Instrukcja obsługi Generac QT06030ANSN

Generac generator QT06030ANSN

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Generac QT06030ANSN (75 stron) w kategorii generator. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/75

STANDBY GENERATOR

OWNER'S MANUAL

This manual should remain with the unit.

A new standard of reliability

Serial Number QT

3.0L

60kW

Models

Cover126 Rev. A 04/08 Part No. 0G9024

Standby Generator Sets

Table of Contents

SECTION PAGE

SAFETY RULES ................................................ 1-1

INTRODUCTION .....................................................1-3

Read this Manual Thoroughly ...................................1-3

Operation and Maintenance ......................................1-3

How to Obtain Service ..............................................1-3

IDENTIFICATION RECORD .....................................2-1

Data Label ................................................................2-1

EQUIPMENT DESCRIPTION ...................................3-1

Equipment Description ................................................3-1

Engine Oil Requirements .............................................3-1

Coolant Recommendations...........................................3-1

ENGINE PROTECTIVE DEVICES ............................4-1

High Coolant Temperature Switch ............................4-1

Low Coolant Level Sensor .........................................4-1

Low Oil Pressure Switch ...........................................4-1

Overcrank Shutdown ................................................4-1

Overspeed Shutdown ................................................4-1

RPM Sensor Loss Shutdown .....................................4-1

DC Fuse ....................................................................4-1

FUEL SYSTEMS .....................................................5-1

Fuel Requirements ....................................................5-1

Natural Gas Fuel System ..........................................5-1

Propane Vapor Withdrawal Fuel System....................5-1

LP Fuel System .........................................................5-1

SPECIFICATIONS ...................................................6-1

Generator .................................................................6-1

Engine.......................................................................6-1

Cooling System .........................................................6-1

Fuel System ..............................................................6-1

Electrical System ......................................................6-1

Cold Weather Kit .......................................................6-2

GENERAL INFORMATION .......................................7-1

Generator AC Lead Connections ..................................7-1

Four-lead, Single-phase Stator ..................................7-1

Alternator Power Winding Connections ........................7-1

3-phase Alternators ..................................................7-1

INSTALLATION .......................................................8-1

Installation ...................................................................8-1

Preparation Before Start-up .........................................8-1

Prior to Initial Start-up .............................................8-1

Initial Inspection for QT Genset Start-up .....................8-1

Start-up Inspection ...................................................8-2

OPERATION ...........................................................9-1

Generator Control and Operation ................................9-1

Operating Unit with Manual Transfer Switch ...............9-1

Engine Start-up and Transfer ...................................9-1

Retransfer and Shutdown .........................................9-1

Operating Unit with Automatic Transfer Switch ...........9-1

MAINTENANCE .....................................................10-1

Maintenance Performed by Authorized

Service Facilities .....................................................10-1

Cooling System ..........................................................10-1

Checking Fluid Levels ................................................10-1

Check Engine Oil ....................................................10-1

Battery Fluid ...........................................................10-1

Engine Coolant .......................................................10-1

Maintenance Owner/Operator Can Perform ................10-2

Check Engine Oil Level ...........................................10-2

Check Battery .........................................................10-2

Exercise System ......................................................10-2

Inspect Cooling System ...........................................10-2

Check Engine Coolant Level....................................10-2

Perform Visual Inspection .......................................10-2

Inspect Exhaust System ..........................................10-2

Check Fan Belt ........................................................10-2

Inspect Engine Governor ........................................10-2

Changing Engine Oil ...............................................10-2

Changing the Engine Air Cleaner ............................10-3

Spark Plugs ............................................................10-3

Coolant Change .......................................................10-3

Miscellaneous Maintenance ........................................10-3

Cleaning the Generator ...........................................10-3

Battery ....................................................................10-3

Battery Maintenance ...............................................10-4

Battery Replacement ...............................................10-4

SERVICE SCHEDULE ...........................................11-1

30 kW - 150 kW Standby Gas Engine

Driven Generator Sets ............................................11-1

TROUBLESHOOTING ...........................................12-1

Troubleshooting Guide ...............................................12-1

NOTES

EXPLODED VIEWS & PARTS LISTS

WIRING DIAGRAMS & SCHEMATICS

WARRANTY

Content001 Rev. 0 08/05

1-1

INTRODUCTION

Thank you for purchasing this model of the Stationary Emergency

Generator set product line.

Every eﬀort was expended to make sure that the information and

instructions in this manual were both accurate and current at the

time the manual was written. However, the manufacturer reserves

the right to change, alter or otherwise improve this product(s) at

any time without prior notice.

READ THIS MANUAL THOROUGHLY

If any portion of this manual is not understood, contact the near-

est Authorized Service Dealer for starting, operating and servicing

procedures.

Throughout this publication, and on tags and decals aﬃxed to the

generator, DANGER, WARNING, CAUTION and NOTE blocks are

used to alert personnel to special instructions about a particular

service or operation that may be hazardous if performed incor-

rectly or carelessly. Observe them carefully. Their deﬁnitions are

as follows:

INDICATES A HAZARDOUS SITUATION OR

ACTION WHICH, IF NOT AVOIDED, WILL RESULT

IN DEATH OR SERIOUS INJURY.

Indicates a hazardous situation or action which,

if not avoided, could result in death or serious

injury.

Indicates a hazardous situation or action which,

if not avoided, could result in minor or moderate

injury.

NOTE:

Notes contain additional information important to a procedure

and will be found within the regular text body of this manual.

These safety warnings cannot eliminate the hazards that they

indicate. Common sense and strict compliance with the special

instructions while performing the action or service are essential to

preventing accidents.

Four commonly used safety symbols accompany the DANGER,

WARNING CAUTION and blocks. The type of information each

indicates is as follows:

n

This symbol points out important safety

information that, if not followed, could

endanger personal safety and/or property of

others.



This symbol points out potential explosion

hazard.



This symbol points out potential ﬁre hazard.



This symbol points out potential electrical

shock hazard.

The operator is responsible for proper and safe use of the equip-

ment. The manufacturer strongly recommends that the operator

read this Owner's Manual and thoroughly understand all instruc-

tions before using this equipment. The manufacturer also strongly

recommends instructing other users to properly start and operate

the unit. This prepares them if they need to operate the equipment

in an emergency.

OPERATION AND MAINTENANCE

It is the operator's responsibility to perform all safety checks, to

make sure that all maintenance for safe operation is performed

promptly, and to have the equipment checked periodically by

an Authorized Service Dealer. Normal maintenance service and

replacement of parts are the responsibility of the owner/operator

and, as such, are not considered defects in materials or workman-

ship within the terms of the warranty. Individual operating habits

and usage contribute to the need for maintenance service.

Proper maintenance and care of the generator ensure a minimum

number of problems and keep operating expenses at a minimum.

See an Authorized Service Dealer for service aids and accessories.

Operating instructions presented in this manual assume that the

generator electric system has been installed by an Authorized

Service Dealer or other competent, qualiﬁed contractor. Installation

of this equipment is not a “do-it-yourself” project.

HOW TO OBTAIN SERVICE

When the generator requires servicing or repairs, simply contact

an Authorized Service Dealer for assistance. Service technicians

are factory-trained and are capable of handling all service needs.

When contacting a dealer about parts and service, always supply

the complete Model Number, Serial Number and Type Code (where

applicable) from the DATA LABEL that is aﬃxed to the unit.

AUTHORIZED SERVICE DEALER LOCATION

To locate the nearest AUTHORIZED

SERVICE DEALER, please call this number:

1-800-333-1322

or locate us on the web at:

www.generac.com

Safety 001 Rev. d 06/10

Safety Rules

Specyfikacje produktu

Marka:	Generac
Kategoria:	generator
Model:	QT06030ANSN
Kolor produktu:	Biały
Typ produktu:	All-in-One PC
Wbudowane głośniki:	Tak
Moc wyjściowa (RMS):	6 W
Wyjścia słuchawkowe:	1
Gniazdko wyjścia DC:	Tak
Zasilacz sieciowy:	Tak
Typ HD:	Full HD
Długość przekątnej ekranu:	21.5 "
Obsługiwane typy kart pamięci:	MMC,Memory Stick (MS),SD
Prędkość transferu danych przez Ethernet LAN:	10,100,1000 Mbit/s
Ilość portów Ethernet LAN (RJ-45):	1
Rozdzielczość:	1920 x 1080 px
Natywne proporcje obrazu:	16:9
Technologia dotyku:	Multi-touch
Ekran dotykowy:	Tak
Taktowanie procesora:	3.7 GHz
Typ procesora:	Intel® Core™ i3
Model procesora:	i3-6100
Wi-Fi:	Tak
Standardy Wi- Fi:	802.11b,802.11g,Wi-Fi 4 (802.11n)
Liczba portów USB 2.0:	2
Przewodowa sieć LAN:	Tak
Zintegrowany czytnik kart:	Tak
Kompatybilność 3D:	Nie
Waga wraz z opakowaniem:	11160 g
Podstawowy standard Wi-Fi:	Wi-Fi 4 (802.11n)
Producent procesora:	Intel
Liczba rdzeni procesora:	2
Typ pamięci wewnętrznej:	DDR3L-SDRAM
Pamięć wewnętrzna:	4 GB
Ilość portów USB 3.2 Gen 1 (3.1 Gen 1) Typu-A:	4
Zainstalowany system operacyjny:	Windows 10 Home
Typ slotów pamięci:	SO-DIMM
Maksymalna pojemność pamięci:	16 GB
Gniazdo procesora:	LGA 1151 (Socket H4)
Układ płyty głównej:	Intel® H110
Ilość portów HDMI:	1
Mikrofon:	Tak
Dołączona myszka:	Tak
Kształt ekranu:	Płaski
Wbudowana kamera/aparat:	Tak
Szerokość urządzenia (z podstawą):	561.67 mm
Głębokość urządzenia (z podstawą):	50.86 mm
Wysokość urządzenia (z podstawą):	368.78 mm
Waga (z podstawą):	9970 g
Nośniki:	HDD
Moc adaptera AC:	120 W
Wbudowany mikrofon:	Tak
Podświetlenie LED:	Tak
Suma megapikseli:	1 MP
Gniazda pamięci:	2
Pojemność HDD:	1000 GB
Całkowita pojemność przechowywania:	1000 GB
Procesor ARK ID:	90729
Technologia Intel® Hyper Threading (Intel® HT Technology):	Tak
Technologia Intel® Turbo Boost:	Nie
Technologia Intel® Quick Sync Video:	Tak
Technologia Intel® InTru™ 3D:	Tak
Technologia Intel® Clear Video HD (Intel® CVT HD):	Tak
Nowe instrukcje AES (Intel® AES-NI):	Tak
Technologia Udoskonalona Intel SpeedStep:	Tak
Technologia Intel® Trusted Execution:	Nie
Maksymalna konfiguracja CPU:	1
Intel® Enhanced Halt State:	Tak
Intel® Clear Video Technology dla MID (Intel® CVT for MID):	Tak
Intel® VT-x with Extended Page Tables (EPT):	Tak
Intel® TSX-NI:	Nie
Intel® Secure Key:	Tak
Intel® 64:	Tak
Intel® OS Guard:	Tak
Technologia Wirtualizacji Intel® (Directed I/O) (VT-d):	Tak
Technologia Intel® Clear Video:	Tak
Technologia Intel® Software Guard Extensions (Intel® SGX):	Tak
Wersja technologii Intel® Secure Key:	1.00
Technologia virtualizacji Intel® (VT-x):	Tak
Wersja Intel® TSX-NI:	0.00
Typ pamięci procesora:	L3
Cache procesora:	3 MB
Wskaźnik magistrali systemowej:	8 GT/s
Litografia procesora:	14 nm
Liczba wątków:	4
Tryb pracy procesora:	64-bit
Nazwa kodowa procesora:	Skylake
Maksymalna pamięć wewnętrzna wspierana przez procesor:	64 GB
Typy pamięci wspierane przez procesor:	DDR3L-SDRAM,DDR4-SDRAM
Taktowanie zegara pamięci wspierane przez procesor:	1333,1600,1866,2133 Mhz
Przepustowość pamięci obsługiwana przez procesor ( max ):	34.1 GB/s
Kanały pamięci wspierane przez procesor:	Podwójny
Pamięć ECC wspierana przez procesor:	Tak
Maksymalna liczba linii PCI Express:	16
Konfiguracje PCI Express:	1x16,1x8+2x4,2x8
Termiczny układ zasilania (TDP):	51 W
Bezkonfliktowy procesor:	Tak
Stepping:	S0
Instrukcje obsługiwania:	SSE4.1,SSE4.2
Kod procesora:	SR2HG
Technologia Execute Disable Bit (EDB):	Tak
Stan spoczynku:	Tak
Technologie Thermal Monitoring:	Tak
Skalowalność:	1S
Wbudowane opcje dostępne:	Tak
Typ magistrali:	DMI3
Wielkość opakowania procesora:	37.5 x 37.5 mm
Prędkość zegara pamięci:	1600 Mhz
Karta graficzna on-board:	Tak
Model karty graficznej on-board:	Intel® HD Graphics 530
Szeregowe porty komunikacyjne:	1
Wersja gniazd typu Slot (PCI Express):	3.0
Parytet FSB:	Nie
Konfigurowalne niższe TDP:	- W
Tcase:	65 °C
Rozgałęźnik T:	- °C
Napięcie pamięci wspierane przez procesor:	1.35 V
Magistrala systemowa:	- Mhz
Seria procesora:	Intel Core i3-6100 series
Generowanie procesora:	Intel® Core™ i3 szósta generacji
Wbudowana bazowa częstotliwość procesora:	350 Mhz
Dynamiczne taktowanie wbudowanej karty graficznej (max):	1050 Mhz
Maksymalna pamięć wbudowanej karty graficznej:	1.7 GB
Liczba monitorów wspieranych (wbudowana karta graficzna):	3
Wbudowana karta graficzna wersja DirectX:	12.0
Wbudowana karta graficzna wersja OpenGL:	4.4
Model dedykowanej karty graficznej:	Niedostępny
ID wbudowanego urządzenia graficznego:	0x1912
Typ zintegrowanej karty graficznej:	Intel® HD Graphics
Intel® Small Business Advantage (Intel® SBA):	Tak
Intel® Wireless Display (Intel® WiDi):	Tak
Intel® zabudowy technologii wizualnej:	Tak
Grafika Intel® HD:	Tak
Technologia Intel® My WiFi (Intel® MWT):	Nie
Technologia Intel® Identity Protection (Intel® IPT):	Tak
Technologia Intel® Anti-Theft (Intel® AT):	Nie
Intel® Insider™:	Tak
Intel® Stable Image Platform Program (SIPP):	Nie
Technologia Intel® FDI:	Nie
Intel® Flex Memory Access:	Nie
Intel® Fast Memory Access:	Nie
Intel® Smart Cache:	Tak
Intel® Demand Based Switching:	Nie
Układ graficzny i litografia IMC:	14 nm
Specyfikacja systemu Thermal Solution:	PCG 2015C
Wersja Intel® Stable Image Platform Program (SIPP):	0.00
Intel® Small Business Advantage (SBA) wersja:	1.00
Technologia Intel® Dual Display Capable:	Nie
Intel® Rapid Storage Technology:	Nie
Wersja technologii Intel® Identity Protection:	1.00
Liczba zainstalowanych dysków:	1
Napędy optyczne:	DVD Super Multi
Architektura systemu operacyjnego:	64-bit
W zestawie klawiatura:	Tak
Rodzaj pamięci:	DIMM/SO-DIMM
Funkcja USB Sleep-and-Charge:	Tak
Porty USB Sleep-and-Charge:	1
Liczba zainstalowanych HDD:	1
liczba portów eSATA/USB 2.0:	888888
Architektura 64-bitowa:	Tak
Odłączany ekran:	Nie
Tryb podtrzymania:	Nie