Instrukcja obsługi GeoVision GV-NET IO CARD V3.2

GeoVision nieskategoryzowany GV-NET IO CARD V3.2

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla GeoVision GV-NET IO CARD V3.2 (10 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/10

July 8, 2013 1

GV-NET/IO Card V3.2

The GV-NET/IO Card is a RS-485 / RS-232 interface converter, and provides 4 inputs and 4

relay outputs as well. It supports both DC and AC output voltages.

Key Features

• A USB port is provided for PC connection, and it is used with 30 DC output voltages.

• It can switch between two modes, NET/IO Card Mode and I/O Box Mode, which expand

its capability.

• Up to 4 GV-NET/IO Cards can be chained together when it is on the I/O Box Mode.

• It can act as an independent device when it is on the I/O Box Mode.

System Requirements

If the GV-NET/IO Card is listed as Proliﬁc USB-to-Serial Comm Port under Windows

Device Manager, GV-System version 8.2 or above is required. If the GV-NET/IO Card is

listed as XR21B1411 USB UART under Windows Device Manager, GV-System version

8.5.7.0 or above is required.

To see how to check the device name under Windows Device Manager, refer to Installing

USB Driver later in this Installation Guide.

Packing List

1. GV-NET/IO Card x 1

2. 20-Pin Ribbon Cable with 4 Connectors x1

3. RJ-11 to DB9 Cable x 1

4. RJ-11 to USB Cable x 1

5. 3-Pin Internal USB Cable x 1

6. 4-Pin to 4-Pin Mini Power Cable x 1

7. Installation Guide x 1

8. Software DVD x 1

July 8, 2013 2

Overview

GV Video Capture Card

RS-485 +

RS-485 -

Relay Out 1

Relay Out 2

Relay Out 3

Relay Out 4

Com

Input 1

Input 2

Input 3

Input 4

Ground

4-pin to 4-pin Mini

Power Cable

GV-NET I/O Card

20-pin

Ribbon Cable

1ON

1 2

GV-NET/IO Card connections

Note:

1. The supplied RJ-11 to DB9 Cable of older versions is not compatible with the GV-

NET/IO Card V3.1 or later.

Ve s 3r ion .1 or later

With a PC Mark

Older Versions

Without a PC Mark

2. When the GV-NET/IO Card V3.1 or later is in the I/O Box mode, it is incompatible with

the GV-IO 12-In Card of versions earlier than V3.

3. To prevent the noise interference in I/O operation, tightly screw the GV-NET/IO Card

V3.1 or later to the PC case.

July 8, 2013 3

4. Ensure to connect the GV-NET/IO Card to the 20-pin GV-NET/IO port on the GV-

Combo A Card as illustrated below. Wrong connection may damage the GV-NET/IO

Card or the GV-Combo A Card, causing Video Lost or an error message of “can’t ﬁnd

keypro” to pop up.

Specyfikacje produktu

Marka:	GeoVision
Kategoria:	nieskategoryzowany
Model:	GV-NET IO CARD V3.2
Kolor produktu:	Wielobarwny
Prąd:	3 A
Certyfikaty:	CE. FC
Liczba kanałów:	8 kan.
Zakres temperatur (eksploatacja):	0 - 50 °C
Wilgotność względna:	5 - 95 %
Napięcie wejściowe DC:	9 - 30 V
Połączenie z pc (personal computer):	Tak
Wartość nominalna napięcia wyjściowego:	250 V
Interfejs SCSI:	RJ-11, RS-422, RS-485
Kierunek sygnału:	Wejście/wyjście
Typ kanału:	Kanał przekaźnikowy