2 or

corresponding standards outside IEC. ● If the supply cord is

damaged, it must be replaced by an authorized Gerni distrib-

utor or similar qualiﬁ ed person in order to avoid a hazard. ●

No actions needed for adjusting machines marked with dual

voltage and frequency. Supervise children not to play with ●

the machine. ● The operator and any one in the immediate

vicinity of the site for cleaning should take action to protect

oneself from being struck by debris dislodged during operation.

● Always wear safety boots, respiratory mask, ear protection,

goggles and protective clothing during operation. ● The high

pressure generated by the machine is a particular source

of danger. Hold the spray lance ﬁ rmly with both hands. The

spray lance is affected by a kickback force and a sudden

torque during operation. See Part 3:3 for the actual size ●

of the kickback force. During transportation: Position the ●

machine horizontally on the backside and secure with straps.

Within EU High pressure washers shall not be used nor

maintained by children. The machine can be used by people

with reduced physical, sensory or mental capabilities or lack of

experience and knowledge if given supervision or instructions

concerning use of the machine in a safe way and understands

the hazards involved.

Outside EU High pressure washers shall not be used nor

maintained by children or untrained people or people with

reduced physical, sensory or mental capabilities or lack of

experience and knowledge.

Part 2:3 provides a general overview of the machine and op-

eration elements along with illustrated sections on preparation,

operation, water connection, storage, and user maintenance.

AUnpacking and preparing for use Follow illustrations in

B Connection to potable water mains High pressure

washers are not suitable for connection to the potable water

mains. Always check national regulations before connecting

the machine to potable water mains and use a back-ﬂ ow pre-

venter if required. Use ½" garden hose, 10-25 m. Follow ● ●

illustrations in B.

C Connection to other water sources You can connect the

machine to e.g. rain water vessels, rivers, lakes and cisterns

etc. and operate it in suction mode. Follow illustrations in C.

D Pairing of spray handle and machine Classic PG and

Super PG series only. After battery insert, D1.1, you have 2

min. to pair spray handle and machine. The light will ﬂ ash

orange when searching for the machine. When paired, the

light will turn off. Follow illustrations D1.1 to D1.5. If pairing

aborts, do pairing according to illustrations D2.1 to D2.5. Power

regulation is indicated by green light, see illustration D3.1 and

D3.2.

E Leaving the machine unattended > 5 min. See

listed warnings. Follow the illustrations in E.

F After use and storage After use always: Turn off the

machine. Empty machine and accessories of water to avoid

frost damage. Remove the plug from socket. Disconnect water

inlet hose. Wind up electrical cable and high pressure hose

to avoid damage of cable, high pressure hose and ﬁ ttings.

Storage of machine shall be frost free. Follow illustrations ●

in F.

G Maintenance, inspection and repair Maintenance of the

machine should always be done when starting up after long

time of storage. Before use, always inspect the machine

and equipment for damages. In case of damages, act accord-

ing to listed warnings. Do not attempt any maintenance not ●

described in the instructions. If the machine refuses to start,

stops, pulsates, pressure ﬂ uctuates, motor buzzes, fuse blows

or no water comes out, check the trouble shooting diagram in

Part 3:3 Troubleshooting, Serial speciﬁ c Technical Data and

Disposal. Any repair should always be made in Gerni autho-

rized workshop with original Gerni spare parts. ● User main-

tenance according to illustrations in G.

Part 1:4 Warranty Conditions

Warranty Conditions

Our goods come with guarantees that cannot be excluded

under the Australian Consumer Law. You are entitled to a

replacement or refund for a major failure and for compensa-

tion for any other reasonably foreseeable loss or damage.

You are also entitled to have the goods repaired or replaced

if the goods fail to be of acceptable quality and the failure

does not amount to a major failure. Gerni high pressure

washers for domestic use are warranted for 2 years from

the date of purchase by:

AUSTRALIA: Nilﬁ sk Pty LTd, Unit 1/13 Bessemer Street,

Blacktown NSW 2148, Phone: 1300 556 710, E-mail: War-

ranty.au@nilﬁ sk.com

NEW ZEALAND: Accent Tools Ltd, 232 Bush Rd, Albany,

Auckland 0632, Phone: 09 968 2610, E-mail: sales@ac-

cent-tools.co.nz

Equipment defects covered by this warranty will be repaired

or replaced by one of the service centres of the Gerni or-

ganisation. Find your local service agent here: http://www.

gerni.com.au/. If your high pressure washer or ac ces so ries

are handed in for repair, it must be followed by a description/

spe ci ﬁ ca ti on of the fault, and the original purchase receipt, or

a copy, must be enclosed. Packing and postage/carriage is

not covered by the warranty. This warranty is provided in ad-

dition to the other rights and remedies of the purchaser under

the laws in relation to the goods to which the warranty relates.

Guarantee repairs are made on the following con dit ions:

• that defects are attributable to ﬂ aws or defects in mate-

rials or workmanship (wear and tear as well as misuse

are not covered by the gu a ran tee).

• that the directions of the instruction manual have been

thoroughly observed.

• that repair has not been carried out or attempted by other

than Gerni-trained service staff.

• that only original Gerni accessories have been applied.

• that the product has not been exposed to abuse such as

knocks, bumps or frost.

• that only water without any impurities has been used.

• that the high pressure washer has not been used for

rental nor used com mer cial ly in any other way.

Repairs not covered by the guarantee conditions will be

invoiced. (i.e. malfunctions due to Causes men ti o ned in

section Troubleshooting of Part 3:3.

Please phone 1300 733 171 (Australia) or 09 9682610 (NZ)

for service or warranty assistance only after checking

possible causes in Part 3:3.

Specyfikacje produktu

Marka:	Gerni
Kategoria:	Myjka wysokociśnieniowa
Model:	Classic 100.5

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Gerni Classic 100.5, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Myjka wysokociśnieniowa Gerni

Gerni Classic 125.3 Instrukcja

1 Października 2024

Gerni Super 130.3 Instrukcja

1 Października 2024

Gerni Super 140.3 Instrukcja

1 Października 2024

Gerni Classic 100.5 Instrukcja

1 Października 2024

Gerni Classic 130.3 Instrukcja

1 Października 2024

Gerni 3300 Instrukcja

1 Października 2024

Gerni Super 160.3 Instrukcja

1 Października 2024

Gerni Super 150.3 Instrukcja

1 Października 2024

Gerni 7000 Instrukcja

1 Października 2024

Gerni Classic 110.5 Instrukcja

1 Października 2024

Instrukcje Myjka wysokociśnieniowa

Najnowsze instrukcje dla Myjka wysokociśnieniowa

Nilfisk C 110.3-5 PC X-TRA Instrukcja

15 Października 2024

Sun Joe SPX3001-RM Instrukcja

14 Października 2024

Worx WG629.1 Instrukcja

13 Października 2024

PowerPlus POWXG9025 Instrukcja

10 Października 2024

Cecotec HidroBoost 1400 Instrukcja

9 Października 2024

Einhell RT-HP 1648 TR Instrukcja

9 Października 2024

Einhell RT-HP 1545 Instrukcja

9 Października 2024

Einhell HR 160 Instrukcja

9 Października 2024

Anova H1800 Instrukcja

8 Października 2024

Anova H1950 Instrukcja

8 Października 2024