Instrukcja obsługi Genesis GMT15A

Genesis szlifierka GMT15A

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Genesis GMT15A (11 stron) w kategorii szlifierka. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/11
Multi-Purpose Oscillating Tool
Outil oscillant à usages multiples
Herramienta oscilante multiuso
GMT15A
Operator’s Manual
Manuel d’utilisation
Manual del Operario
888-552-8665
TOLL FREE
HELP LINE:
WEBSITE: www.genesispowertools.com
English
Multi-Purpose Oscillating Tool
Operator’s Manual GMT15A
MULTI-PURPOSE OSCILLATING TOOL
Operator’s Manual
SPECIFICATIONS
• Model: ------------------------ GMT15A
• Rated Power: ----------------- 120V~, 60Hz, 1.6A
• No-Load Speed: -------------- 21,000 /min (OPM)
• Net Weight: ------------------- 2.5 Lbs
Includes Oscillating Tool, Hook & Loop Sanding Pad, Assorted Sandpaper, Rigid Scraper Blade, 1-3/16" (30mm)
Flush Cut Saw Blade, HSS Segmented Saw Blade 3-1/8", Wrench, Accessory Adaptor and Accessory Storage
Case.
WARNING: To reduce the risk of injury, user must read and understand this
operator’s manual before operating this tool. Save this Manual for future reference.
Toll-Free Help Line: 1-888-552-8665
The Operation of any power tool can result in foreign WARNING:
objects being thrown into your eyes, which can result in severe eye damage.
Before beginning tool operation, always wear safety goggles or safety glasses
with side shields and a full face shield when needed. We recommend Wide
Vision Safety Mask for use over eyeglasses or standard safety glasses with side
shields. Always wear eye protection which is marked to comply with ANSI Z87.1.
Look for this symbol to point out important safety
precautions. It means attention!!! Your safety is
involved.
GENERAL SAFETY RULES
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and
other construction activities contains chemicals known to cause cancer, birth defects or
other reproductive harm. Some examples of these chemicals are:
• Lead from lead-based paints.
• Crystalline silica from bricks and cement and other masonry products.
• Arsenic and chromium from chemically treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure
to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust
masks that are specially designed to filter out microscopic particles .
WARNING: Read and understand all warnings, cautions and operating
instructions before using this equipment. Failure to follow all instructions listed below
may result in electric shock, fire and/or serious personal injury.
SAVE THESE INSTRUCTIONS
WEAR YOUR
FORESIGHT IS BETTER
THAN NO SIGHT
SAFETY GLASSES
3
English
WORK AREA SAFETY
• Cluttered benches and dark areas invite accidents.Keep your work area clean and well lit.
• Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.
• Keep bystanders, children, and visitors away while operating a power tool.
Distractions can cause you to lose control.
ELECTRICAL SAFETY
• . Power tool plugs must match the outlet Never modify the plug in any way. Do not use any
adaptor plugs in any earthed (grounded) power tools. Double insulated tools are equipped with a polarized
plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not
fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install a polarized
outlet. Do not change the plug in any way. Double insulation eliminates the need for the three wire grounded
power cord and grounded power supply system.
• Do not expose power tools to rain or wet conditions. Water entering a power tool will
increase the risk of electric shock.
• Avoid body contact with earthed or grounded surfaces such as pipes,
radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is
grounded.
• Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving parts. Damaged cords increase the risk of electric shock.
• When operating a power tool outside, use an extension cord suitable for
outdoor use. These cords are rated for outdoor use and reduce the risk of electric shock.
• Do not use AC only rated tools with a DC power supply. While the tool may appear to
work. The electrical components of the AC rated tool are likely to fail and rate a hazard to the operator.
PERSONAL SAFETY
• , Stay alert watch what you are doing and use common sense when operating a power tool. Do not use
tool while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating
power tools may result in serious personal injury.
• Use safety equipment. Always wear eye protection. Safety equipment such as dust mask, non-skid
safety shoes, hard hat, or hearing protection for appropriate conditions will reduce personal injuries.
• Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from
moving parts. Loose clothes, jewelry or long hair can be caught in moving parts. Air vents may cover moving
parts and should be avoided.
• Avoid accidental starting. Ensure the switch is in the off position before plugging in. Carrying power
tool with your finger on the switch or plugging in power tools that have the switch on invites accidents.
• Remove any adjusting keys or wrenches before turning the power tool on. A
wrench or key that is left attached to a rotating part of the tool may result in personal injury.
• Do not overreach. Maintain proper footing and balance at all times. Loss of balance can cause an injury
in an unexpected situation.
• If devices are provided for connection of dust extraction and collection
facilities, ensure these are connected and properly used. Use of these devices can
reduce dust related hazards.
• Do not use a ladder or unstable support. Stable footing on a solid surface enables better
control of the tool in unexpected situations.
• Keep tool handles dry, clean and free from oil and grease. Slippery handles cannot
safely control the tool.
TOOL USE AND CARE
• . Secure the workpiece Use clamp or other practical way to hold the workpiece to a stable platform.
Holding the workpiece by hand or against your body is unstable and may lead to loss of control.

Specyfikacje produktu

Marka: Genesis
Kategoria: szlifierka
Model: GMT15A

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Genesis GMT15A, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje szlifierka Genesis

Genesis

Genesis GMT15A Instrukcja

4 Września 2024
Genesis

Genesis GLRT08B-65 Instrukcja

4 Września 2024
Genesis

Genesis GRT2103-40 Instrukcja

3 Września 2024
Genesis

Genesis GROS2304 Instrukcja

3 Września 2024
Genesis

Genesis GBG600L Instrukcja

2 Września 2024
Genesis

Genesis GMT25T Instrukcja

1 Września 2024
Genesis

Genesis GBG800L Instrukcja

25 Sierpnia 2024
Genesis

Genesis GLMT08B Instrukcja

25 Sierpnia 2024
Genesis

Genesis GPS2303 Instrukcja

22 Sierpnia 2024

Instrukcje szlifierka

Najnowsze instrukcje dla szlifierka

Parkside

Parkside PEXS 270 A1 Instrukcja

13 Stycznia 2025
Makita

Makita 9562CVR Instrukcja

12 Stycznia 2025
Tryton

Tryton TDS125B Instrukcja

11 Stycznia 2025
Bosch

Bosch GWS 18V-8 Professional Instrukcja

5 Stycznia 2025
DeWalt

DeWalt DCG415B Instrukcja

3 Stycznia 2025
Einhell

Einhell TC-AG 18/115 Li Instrukcja

31 Grudnia 2025
DeWalt

DeWalt DWE4115 Instrukcja

30 Grudnia 2025
Black Decker

Black Decker 4292 Instrukcja

30 Grudnia 2025
Hazet

Hazet 9032M-36 Instrukcja

30 Grudnia 2025
Einhell

Einhell WS 230-4 Instrukcja

29 Grudnia 2024